Question about 2005 Acura MDX
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The TPMS light will be visible in your instrument panel like your parking brake would if activated. The TPMS function is activated automatically once any of your tires are improperly inflated. Furthermore, it will identify which tire needs attention.
Posted on Mar 14, 2009
Yes. Put a jack under the motor and remove 3 bolts from side of engine and the long center pivot bolt in mount and the 2 bolts that go top down into the frame and loosen the 2 bolts below mount. Jack up the motor until you can separate the mount, leaving the engine side in and removing the frame side. The engine side can be moved out of the way without completely removing.
Posted on Aug 08, 2009
Testimonial: "answered the question completely and thoroughly!"
SOURCE: 2004 Acura MDX Water Leak
The 2002 MDX I worked on turned out to be a drainage problem . Seems the factory installed foam in the bottom of the hinge pillar post which blocked the drain holes . Take off the mud flap , remove enough of the splash shield to access the bottom of the hinge pillar and drill a half inch hole at the front lower corner aiming the drill slightly upward ( be sure to protect the bare metal) .Water gushed out when I did this. For extra ins. remove the kick panels and check for two holes a few inchs from the floor, plug and chaulk these holes. Hope this worksfor you too
Posted on Jan 07, 2010
the cheapest way to replace your window motor would be to go to a salvage yard to get the replacement. they are not very hard to install the hardest part of the job is removing the door panel without breaking the clips that hold it in place. just slide a big flathead screwdriver in between the plastic door panel and the metal door frame and twist the screwdriver that way the clips wont break on you.
Posted on Mar 09, 2010
Testimonial: "Thank you for the advice! This is what I was thinking as well."
Tips for a great answer:
Jun 24, 2015 | 2008 Acura Mdx
Feb 21, 2015 | 2005 Acura MDX
Oct 17, 2014 | 2005 Acura MDX
Apr 04, 2013 | 2005 Acura MDX
Aug 29, 2010 | 2005 Acura MDX
May 15, 2010 | 2004 Acura MDX
Feb 12, 2010 | 2005 Acura TL
Sep 14, 2009 | 2005 Dodge Neon
May 07, 2009 | 2005 Acura MDX
591 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: