Question about Saturn SW

1 Answer

We have a 1998 Saturn SW1 station wagon and the motor mount broke and we need to fix it. Any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

The top and side mounts are easy, unless you snap off a bolt. To do the side dog bones, remove the right front service panel behind the wheel, yes you have to take the tire off, and remove the battery tray on the left side. Remove the long screws holding the tray on through the left front wheel well. Replacing the dog bones is take out the two bolts and then bolt the new ones in. Top mount is simply loosen the nuts, remove and replace, tricky part is to support the engine while you swap the mount. Bottom mount takes a little more time and a jack. If you never changed the tensioner, you may want to do this while you have that right front service panel open.

Posted on Sep 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt diagram for 2001 Saturn LW200 (station wagon)?


Go autozone.com type in you make and model it will give you the diagram

Sep 03, 2012 | 2001 Saturn Lw 4dr Wagon

1 Answer

Diagram for serpentine belt for a 2000 saturn station wagon 2.2


Try this link. This was as far into the diagram list as I could get with the information you provided. You will need to select the Model of the Saturn, Station wagon is not an option, and the next section should be to select the year then it will show you the different diagrams for the Serpentine and timing belts for all motors installed in the vehicle. You will have to locate the actual diagram you need but it will be there.

Jun 25, 2011 | Saturn SL1 Cars & Trucks

1 Answer

Where is the flasher relay on a 1995 Saturn SW1? Don't see it in the instrument panel fuse box in the console.


For 1995 Saturn SW1 1.9L MFI SOHC 4cyl the Flasher is located: Front seating area, center, under dash, front of console, mounted in junction block.

Good luck.

Nov 06, 2010 | 1993 Saturn SW1

1 Answer

Oil leaking into sparkplug wells


oil on the spark plugs means either you have bad valve seals or bad rings. Valve seals are fairly cheap and easy to replace. Bad rings requires a full rebuild of the motor.
Also, did you over heat this vehicle?
My Blog

Jun 08, 2010 | 1998 Saturn SW

2 Answers

1993 Saturn SW1 station wagon


No, the transmission can be removed without doing that. You will need to support the engine.

Mar 16, 2010 | 1993 Saturn SW1

1 Answer

Transmission filter {spin on} keeps loosening off. Replaced filter twice now still keeps coming loose. Any ideas? 1993 Saturn Wagon 1.9L Engine code 7


First off an engine code 7 would mean it is a DOHC and an SW2, not SW1.

Do you have a dealer filter or aftermarket? The aftermarket have fitment issues (as well as flow issues) and it is best to use a dealer one.

Second, make sure the magnet is not on the filter area where it spins on. That can be removed during the first transmission fluid and filter change. It is only put on from the factory and removed afterward.

Feb 02, 2010 | 1993 Saturn SW1

1 Answer

How do you replace front brake pads on 1998 saturn station wagon


jack up car, remove wheel. take 2 bolts out holding caliper to caliper bracket. take old pads off, compress the piston until its flush with the caliper with a c-clamp. new pads on, grease the caliper bolts and bolt it back on. put wheel on, lower jack.

Dec 10, 2009 | 1998 Saturn SW

1 Answer

99 Saturn SW1. Mystery Wipers


it would appear that in the process of the engine mount breaking and replacing it that one of the wire harnesses was damaged and may have some wires that need to be insulated.

Sep 02, 2009 | 1999 Saturn SW

1 Answer

1993 Saturn SW styles


SW1 is a single overhead cam. SW2 is a dual overhead cam both have multi port injection.

Dec 16, 2008 | 1993 Saturn SW1

1 Answer

I'm wondering about 1993 Saturn station wagons. One website describes two models, the sw1 and the sw2. Another distinguishes two fuel injection types for that year's wagons, mfi and tbi. Do they...


mfi = multi port injection
tbi = throttle body injection
the way to tell is look on the intake plenum and see if there is a "carb" sitting there. That's tbi.
Intake plenum with 4 or more fuel lines going to each cylinder is a "MPI" (multiport) system....accordianman

Dec 16, 2008 | 1993 Saturn SW1

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...