Question about 1991 Dodge Ram 150

1 Answer

1989 dodge ram 150 5.2 motor shutters

My 1989 dodge ram 150 with a 5.2 everytime i stop the motor kind of shutters and stalls out. what the problem?

Posted by on

  • 4 more comments 
  • Anonymous Mar 19, 2014

    shuts off when gets hot, cranks when cool

  • Anonymous Mar 21, 2014

    Jerking going up hills

  • Anonymous Mar 21, 2014

    1989 dodge ram jerks

  • Anonymous Mar 21, 2014

    1989 dodge ram 150 jerks

  • Anonymous Mar 21, 2014

    1989 dodge ram 150

  • Anonymous Mar 22, 2014

    why does it have no noid

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

Start the engine and get it up to operating temperature. Take a spray bottle with water in it and spray the vaccum hoses and around the intake gaskets. If the water affects your idle, you possibly have a very common intake gasket leak. That motor is well know for vacuum leaks around the intake gaskets. You can also try spraying carb cleaner, but be very careful with that. Hope this helps. Sounds like a vacuum leak to me.

Posted on May 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What kind of oil does a 86 dodge ram 150 take


That information is in the user manual. It also depends on what type of duty the dodge is encountering. Could be light could be very heavy, I do not know. You may stop by your friendly dealer, listen to a short sales pitch and get the answer from him if you do not have the manual. You may get it from one of the following links.



https://primralismo.files.wordpress.com/2015/04/1986-dodge-ram-150-manual.pdf

Get the Best Priced Dodge D150 Repair Manual

https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=86+dodge+ram+150+manual

May 01, 2015 | Dodge Cars & Trucks

1 Answer

I need to know the location of the inertia switch on a 1989 dodge ram 150 pickup truck


there is no inertia switch only ford uses them check for power to the pump if its there replace the pump if not check fuses and relays

Feb 25, 2014 | 1992 Dodge Ram 150 Club Cab

1 Answer

1989 Dodge Ram 250 with 318 motor, oil pressure gage has quit working, engine oil is at proper level, someone said that there is some kind of an oil service switch that my need replaced.


you have an oil pressure sending unit located at rear of engine next to distributor. that would cause the oil gauge not to work. also look for a short in electrical wires to oil sending unit. hope this will help!!!

Apr 07, 2010 | 1989 Dodge Ram D-Series Pickups

2 Answers

1989 dodge ram 150 4/w drive pickup has no oil pressure showing on the gage, driving or sitting still.


You need to have a oil pressure guage hooked up to see if you have a bad guage, sending unit to the guage, or if your oil pressure is actually low. Any garage should be able to do this, if you can't get one.

Aug 03, 2009 | 1989 Dodge Ram D-Series Pickups

1 Answer

03 dodge ram 1500 hesitates and tries to stall when in drive at stop sign or light.The tachometer fluctuates up then down hesitates then stalls.


Remove IAC (idle speed control) motor, clean with throttlebody spray cleaner & the port (hole)it came out of. Re-install & try it. If it cures it for a while & does it again, replace the IAC motor.

Jun 04, 2009 | 2004 Dodge Ram 1500

4 Answers

92 dodge 318 truck engine runs til you stop, then stalls when put


2 or 4 barrel?
If auto choke, chk yhat for opening.
Msnifold vac fluctuating or thats just the range? Sounds a little high. neck time you start the motor, give the throttle a snap and vck the coke play position Cold running the choke should be 1/4 - 1/3 open. If you need info on how to adjust let me know Hot, or at operating temp, choke should be wide open. Good luck.

May 17, 2009 | 1992 Dodge Ram 150 Club Cab

2 Answers

Stalling problem when coming to a stop


Do you know what your AIS motor (automatic idle speed) is on your throttle body.Usually held on with torx screws 2 or 3. Thses are pretty well known for gumming up & sticking. It adjusts your idle automatically under load etc. If your take it off, spray it with throttle body cleaner & be sure to spray some in the port (hole it came out of) before you re-assemble it. Sometimes this will cure it or at least improve it enough that you know your in the right area, if replacement part needed.

Oct 24, 2008 | 2000 Dodge Ram 1500 Truck

1 Answer

1989 Dodge Ram / Cold Start Trouble


clean out the carb and fit an inline fuel filter between the pump and the carb .

Oct 24, 2008 | 1989 Dodge Ram 50

1 Answer

88 dodge ram le 150 318 carburated


Yes the rear seal on the rearend would cause a leak and would have to be pressed in.

Oct 09, 2008 | 1988 Dodge D-Series Pickups

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

686 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...