Question about 1999 Dodge Ram

1 Answer

We have a 1999 Dodge Ram 1500 with a 318. It ran fine the night before, parked it went out next morning would not start. The engine turns over but doesnt start. We replaced the plugs, plug wires, distributor cap, rotor button and coil however we are still having the same problem. The fuel pump kicks on and there is fuel pressure. Can you give us an idea of what could be wrong?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Check the plugs to the computer on the passenger side of the firewall. there are three of them, unplug them, wait ten or eleven minutes and plug them back in. if that does not work you might have a computer problem or a bad ground wire at the battery
By the way my 99 has the original plugs, wires, rotor, dist cap, and coil, from the factory. I have driven it every day for 11 yrs. over 12,000 foot mountain passes, four wheeling trips every weekend, and dozens of trips across the country. I have over 260,000 miles on it. I think you get the point...
By the way diesel boys this is a gas engine simply well maintained!!!!!!!!!!!!!!!

Posted on Sep 19, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76630 Answers

SOURCE: distributor firinng order wiring diagram 1998 ram 1500 318 4x4

GO TO THE LINK BELOW FOR INFO U NEED.

http://autorepair.about.com/library/firing_orders/bl-fo-4555.htm

Posted on Nov 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition feed fuse 16 blows when i turn on the key


Hi,
You have a 'short circuit' in the system or a bad ground somewhere. Go online and search on the Dodge/Plymouth/Chrysler forums for this issue. I've read about myself but don't recall the common cause.

GL,
Td

Oct 03, 2012 | Plymouth Voyager Cars & Trucks

2 Answers

1999 dodge ram truck 1500 4x4 worked fine park it and next morning tried to start truck but all bell and lights come on but 30 amp ignition run fuse keeps blowing and truck wont start ran fine when...


This 30 amp fuse, If it blows when cranking, it is usually the starter dragging, if it blows by just turning the key on it is usually the fuel pump drawing too many amps.
I hope this helps.

Sep 16, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

I have a 99 dodge ram, had it since new, low miles, question is, truck ran fine, pulled it into the driveway, went out to start it the next morning, and nothing, no spark, changed the coil, still no spark,...


Have you looked at your main fuse under the hood, the big ones run the starter and high amp accerories. ther located in the plastic box under the hood.

Feb 25, 2011 | 1999 Dodge Ram

1 Answer

I have a 1999 dodge mach 3 conversion van, v-6 3.9. It has been stalling off and on and sometimes in the morning would not start like it was flooding up... I cleaned the IAC motor and ran fine for a week...


try replacing the camshaft positioning sensor.this little sensor can cause you more headaches then an exwife but at least the sensor is easily cured,any way start there its inexpensive and a fairly easy job.Hope this helps good luck.

Jan 02, 2010 | 1999 Dodge Ram

1 Answer

1997 mpv mini van runs great. While traveling i drove from SC to Atl GA....parked and went into motel for evening...the next morning i had very difficult time getting it re started....Like it was not...


I think you should check your battery and alternator.If they both check good you may have a battery draw,something draining the battery over night.Check your doors make sure they are closing like they should.

Jul 28, 2009 | 1997 Mazda MPV

1 Answer

My 1997 Dodge Avenger's engine won't start


Try cam and/or crank sensor. If crank to cam timing isn't detected properly it'll crank all day but won't start. I had similar problem on my 2.5L V6 Avenger....drove home fine, no engine light, next morning it cranked, but wouldn't start. The crank sensor was faulty.

Jan 11, 2009 | 1997 Dodge Avenger

Not finding what you are looking for?
1999 Dodge Ram Logo

595 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...