Question about 1987 Chrysler LeBaron Town & Country

1 Answer

Test code TC-153A on a 1997 Chrysler Town and Country LXi

What does a Test code TC-153A on a 1997 Chrysler Town and Country LXi mean? The "Service Engine Soon" light was on. The last time I took the car to the dealer for a "check engine" light, they said it just needed to be reset (i.e. it goes on every X miles to get you in to the dealer), so I'm skeptical. I took it to a local service station (not a dealer). They said the computer reported this code, with the message: "Battery Temerature Sensor Voltage Too low or too high." What does this mean? Should I be concerned about it or just keep driving. The car seems to work fine

Posted by on

  • JWRamsey Jun 05, 2008

    Told that there was a preasure leak and the gas cap was replaced. Came on again and told it will reset after three new engine start-ups. They also didnt want to throw darts and not really find the problem. They asked when the last time I put gas in the tank. Should I be concerned.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

Dont be worried at all. The battery temp sensor isnt very important, most cars dont even have them. The only thing is you will have that light on. Good luck!!

Posted on May 15, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where is the camshaft sensor located on 1996 Chrysler town and country lxi

Well the sensor should be on the drivers side just under the valve cover and it looks like a circle with a plug in it.I think your problem though is the timing belt is off a tooth it will run fine but being a tooth off will keep that light on.

Jul 09, 2014 | 1996 Chrysler Town & Country

1 Answer

Camshaft sensor

Someone would need to test the cam sensor. The code is probably saying the sensor is not giving the right info to the computer.
You may need a scanner to diagnose it.

Sep 25, 2012 | 1997 Chrysler Town & Country

1 Answer

I am driving chrysler town and country 1997 and this mornind the light check engine soon went on. What should be the problem and should i drive a car now?

Check engine mean that some system of engine is faulty. Check oil and coolant levels and if they are ok - basically you can drive your car.
Try to find someone with diagnostic scanner for your car to clarify type of error.

May 20, 2011 | 1987 Chrysler LeBaron Town & Country

2 Answers

Firing order for 1997 town and country LXI 3.8 engine

1997 Chrysler Town & Country 2WD 3.8 liter V-6 VIN "L"


Hope this help; remember rated this post.

Apr 09, 2010 | 1997 Chrysler Town & Country

1 Answer

Service Engine Soon light has just come on after replacing relay for 2 fan motors to cool engine. What does the Service Engine Soon mean? First time seeing this.

It usually indicates that the computer has identified a fault in one of the car's systems. Take the car to an autoparts store and have them scan the computer for any fault codes stored there. Most parts stores will perform the scan at no charge. Hope this helped and best wishes.

Jul 30, 2009 | 1996 Chrysler Town & Country

1 Answer


you need to change the oxygen sensor. it will soon cause you problems. after you need to take it in to  erase the code.

Apr 20, 2009 | 1997 Chrysler Town & Country

2 Answers

What is a code 66

I checked on my Mitchell's program and I don't show a code 66. Try to get the codes again. Turn the key on/off 3 times what watch the flashes. I can get you the information to you soon.

Jun 22, 2008 | 1997 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

487 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides