Question about 2006 Ford Explorer

1 Answer

Front diff.leaks not on cover on seal by the drive shaft

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,537 Answers

You need to replace the seal. If you are describing the driveshaft coming from the Transfer case, the part would be called a Pinion seal. You can price the repair by using this description and the Repair shop will know what you are talking about.

Sometimes people refer to the smaller shafts between the wheels and the front differential as driveshafts too. They are cv shafts or output shafts.

Posted on Sep 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I04 Lincoln Navigator. Front differential pass seal leak. remove the drive shaft and unbolt the flange. the inner flange does not have a bolt to access the seal and bearing. How is the seal accessed?


If I understand you correctly the drive shaft you took out is actually a CV axle. The inner axle shaft goes into the diff. That is held in with a snap ring in the diff. It might not come out easy, sometimes they do, use a pry bar to pop it out. Be careful not to break or damage the aluminum housing. There have been times where I had to use a strong air hammer to beat on the back side of that flange to get the axle shaft out... It's sort of like taking a CV axle out of a front wheel drive car.

Oct 27, 2017 | Lincoln Cars & Trucks

1 Answer

Front diff.seal leaks


Remove the front drive shaft remove the drive yoke off the pinion shaft remove the old seal install new seal install front drive shaft. PS check pinion bearing play before removing drive yolk. if it is loose then you might also need bearings

Oct 21, 2015 | Ford Explorer Cars & Trucks

1 Answer

How to replace front differential seal on 2007 4.7 toyota tundra


This is not easy....You will need air tools ,spray penetrate,seal remover,hammer,and Jack stands..Seal installation tool,.All proper tools..safety glasses.correct seal replacement.,new lock nut...Set park brake,block rear wheels,raise vehicle front and safely place jack stands under each side of lower control arms..Spray lube front drive shaft mounting hardware and lock nut that holds Yoke on front diff..Let it set to penetrate..put vehicle in neutral..Mark shaft to yoke location and direction perfectly because it has to be installed in perfect timing exactly how it was removed..,Remove drive shaft..Remove lock nut and yoke from front diff...You will have to hold yoke while removing lock nut because it will spin..PROTECT HANDS..( These can be VERY DIFFICULT to remove..Sometimes they have to be heated..You will need a yoke removal tool if it doesn't tap off with hammer...Mark exactly the yoke to spline location before removal..You can take close up photos however Mark it also to be sure...If you re-install it wrong it will vibrate terribly..Once yoke is removed You can remove seal.Make sure the new seal is correct...CAREFULLY..DO NOT DAMAGE SPLINES WHILE REMOVING..Sometimes even the perfect seal remover will damage splines..So cover it to protect spline threads..Clean all areas once seal is removed..Make sure nothing is pitted or damaged...Install new seal with installation tool..Lightly,perfectly tap it flush with diff..You can use old seal to install new seal if you don't have installation tool But only a pro should do that...Once in place Line drive shaft yoke with your marks and tap it on ..Use NEW LOCKNUT AND TORQUE IT TO SPEC..Install drive shaft as marked..torque to spec..Lower truck and check fluid..Complete..

Dec 13, 2014 | Toyota Cars & Trucks

1 Answer

How do i replace the front axle seal drivers side n a 2004 escalade


remove axle nut, remove lower ball joint nut, pop drive shaft loose with punch or wood dowel , pop lower ball join from knuckle pull up push axle out of knuckle , pull back knuckle and tie in place pop out axle with big screwdriver or pry bar ,remove seal replace.

Aug 01, 2012 | 2004 Cadillac Escalade

1 Answer

I had a leaking rear diff cover so I dropped the oil and clean the cover and the rear diff where the cover mates up and silconed the cover and reinstalled and then it start leaking out the front of the...


If the seal is leaking, it will need to be replaced, if you have a service manual, it will show you the procedure to replace the seal. DO NOT try to replace the seal without following the proper guidelines as input bearing damage can occur. After the repairs are made, be sure to to clean the vent tube/valve on the diff. to avoid pressure build up that will cause early seal failure, this vent should also be cleaned at every oil change.

Aug 16, 2011 | 2000 Dodge Durango

1 Answer

Ford 2001 econoline rear axle oil leak at drive shaft seal; how to repair/replace seal ?


if it is leaking from the front of the diff where the drive line goes into it you have to drop the rear of the drive shaft from the diff, if you look at the flange on the diff where the driveshaft bolted to you will see a nut, possibly about 25 to 30mm, you have to remove the nut and remove the flange off the spline of the input shaft of the diff, the nut is really tight and it is difficult to get enough pressure on the nut to "crack it" while the car is on the ground as there is not enough room to get a long bar on the socket to remove the nut. if you happen to get the nut loose and you remove the flange get a big screwdriver and pry the seal out of the diff, check the surface where the seal ran on the input shaft as it may have a groove worn into it, if it has the groove the new seal will still leak, they make a sleeve you can slide over the shaft to give the seal a good surface to run on, we call them a speedy sleeve here but not sure what they may call them there. replace everything in the reverse order that you removed it and don't forget to tension the big nut that holds the flange onto the input shaft

Jun 15, 2010 | 2003 Ford E150

1 Answer

Rear differential leak?


leaking where? axle shafts? pinion seal? diff cover?
should inspect diff internals and bearings-may require overhaul not just
seal replacment. also check vent tube-if plugged will cause all seals to leak.

Apr 15, 2010 | 1990 Ford Bronco

2 Answers

Rear drive shaft seal leaking


Yes, but you will need to mark the yoke position and exact number of turns to remove the nut or you will change ring and pinion gear lash setting when re-installing it. You can use a large pipe wrench to hold the yoke still while tightening, or get a special tool made for that.

May 04, 2009 | 1998 Ford F150 Regular Cab

1 Answer

Seal on front Diff drive shaft


The red coating on the seal is sealer, once it gets hot it softens and keeps fluid from going around the seal barrel, this can really get stuck, a small slide hammer with a screw on the end works well for the really stubborn ones.

Nov 26, 2008 | 1997 Jeep Cherokee Country

Not finding what you are looking for?
2006 Ford Explorer Logo

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...