Question about Chevrolet Lumina

1 Answer

My engine light is on the code come up p1870 but the car work good . how can it be fix

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 613 Answers

I would just clear the code it is a code saying your transmission is slipping

Posted on Sep 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 chevy blazer trouble code p1870 need to know how to fix it


this code does not appear in the GM code list please contact the code reader manufacturer

Feb 17, 2014 | Cars & Trucks

1 Answer

How to fix p1870 on pontiac sunfire


how to fix p1870 on pontiac sunfire p1870 manuuf. transmision control code

Mar 15, 2013 | 1999 Pontiac Sunfire

1 Answer

I have a code p1870 for an astro 97' how do i fix?


P1870 CHEVROLET Description Transmission is in 4th gear with Torque Converter Clutch (TCC) engaged and the Engine Control Moduel (ECM) has detected excessive slippage when comparing the input shaft speed to the output shaft speed Causes could include fluid problems and damaged clutches.

Read more: http://engine-codes.com/p1870_chevrolet.html#ixzz21kpJ6kDL

Jul 26, 2012 | 1997 Chevrolet Astro

1 Answer

My 2002 gmc wont shift and code p1870 came up it will stay im low gear


You can replace the transmission valve body as per the instruction or install a new TCC apply valve kit. However the installation requires for the valve body to be removed and honed out by a special tool. I wouldn't recommend this procedure unless you have the proper tools and the know how about the inner workings of the automatic transmissions.

#01-07-30-023B: Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body) - (Mar 22, 2002)
Subject: Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body)
Models: 1996 Buick Roadmaster
1996 Cadillac Fleetwood
1999-2000 Cadillac Escalade
1996-2000 Chevrolet Camaro, Corvette
1996-2000 Pontiac Firebird
1996-2000 Chevrolet and GMC Light Duty Truck Models
1996-2000 Oldsmobile Bravada
with 4L60-E Automatic Transmission (RPO M30)
Built Prior to January 15, 2000 (Julian Date 0015)

This bulletin is being revised to update VIN Breakpoint Date information and revise the Parts Information table. Please discard Corporate Bulletin Number 01-07-30-023A (Section 07 -- Transmission/Transaxle).

Condition: Some customers may comment on a harsh 1-2 upshift and the Check Engine Light or Service Engine Soon indicator is illuminated.

Diagnosis: Typically, these vehicles will have been driven more than 32,000 km (20,000 mi) before this condition occurs.

The scan tool may show a DTC P1870 set as a history code.

A harsh 1-2 shift or DTC P1870, caused by wear in the control valve body, may be difficult to duplicate when the transmission temperature is below 93°C (200°F).

Cause: The condition may be due to wear in the control valve body. This wear occurs in the bore that contains the TCC isolator and regulator valves, and results in poor, or no, TCC apply.

Important:
• DTC P1870 is a type B code. The conditions for setting the P1870 DTC must occur on TWO CONSECUTIVE TRIPS (ignition cycles, with a drive cycle) before setting a P1870 history code.
• When the conditions for setting DTC P1870 are met (first trip), the PCM commands maximum line pressure and harsh 1-2 shifts are the result.
• This may result in a harsh 1-2 shift with no history code if the conditions for setting the DTC required for the second trip are not met, on two consecutive trips (Ignition cycles, with a drive cycle).
• When the conditions for setting the DTC are met, on the second consecutive trip, a DTC P1870 is stored as a history code.
• When the P1870 code is stored, the PCM will turn on the Service Engine Soon (SES), Check Engine Light (CEL), or Malfunction Indicator Lamp (MIL).

Correction: Install a control valve body with the revised TCC regulator and isolator valves. Refer to the Parts Information table below. These valves are used in all transmissions produced after January 15, 2000 (Julian Date 0015), and all of the service parts currently available through GMSPO contain revised TCC regulator and isolator valves.

Important: If all of the following conditions are true, it is not necessary to rebuild the transmission or to replace additional transmission components beyond the control valve body.
• Transmission operation is normal before the transmission reaches operating temperature, or before DTC P1870 is set (no slips, flares, or missing gears).
• The torque converter is not blue or overheated.
• The transmission fluid is not burned or has no burned odor.
• The transmission fluid pan contains no abnormal debris (clutch material, bronze, brass, or metal fragments).

Keep us updated.

Oct 06, 2011 | Cars & Trucks

1 Answer

Code p 1870 came up and truck wont shift


You can replace the transmission valve body as per the instruction or install a new TCC apply valve kit. However the installation requires for the valve body to be removed and honed out by a special tool. I wouldn't recommend this procedure unless you have the proper tools and the know how about the inner workings of the automatic transmissions.

#01-07-30-023B: Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body) - (Mar 22, 2002)
Subject: Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body)
Models: 1996 Buick Roadmaster
1996 Cadillac Fleetwood
1999-2000 Cadillac Escalade
1996-2000 Chevrolet Camaro, Corvette
1996-2000 Pontiac Firebird
1996-2000 Chevrolet and GMC Light Duty Truck Models
1996-2000 Oldsmobile Bravada
with 4L60-E Automatic Transmission (RPO M30)
Built Prior to January 15, 2000 (Julian Date 0015)

This bulletin is being revised to update VIN Breakpoint Date information and revise the Parts Information table. Please discard Corporate Bulletin Number 01-07-30-023A (Section 07 -- Transmission/Transaxle).

Condition: Some customers may comment on a harsh 1-2 upshift and the Check Engine Light or Service Engine Soon indicator is illuminated.

Diagnosis: Typically, these vehicles will have been driven more than 32,000 km (20,000 mi) before this condition occurs.

The scan tool may show a DTC P1870 set as a history code.

A harsh 1-2 shift or DTC P1870, caused by wear in the control valve body, may be difficult to duplicate when the transmission temperature is below 93°C (200°F).

Cause: The condition may be due to wear in the control valve body. This wear occurs in the bore that contains the TCC isolator and regulator valves, and results in poor, or no, TCC apply.

Important:
• DTC P1870 is a type B code. The conditions for setting the P1870 DTC must occur on TWO CONSECUTIVE TRIPS (ignition cycles, with a drive cycle) before setting a P1870 history code.
• When the conditions for setting DTC P1870 are met (first trip), the PCM commands maximum line pressure and harsh 1-2 shifts are the result.
• This may result in a harsh 1-2 shift with no history code if the conditions for setting the DTC required for the second trip are not met, on two consecutive trips (Ignition cycles, with a drive cycle).
• When the conditions for setting the DTC are met, on the second consecutive trip, a DTC P1870 is stored as a history code.
• When the P1870 code is stored, the PCM will turn on the Service Engine Soon (SES), Check Engine Light (CEL), or Malfunction Indicator Lamp (MIL).

Correction: Install a control valve body with the revised TCC regulator and isolator valves. Refer to the Parts Information table below. These valves are used in all transmissions produced after January 15, 2000 (Julian Date 0015), and all of the service parts currently available through GMSPO contain revised TCC regulator and isolator valves.

Important: If all of the following conditions are true, it is not necessary to rebuild the transmission or to replace additional transmission components beyond the control valve body.
• Transmission operation is normal before the transmission reaches operating temperature, or before DTC P1870 is set (no slips, flares, or missing gears).
• The torque converter is not blue or overheated.
• The transmission fluid is not burned or has no burned odor.
• The transmission fluid pan contains no abnormal debris (clutch material, bronze, brass, or metal fragments).

Keep us updated.

Oct 06, 2011 | Cars & Trucks

1 Answer

Check engine light on code p1870 what to do light is on steady


I also have a 99 Lumina and code p1870 means: Transmission Component Slipping/ Transmission Mechanical Transfer Case 4x4 Switch Circuit Failure Now we both know theres no 4x4 in these cars. So I'm going to try to find out about this and try to figure out why the PCM showed this code. When I do, I'll put it on my profile.

Aug 15, 2010 | 1999 Chevrolet Lumina

3 Answers

P1870 code what does it mean


This GM service bulliten might apply to your vehicle:

TSB # 01-07-30-023A
Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body)
1996 Buick Roadmaster
1996 Cadillac Fleetwood
1996-2000 S10 Blazer
1999-2000 Cadillac Escalade
1996-2000 Chevrolet Camaro, Corvette
1996-2000 Pontiac Firebird
1996-2000 Chevrolet and GMC Light Duty Truck Models
1996-2000 Oldsmobile Bravada
with 4L60-E Automatic Transmission (RPO M30)
Built Prior to January 15, 1999 (Julian Date 9015)
This bulletin is being revised to update the Parts Information

Please discard Corporate Bulletin Number 01-07-30-023 (Section 07 -- Transmission/Transaxle).
Condition
Some customers may comment on a harsh 1-2 upshift and the Check Engine Light or Service Engine Soon indicator is illuminated.
Diagnosis
Typically, these vehicles will have been driven more than 32,000 km (20,000 mi) before this condition occurs.
The scan tool may show a DTC P1870 set as a history code.
A harsh 1-2 shift or DTC P1870, caused by wear in the control valve body, may be difficult to duplicate when the transmission temperature is below 93°C (200°F).
Cause
The condition may be due to wear in the control valve body. This wear occurs in the bore that contains the TCC isolator and regulator valves, and results in poor, or no, TCC apply

Important
DTC P1870 is a type B code. The conditions for setting the P1870 DTC must occur on TWO CONSECUTIVE TRIPS (ignition cycles, with a drive cycle) before setting a P1870 history code.
When the conditions for setting DTC P1870 are met (first trip), the PCM commands maximum line pressure and harsh 1-2 shifts are the result.
This may result in a harsh 1-2 shift with no history code if the conditions for setting the DTC required for the second trip are not met, on two consecutive trips (Ignition cycles, with a drive cycle).

When the conditions for setting the DTC are met, on the second consecutive trip, a DTC P1870 is stored as a history code.
When the P1870 code is stored, the PCM will turn on the Service Engine Soon (SES), Check Engine Light (CEL), or Malfunction Indicator Lamp (MIL).
Correction
Install a control valve body with the revised TCC regulator and isolator valves. These valves are used in all transmissions produced after January 15, 1999 (Julian Date 9015), and all of the service parts currently available through GMSPO contain revised TCC regulator and isolator valves.

Important
If all of the following conditions are true, it is not necessary to rebuild the transmission or to replace additional transmission components beyond the control valve body.

Transmission operation is normal before the transmission reaches operating temperature, or before DTC P1870 is set (no slips, flares, or missing gears).
The torque converter is not blue or overheated.
The transmission fluid is not burned or has no burned odor.
The transmission fluid pan contains no abnormal debris (clutch material, bronze, brass, or metal fragments

Jun 18, 2010 | 1998 GMC Jimmy

1 Answer

My car runs perfect but it has code p1870. oil trans looks a little light brown, i dont have any problem with the trans, it works very smooth. why check engine light it says code p1870????? can a dirty oil...


yes, when you burn your transmission fluid, its just like when you burn your motor oil. Lower vescosity means more friction. more friction, more heat, more heat messes with your sensors inside the trans causing them to send a code to the ecm. do a filter change and transmission flush. clear the code and retest.

May 05, 2010 | 1997 Buick LeSabre

1 Answer

The check engine light is on on my car i put in the computer a said the code p1870 but i don't know whats that mean


P1870 is a code for a transmission component slipping. It would be very difficult to diagnose yourself. I suggest bringing it to a transmission shop.

Apr 16, 2009 | Oldsmobile 88 Cars & Trucks

1 Answer

Transmission


I recently ran into this same problem. My truck has 125,000 miles. The service engine light would come on from time to time. I did as you and got a P1870 code.

P1870
The transmission is in 4th gear with the TCC (torque converter clutch) engaged and the ECM has detected excessive slippage when comparing the input shaft speed to the output shaft speed.

Probable causes
  1. Towing a trailer.
  2. Transmission fluid level.
  3. Internal transmission failure.
In my particular case a fluid and filter change solved the problem. I do plan on dropping by the trans shop and let them do a complete service in the near future. (Fluid, filter, band adjust, and check pressure)

Good Luck.
Bob

Jun 06, 2008 | 2000 GMC Sonoma Extended Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...