Question about 2006 Ford F-250 Super Duty

1 Answer

Where is the high pressure oil pump located in 06 f250 super duty

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Your engine must be a powerstorke. the high pressure oil pump must be in the middle of it

Posted on Sep 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the IPR located on a 2001 f250 super duty 7.3


the IPR is located in rear, top, center of the engine in the High pressure oil pump. It can be identified by its gold color. It sticks out of the side of the pump pointing toward the driver side of the truck. It has a 2 wire plug that is held on by a metal clip.

Jan 23, 2011 | 2008 Ford F-250 Super Duty

1 Answer

2004 f250 super duty how to replace high pressure oil pump.


I have a 2004 ford 250 super duty.My problem is my truck has no torgue.It has a problem when I take off. ( 2 ) When going up hill with the 5th. wheel, after a period of time, I hear a screaching sound in the turbo. Parts were replaced in the turbo & 2 new fuel injectors. Still have the same problem. Can you help me?"

(rayjoan@bonneautransport.com)

Sep 20, 2010 | Ford F-250 Super Duty Cars & Trucks

2 Answers

I have a 2002 Ford F-250 Diesel 7.3 litre Super Duty truck. It is leaking oil from an area beneath the fuel filter. What part would I need to repair this leak?


there are 2 high pressure lines that attach to the high pressure pump near the front of the engine left side. the o rings leak. I would get them from the dealer, or a shop that does a lot of Diesel work. Its not a easy job.

Aug 31, 2010 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Where is the high pressure oil line on the head located on a 2000 Ford F-250 7.3L Diesel. And is it hard to reapir? Bad oil leak.Thank you. Rev.Michael


Most oil leaks on this engine occur in the valley of the engine at the back of the oil pump. If you look directly down into the center of the engine infront of the turbo you will see the back of the pump and the potential leaks at the plugs on the pump and the output lines to the heads.

Mar 18, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

High pressure oil pump leak.


the high pressure pump provides the pressure to your injectors so the diesel luel can be injected at high pressure. You should fix this immediately. Call your dealer and ask for some help from Ford on the repair cost ahead of the repair. See what they will do.

May 27, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

2006 ford f250 diesel hard to start


The High pressure oil pump is going out.. This is the oil pump that operates your injectors .. when the oil gets hot this oil pump puts out less pressure and will not let the injectors operate right . when the oil is cold in the morning it will have more oil pressure because of the oil stiffness. later after ran a while and it gets warm it wont operate your injectors.. you can also change the oil to a heavier oil but this will only temp fix it.. .. good luck and this is what is wrong with it .. not sure what these cost but they are located at the rear of the engine on top .. on the 6.0 if i remember right not inside the engine.

May 14, 2009 | 2006 Ford F-250 Super Duty

1 Answer

1999 F 250 crank but wont start


look on injector pump make sure there are no loose wires

Dec 09, 2008 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

WHERE IS THE IPR LOCATED ON THE ENGINE ?


The "IPR" is and Injector Pressure Regulator. It is a Solenoid used to control the oil pressure created by the High Pressure Oil Pump. The IPR is capable of regulating oil pressure from 0 to 5000 psi. On an 05 6.0l the IPR is located in rear, top, center of the engine in the High pressure oil pump. It can be identified by its gold color. It sticks out of the side of the pump pointing toward the driver side of the truck. It has a 2 wire plug that is held on by a metal clip. usually the ipr and plug are protected in a heat shield so you may not be able to see it right away. Some people mistake and IPR for and ICP. The ICP is a sensor that tells the PCM what the High oil pressure is. ICP stands for Injector Control Pressure. This sensor is located in the passenger side valve cover on and 04, 05 6.0l and in the top of the High pressure oil pump on an 03 6.0l.

Nov 06, 2008 | 2006 Ford F-250 Super Duty

4 Answers

2000 ford f250 super duty 4x4 7.3L diesel oil leak


The HPOP (high pressure oil pump) is right under the filter housing. There are 2 lines that distribute the oil to the cylinder heads. The o-rings on those fittings go out. Kit is available from Ford or International. You will need a special wrench to get to the fittings though.

Jun 06, 2008 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
2006 Ford F-250 Super Duty Logo

Related Topics:

692 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...