Question about Chevrolet Blazer

Open Question

Oil pressure relief valve location, 4.3l vortec with remote mount oil filter

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Mikey108
  • 475 Answers

SOURCE: OIL PRESSURE RELIEF VALVE

If cleaning the engine does not work, replace the oil press. sending unit. These senders on Jeeps have had a history of problems where they will work one day and not the next day.

Posted on Jan 27, 2009

Ad
farroutideas
  • 78 Answers

SOURCE: oil pressure sending unit

Hi there;

Your looking foer the oil pressure sensor on the 2004 8.1L.
You will find it located directly behind the EGR valve threaded into the block just to the drivers side of the center bolt for the transmission to block connection.

Thanks
Farrout!

Posted on Mar 17, 2009

  • 1986 Answers

SOURCE: Where is the oil pressure sensor located on a 2003

It is on the top backside of the engine block, behind the intake manifold mounted into the top of the block. You will have to lean up over the engine to see it.

Posted on Oct 30, 2009

Testimonial: "Thanks for the help"

thark01
  • 114 Answers

SOURCE: where is the oil pressure sending unit located on

Its in the rear/ top /center. Hidden alittle, you can get it out with a special socket and it's not hard to access.

Posted on Jan 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does a oil pressure relief valve do


For any engine with an oil pump, the components inside it are designed and engineered to operate at a certain range of oil pressures.
For example, an automobile engine might be designed to operate at # 30 to # 70 pounds of pressure.
If you subjected the bearings to double the pressure, you could achieve bearing failure, as you could with not enough pressure.
The oil pressure relief valve will "open" when the upper limit of pressure is reached and allow the extra pressure and oil to go straight back to the crankcase.

Jul 10, 2017 | Cars & Trucks

1 Answer

Can anybody pls help me with a oil pressure release valve I tried every place and does it come in a kit


What is an oil pressure release valve? Never heard of one. Do you mean oil pressure relief valve? Depending on car, some are inside oil pump, some are in oil filter adapter. Try calling it a relief valve and see if parts store can now help.

Jun 09, 2015 | Cars & Trucks

1 Answer

Have 1986 Chevy K-30 with a 454. Oil pressure is running about 70lbs. Is that to high&could it be the oil pressure relief valve&where is said valve. Thanks


I don't believe there is a oil pressure relief valve, but there is a pressure bypass located in the neck of the oi filter mount. I would check to make sure that you have the correct oil filter on the motor.

Mar 03, 2015 | Cars & Trucks

1 Answer

Does the 6.6 duramax diesel engine have a pressure relief valve that regulates the oil pressure?


it should have. It will be either part of the oil pump or a relief valve screwed into the oil galley or oil filter housing above the filter body.

Dec 01, 2014 | Cars & Trucks

1 Answer

1500cc engine


Hi I'm Peter, Check your oil pressure some pumps as they start to go out the oil pressure will fluctuate. I would also check the oil filter housing and or pump for a pressure relief valve. if the oil filter becomes clogged there is usually a relief valve in the oil filter housing where it mounts to the engine then into the pump that if the filter collapses or becomes clogged it will open. Sometimes the spring behind the steel ball will weaken or break causing the ball to chatter back and forth. You can use a mechanics stethoscope to narrow it down further if you need. If it is your oil pump going out you will need to do something soon or you will have an engine rebuild on your hands.

Apr 15, 2014 | 1993 Mitsubishi Lancer

1 Answer

High oil pressure in a 1988 vs scirocco


its in the filter housing(by pass valve) and make sure that you fit an origional filter

Mar 14, 2013 | 1988 Volkswagen Scirocco

2 Answers

Renault kangoo


No that is not possible.

Apr 27, 2012 | Cars & Trucks

1 Answer

1990 triton oil pressure relief valve location


Hi Lee, There are two oil pressure relief valves on most vehicles. One is fitted onto the oil pump assembly and another onto the oil filter housing assembly. The oil pump pressure relief valve is located at the front of the engine and is accessed via a blind nut on the side of the unit. The bolt is in the form of a cap, which when removed can be seen to be holding down under tension a spring, which in turn presses the valve. If the pressure becomes too high the valve body is pushed upwards and releases an amount of oil, thereby maintaining the required pressure. The valve built into the oil filter housing works in much the same way, but its job is to allow oil circulation in the event of a blocked oil filter. regards John

Feb 11, 2012 | Cars & Trucks

1 Answer

2000 Safarri 4.3 vortec, why is the oil pressure pegged


you may have a problem with the oil pressure relief valve

Apr 09, 2010 | 2000 GMC Sierra

1 Answer

Location of Oil Pressure Sensor and Oil Pressure Relieve Valve


the oil pressure switch is on pssenger side, lower engine area,beside oil filter, mounted in engine block. The pressure relief valve is in the oil pump, in which case, you have to drop the oil pan,and take off the oil pump.

Jan 31, 2009 | 1989 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...