Question about Chevrolet Silverado 1500

Open Question

Remove door panels off of a 1994 chevy silverado to replace the mirrors

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 68 Answers

SOURCE: need to install power mirror - driver side 1994 toyota camry xle

take the screws out, pop off the panel, disconnect the wire connectors, make sure you dont lose the screws.

to put the panel back on: reconnect the wire connectors, put panel back on track, pop panel on (hit the corners), put the screws in and tighten them.

Posted on Nov 18, 2008

Ad
csmock132
  • 4669 Answers

SOURCE: remove door panel

Remove the screws and lift up. There aren't any screws behind the window switch, it is screwed on from behind. There is a hidden screw behind the lock slider.

Posted on Mar 01, 2009

  • 9 Answers

SOURCE: change drivers side door panel on 94 chevy p.u.

unscrew the inside handle and pop of the window arm....then slowly work your way around the panel poping loose the plastic rivits on the inside edge...lift panel upwards to unhang it from window lip...thats the plastic panel...the metal panel inside that is pretty self explanitory..unscrew and take off the clips holding the controle arms to it and remove...do use caution as parts are very sharp and will slice your fingers and hands.

Posted on Feb 01, 2009

SOURCE: how do you remove the door panel?

All GM's cars and trucks are relatively the same. U just need a few tools to remove the panels without damage. one is a tool called a button popper.
1. there will be a screw inside where the door handle is. u need to remove this .
2 starting from the top left go around the outside the panel to see if there and screws holding the panel on.
3. starting with the bottom left insert the tool and lift up on the panel. u should here a pop when u lifted it enough. next goto to the bottom right. and do the same thing.
4. grab both bottom pats and gently outwards.. if its not popping as u are pulling the panel dont force it to do it. check to make sure there are no other screws hidden anywhere. (inside little plastic covers. the center area) repeat the procedure
5. when the panel is loose, pull out slightly and push upwards. this will separate the panel from the door and glass.
u can then see where the electrical connections are and complete the part u are doing.

Posted on Apr 21, 2009

  • 316 Answers

SOURCE: How do I remove the front door panel to replace the mirror

Normal 0 Disconnect your negative battery cable. Locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Remove the interior door handles, then disconnect the wire clips to the switches. Your panel is held in place by snap in clips; use a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are pulled, pull the panel upward to remove it from the door.
Install in reverse.

If you don't have power windows you will have to remove the manual window crank. It is held in place by a clip on the back side of the base. To remove the clip, you will need a small hook (kind of like a knitting needle). Put the hook in behind the base, and grab the clip and pull it off. To replace it, slide the clip back on the window crank, and snap it back on the door.

Posted on May 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a passenger side outside mirror on a 2004 Chevy Silverado, 5.3L, non-heated mirror?


Hello, my name is Ben. This is a very easy repair for any do it your-selfer. There is a plastic triangle shaped piece on the inside of the door at the top of the door panel. Carefully pry it straight our using a small screwdriver or putty knife. Now you can just unbolt the old mirror and bolt in the new one. I hope this helps you with your repair.

Jun 05, 2010 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

1994 chevy silverado driver side mirror is loose


try removing the black cover that wraps out from the door to the mirror just be carefull.....plastic ****.

Apr 25, 2010 | Chevrolet Silverado Cars & Trucks

1 Answer

How to replace a drivers door power mirror on a 1998 Cheverlet


I hope that this link can help to solve your problem:
Drivers Mirror Tech Support

Good luck (remember rated and comment this).

Mar 23, 2010 | 1998 Chevrolet K1500

1 Answer

How do you fix a side mirror on a 2001 Chevy Silverado. The mirror housing just flops around and the ''break away'' part seems to be broken.


These are kind of a pain but do-able with a 1/4" drive socket set
Remove the interior trim piece that covers the area Not the whole door panel - it will pop off with a flat blade screw driver
Remove the black foam insert
Now you can see the 3 nuts that hold the mirror to the door
Careful if you drop them you will say bad words
reinstall the same way - Slow and careful

Mar 08, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

How do I replace a side mirror chevy corsica?


Please don't forget to rate....thanks:


Removal & Installation The door outside mirrors are stud mounted to the door filler. The mirror glass face may be replaced by placing a piece of tape over the glass then breaking the mirror face. Adhesive back mirror faces are available. Left side flat and right side convex mirror faces must be replaced with the same type mirror face when surfaced.
  1. Remove the door trim panel.
  2. Remove the upper trim panel.
  3. Remove the sound absorber.
  4. Remove the (3) nuts.
  5. Remove the control cable from the upper trim panel.
  6. Remove the filler and mirror.
To install:
  1. Place the filler over the studs on the mirror.
  2. Install the control cable through the filler and connect to the upper trim panel.
  3. Install the (3) retaining nuts and tighten to 42-72 inch lbs. (4.7-8.1 Nm).
  4. Install the sound absorber, upper trim panel and trim panel.

Mar 06, 2010 | 1996 Chevrolet Corsica

1 Answer

What is the procedure for replacing the outside mirrors on a 2005 chevy silverado 2500 hd?


if its a power mirror you have to remove the door panel and the upper plastic cover which looks like a triangle the bolts that hold the mirror on are behind that and the wires run behind the door panel

Sep 02, 2009 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

I need to replace the Passenger rear view mirror on a 2002 Chevy


Use a long flat head screw driver with electrical tape wrapped around it(to prevent scratches). Have some one help you and hold a light so you can see the snaps on the inside, be really nice about it and pry the panel from the door frame.

Aug 21, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

How do i fix loose drive side side mirror on a 1990 Chevy silverado 1500?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jun 29, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Replacing driver's side mirror on a 1994 Chevy Lumina sedan


There are screws that hold the door panel on. They are typically located behind the small round plastic covers. If you look at the bottom of the door handle, you will see them. Also on the door lever, there might be a screw. After removing all of the screws, take a flat head screw driver, and gently pry up the panel. There are plastic clips that hold the panel securely to the door. Doing this will pop them out one at a time. Once the door panel is loose, lift it up, and it should come right out. Be sure to disconnect any wiring harness connectors before fully removing.

Mar 24, 2009 | 1991 Chevrolet Lumina

1 Answer

Change drivers side door panel on 94 chevy p.u.


unscrew the inside handle and pop of the window arm....then slowly work your way around the panel poping loose the plastic rivits on the inside edge...lift panel upwards to unhang it from window lip...thats the plastic panel...the metal panel inside that is pretty self explanitory..unscrew and take off the clips holding the controle arms to it and remove...do use caution as parts are very sharp and will slice your fingers and hands.

Jan 21, 2009 | 1994 Chevrolet Silverado 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...