Question about 2003 Saturn ION

Open Question

How do i align timing marks on 03 saturn ion - 2003 Saturn ION

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 158 Answers

SOURCE: I think my '03 Saturn Ion lost power steering

it is more than likley the power steer pump not pumping or the belt is broken

Posted on Mar 25, 2009

  • 73 Answers

SOURCE: starting problem for 03 saturn ion when engine is warm

replace the ign switch. the key has nothing to do with it.

Posted on Apr 08, 2009

  • 186 Answers

SOURCE: changed timing chain and need to align to cam with the crang

Align the chain with the colored links on the chain over the marks on the cams.Twin cams Have a small hole on the cam gears that will align with a hole in the front of head.Crank Gear has a pip mark that goes straight up.colored links on crank go to the 5 & 7 Oclock position on the lower crank gear with pip mark on crank gear at 12:00.Hope this helps

Posted on May 22, 2009

  • 543 Answers

SOURCE: how to replace the heater bkower motor

on the passenger side of the car under the dash there sits the hvac box they a 1 connector to it and 3 screws little ones,remove then and it falls out,,install new,,,easy

Posted on Feb 22, 2010

michigan man
  • 3533 Answers

SOURCE: replace serpentine belt on 03 Saturn ion ?

for the most part there is a tensioer holding the belt on give these websites a try www.alldatadiy.com and www.autozone.com wish you the best of luck Michigan Man.

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 Saturn vue 160 lb compression on 1/3/5 no compression on 2/4/6 timing marks are lined up.


You have 2/4/6 timing marks 180 degress out on exhaust or intake cam .

Did your special tool ?
Rotate the crankshaft using the J 42098 until the #1 cylinder is at 60 degrees before top dead center (BTDC).
Install theJ 42069 Crankshaft Locking Tool.
Rotate the crankshaft in the engine rotational direction (clockwise) using the J 42098 until the #1 cylinder is at top dead center (TDC) and tighten the lever arm to the water pump pulley flange.
Important: Ensure that the alignment of the crankshaft is not 180 degrees off. The alignment mark must align with the corresponding notches on the rear timing belt cover.
Install the 1-2 and 3-4 camshaft locks, the J42069-1 Timing Belt Alignment Kit and the J42069-2.
Important: Do not rotate the crankshaft if the camshafts are not locked in place with the 1-2 and 3-4 camshaft locks (J42069-1 and J42069-2).
Important: Do not rotate the camshafts unless the crankshaft is at 60 degrees BTDC or the valves may contact the crankshaft.
Loosen the tensioner pulley.
Remove the timing belt.

Jan 09, 2017 | Saturn Vue Cars & Trucks

1 Answer

Lining up timeing chain marks. 2 gold and one black


Hello jaws2614,

The timing marks align Like this:

First, rotata the crankshaft until the timing mark is at the 5 o'clock position.

Then the black link is placed over the diamond marked "INT"on the intake camshaft It should be at the 2 o'clock position.

Then working down to the crankshaft the gold link aligns with the crankshaft timing mark.

Then to the exhaust camshaft the other gold link aligns to the triangle marked "EXH" at the 10 o'clock position.

I've included some pictures below, Good luck.

netvan_29.png
netvan_30.png
netvan_31.png
Regards,
netvan

Mar 23, 2011 | 2003 Saturn ION

1 Answer

I have a 03 saturn ion and the raditor coolent keep going down what should I do


look for loose clamps on hoses ,make sure that the resoiver cap is on the lid look for any pin holes on radiator and hoses

Mar 17, 2011 | 2003 Saturn ION

1 Answer

Need timing info on a 05/06 saturn ion? 2.0 l sprchrged eng



  • Tighten
    Tighten the timing belt tensioner fastening nut to 20 N·m (15 lb ft).
  • Verify the timing marks are still aligned.
  • Remove the J42069-10 and J42069-20.
  • Install the timing belt front cover. Refer to Timing Belt Cover Replacement-Front.
  • Connect the negative battery cable.Tighten
    Tighten the battery terminal bolts to 17 N·m (13 lb ft)

  • click on this link directly to get detailed instructions on how to set timing on Saturn Ion Car http://whoisbyme.blogspot.com/2010/03/saturn-ion-cars-trucks-timing-belt-20-l.html ------------ This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

    Mar 25, 2010 | Saturn Ion Cars & Trucks

    1 Answer

    Replace serpentine belt on 03 Saturn ion ? how do i release tensioner and where is it located


    for the most part there is a tensioer holding the belt on give these websites a try www.alldatadiy.com and www.autozone.com wish you the best of luck Michigan Man.

    Mar 08, 2010 | 2003 Saturn ION

    1 Answer

    03ion fan only blows on low when turn on reguardless of setting


    You have either a bad resistor pack or a bad switch. Replacement is the only solution for each.

    Sep 14, 2009 | 2003 Saturn ION

    2 Answers

    I need the tire size and # of bolt holes for a


    Standard size from the factory is 185/70R14 tires and wheel has a 5 lug hole pattern.

    There was an optional tire size of 195/60R15 tires that came with the special appearance package

    Sep 09, 2009 | 2003 Saturn ION

    1 Answer

    Changed timing chain and need to align to cam with the crang


    Align the chain with the colored links on the chain over the marks on the cams.Twin cams Have a small hole on the cam gears that will align with a hole in the front of head.Crank Gear has a pip mark that goes straight up.colored links on crank go to the 5 & 7 Oclock position on the lower crank gear with pip mark on crank gear at 12:00.Hope this helps

    May 22, 2009 | 1995 Saturn Sl

    1 Answer

    I think my '03 Saturn Ion lost power steering


    it is more than likley the power steer pump not pumping or the belt is broken

    Mar 25, 2009 | 2003 Saturn ION

    1 Answer

    Starting problem for 03 saturn ion when engine is warm


    replace the ign switch. the key has nothing to do with it.

    Mar 16, 2009 | 2003 Saturn ION

    Not finding what you are looking for?
    2003 Saturn ION Logo

    Related Topics:

    265 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saturn Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8152 Answers

    Are you a Saturn Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...