Question about 1998 Toyota Corolla

1 Answer

Replacing serpintien belt for toyota carolla - 1998 Toyota Corolla

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 46 Answers

P, li { white-space: pre-wrap; }

Look at the belt routing (the way the belt runs around all of the pulleys). If you do not find a belt routing diagram under the hood, you'll want to make your own sketch


Find the belt tensioner pulley, usually located just above the crankshaft.


Insert your 19mm ratchet or breaker bar tool into the tensioner bolt head and pull toward the front of the vehicle to release tension on the belt.


Slip the old belt off of the pulleys.


Reference your belt routing diagram to get the new belt seated on all pulleys. Make sure any grooves on the belt rest against grooved pulleys, and that smooth belt surfaces contact smooth pulleys.


Slowly release the tensioner and check for correct belt tension.


Run the engine and observe for flapping or noise, signs of incorrect installation.


Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 ford ranger 2.3 liter


tack it you checked the timing marks had all lined up. and your fuel pump timing is correct.

Dec 21, 2013 | Cars & Trucks

1 Answer

94 toyota carolla won't start after it rains?


This is usually a cracked distributor or bad plug wires water is getting into the system. if you get the car running try looking at the wires and dist. in the dark if you see any sparks replace the parts you see the sparks coming from,

Dec 26, 2012 | Cars & Trucks

1 Answer

1997 toyota carolla at 112,000KM what are the additional maintenance requirements, ie timing belt, water pump, spark plugs, etc I have a generic maintenance log which does not provide specifics,...


Timing belt inspection is in order, and if the timing belt is replaced, then the water pump should be replaced also. I have inspected timing belts on many engines that have over 150,000 miles on them and found the timing belt was perfect. It is hard to say why some vehicles wear out a belt moe than others, but replacing the belt is good insurance. As for the plugs, I would just replace them. They will wear out sooner than any timing belt.

Dec 12, 2010 | 1997 Toyota Corolla

1 Answer

Can my 91 toyota carolla leak oil if the bolts on the timing belt cover are all missing.


Thats a very good question, a timing belt is a dry belt. What that means is no oil should be in the general area. You have a couple of seals your camshaft oil seal and your crankshaft front oil seal. As long as both of those are not leaking then you will not leak oil in that general area.

Aug 05, 2010 | 1991 Toyota Corolla

1 Answer

Need a serpentine belt diagram for 2004 Toyota


Sorry for the delayed response.
CLICK
on the following LINK. It has the Serpentine Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/2004/make/toyota/model/corolla/2004_toyota_corolla_drive_belt_routing_diagram.htm

Feb 20, 2010 | 2004 Toyota Corolla

2 Answers

Serpentine belt blew due to belt wheel sheering off


with the belt off,try to spin each and every pulley,and water pump,alternator,idler pulley,automatic belt tensioner pulley,sounds like one froze up and took the belt out.

Dec 10, 2009 | 2004 Toyota Corolla

1 Answer

Air conditioning unit seized up and burt the belt.


Yoe will have to replace whatever seized up, if you want AC, If not, just unplug the wires into the unit. That will disable the clutch and the pulley will spin freely. You also need to replace the serpentine belt.

Sep 03, 2009 | 1995 Chevrolet Caprice Classic

1 Answer

Need the torque settings for a toyota carolla


1st stage 25Nm or 18.5Ft-Lb. 2nd stage 50Nm or 37Ft-Lb. 3rd stage 65Nm or 48 Ft-Lb Torqueing sequence: <-- Front 8 6 1 3 9 10 4 2 5 7

Jun 13, 2009 | 1983 Toyota Corolla Deluxe

1 Answer

Power steering not working


check power steering belt may be broken then get back to me. Good
luck

Jan 02, 2009 | 2002 Chrysler PT Cruiser

Not finding what you are looking for?
1998 Toyota Corolla Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...