Question about 2000 Chevrolet Impala

Open Question

The dic on a 2000 impala stop working how can i fix?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why does 2000 impala turn signals stop working?

I am told it is a relay in emergency flasher circuit.

The quick fix is to activate emergency flashers just for a few cylcles , a minute or two after car has been running. The directionals will work fine for the duration of that ride.

I have heard of peolple remvoving trim to get at switch, cleaning contacts and components of switch, but symptom eventually re-appeared. Cycling through e-flashers a few times works every time for me. - Rick Rock

Sep 01, 2014 | 2000 Chevrolet Impala

1 Answer

2008 impala windshield washer dic reset

You have a bad sensor. It's on the washer reservoir. This is a 2003 pic, But gives you an idea where to look. The sensor is the one on the right.0b881713-956c-40a5-a1eb-b595b40be6e8.gif

May 15, 2014 | 2008 Chevrolet Impala SS

1 Answer

Cant locate the fuse for my keyless entry in my 2005 chevrolet impala

The remote control door lock receiver gets power from the 10A DIC/RKE fuse in the right instrument panel junction block (IPJB). Serial data output is applied to the body control module so if you continue to have a problem, go to the left IPJB and check the 10A CLSTR/BCM fuse, the 10A PCM/BCM/CLSTR fuse, the 20A DR LK fuse, the 15A LH HTD ST/BCM fuse, the 10A STOP fuse, and the 10A BCM fuse.

Oct 01, 2012 | 2005 Chevrolet Impala

1 Answer

2000 Impala, the Dash lights have stopped working, there was a buzzing before the lights went out.

you may try checking the fuse panel first its always good to start with the cheapest fixes first then use an elimination process if that doesnt fix it. but most likely it is just a fuse

Oct 17, 2009 | 2000 Chevrolet Impala

1 Answer

2006 Chevy Impala - Can't Clear Replace Battery in Remote Alarm

There is a fault code present and you will have to take it to a dealership for them to use a Tech II and read the code.

Jun 20, 2009 | 2006 Chevrolet Impala

3 Answers

Drivers Information Center in a 2005 Chevy Impala

Turn the key to the on position (not start) with the radio off. Wait 10 seconds. Press the "display" button on the radio and hold for 10 to 12 seconds. the radio display will light up . Press "display" and "1" to select functions.

This was not tested or confirmed by me, but my dad has a 2005 Impala and this is what he told me. Let me know if it works or not, and I can try to investigate it more if needed.

May 14, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2000 Chevrolet Impala Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides