Question about 1985 Ford Econoline

1 Answer

What thay do is scrape the water off the window {'' cat wiskers''} where could I purchess the right & left ? and a parts manual that lists ALL the parts of a cutaway van for a Tioga motorhome thank you David.

Posted by on

  • fuzzy4christ Sep 23, 2010

    as you roll down the window this part rubs or scraps the water off the window on the outside
    {between the window and steel door} it is made of a type of plastic on newer cars it is rubber.

  • fuzzy4christ Sep 25, 2010

    the original chassis doors


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Ford Master
  • 22,156 Answers

Not sure what you mean by cats whiskers ,unless you mean the wiper blades --??-- now as for a parts catalogue then for this you will have to find the location of the manufacturer of the motorhome body ,look on the coachwork and you should find a plate with their details on and go from their ,this is about the best advice i can give as their are so many coachbuilders all over the world .Still cant understand your cats whiskers though this is a new one on me because to me a cats whisker is what we called the wire that you tweeked on a radio as a kid which we made from a crystal and some wire for an aerial

Posted on Sep 12, 2010

  • Colin Stickland
    Colin Stickland Sep 25, 2010

    yes now i understand ,but is it the original vehicle chassis doors or doors made by the motor home builders

  • Colin Stickland
    Colin Stickland Sep 26, 2010

    then try the auto factor first as they will have some universal rubber that you cut to length ,failing which the dealer


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

O2 sensor bank 1 sensor 2 location 307 1.4 2004

Notes in relation to bank numbers
•Bank 1 always refers to the group of cylinders which includes No.1 cylinder.
•The majority of small engine European vehicles will only have Bank 1 sensors fitted (i.e. 1 x Front & 1 x Rear).
•An inline 6-cylinder engine may have cylinders 1, 2 & 3 referred to as Bank 1 & cylinders 4,5 & 6 referred to as Bank 2.
•V configured engines would normally have Bank 1 & Bank 2 sensors, with again Bank 1 referring to the group of cylinders which contains No. 1 cylinder.
Notes in relation to sensor numbers
•Sensor 1 always refers to the front / regulating (Upstream / Pre-cat / Upper) sensor.
•Sensor 2 always refers to the rear / diagnostic (Downstream / Post-cat / Lower) sensor.
N.B. Some larger capacity vehicles may have 2 rear / diagnostic (Downstream / Post-cat / Lower) sensors on the same bank, which may be referred to by EOBD codes as sensor 2 & sensor 3. Sensor 2 would relate to the rear sensor closest to, or in the catalyst, with sensor 3 relating to the rear sensor furthest from the catalyst.
Notes in relation to position
In some catalogue entries, a sensor will be listed as fitting in left or right position. This is always taken from the point of view of sitting in the vehicle (i.e. For UK RHD vehicles Right = Offside, Left = Nearside).
Correct identification of the relevant oxygen sensor is more important than ever as many vehicles now may have devices such as temperature, pressure and NOx sensors fitted to the exhaust system in addition to the oxygen sensors.

Sep 29, 2016 | Cars & Trucks

1 Answer

How to change BANK 1 & 2 o2 sensors 1 & 2 on 1996 chevy silverado


Jan 20, 2015 | Cars & Trucks

1 Answer

2002 Ford Escape XLS 3.0L 4WD Firewall side Catalytic gets TOO HOT and melts insides?

Replace all of the ignition coils. You will pay about $450 in parts. That will fix your problem. It fixed mine.

Jan 20, 2013 | 2002 Ford Escape

1 Answer

Need to purchess computer for 2001 nissan maxima

The part is listed as the "ECM" (electronic control module) you can purchase a rebuilt one here. They have the best prices I could find.

Jan 25, 2012 | 2001 Nissan Maxima

1 Answer

Where is the fuse for the electric window ?

Step one is to check the 30 amp window/sunroof fuse in the underhood fuse box.

Do the windows not work from any of the switches?
Does the dome lamp work?
Does the sunroof work if you have one?
Have you tried swapping the window relay with another one of the same part number? The relays should be labeled on the fuse box covers as to which ones thay are. The relay should be in the right side fuse block in the car.

Sep 03, 2010 | 2000 Saturn SL

1 Answer

Which side is bank 1 in dodge durango 2000 4.7 the driver side or passenger side

I assume bank 1 is the o2 sensors before the cat & bank 2 is after the cat. The various auto parts stores
are giving me conflicting info as one store says bank 1 is the left cat and bank 2 is the right cat.

Jun 10, 2010 | 2000 Dodge Durango

2 Answers

Electrical problem 2000 Buick Park Avenue 6

Sounds like an open ground. Maybe make sure the wire that is on the neg terminal is connected to the body about 6 inches away. Also a mechanic is responsible for his work for 30days. Every mechanic all over the world operates under this law. It is a law

Apr 20, 2010 | 2000 Buick Park Avenue

1 Answer

Where is the front oxygen sensor located on a 2003 chevy avalanche 1500 5.3l

There are 4 oxy. sensors listed for your truck. they're located as follows
Left exaust before catalytic converter. bank1 sensor1-after cat conv.
bank1 sensor2. right exaust before cat.conv. bank2 sensor1-after cat.
conv. bank2 sensor2. Hope this helps.

Mar 31, 2010 | 2003 Chevrolet Avalanche

1 Answer

I have a 1996 lexus 400 LS. My check engine light came on .thay said it my p 0420. can you help me.

P0420 is "catalyst system below efficiency". It means that the car thinks a catalytic converter is bad. It could be that the cat is failing, but it also may be that the secondary oxygen sensor (behind the cat, used as a comparator to determine the health of the cat) is failing. As that part is about 10% of the cost of a new catalyst, I'd replace it first, have the code cleared, and see if it comes back.

Dec 09, 2009 | 1996 Lexus LS 400

1 Answer

Trying to install a serpentine belt after replacing water pump and can't get the right route

Here's a link to a web site and page for your year dodge. Just scroll down to your engine and on the left side under PART NUMBER list look for Belt Routing Diagram. If it's not listed under your engine it should be under one of the others.
Hope this helps.

Sep 12, 2009 | 2004 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides