Question about 1991 Toyota Pickup

1 Answer

My toyota pick up 22r 4 cylinder 1991 lose some prestone, it is not leaking anywhere under and i change the head caskets 2010, it is not smoking, is it the crack in the motor or , i would very appreciate a solution for the problem thank you in advance.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 707 Answers

I would try retorqueing the heads again in the x patteron first and then check the heater core which would make the carpet wet on the passenger side under the dash....Hope this helps.

Posted on Sep 12, 2010

Testimonial: "thank you very much for your help, i will try your suggestion."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i start my 84 toyota truck 22r i notice white smoke coming out of the exhaust...


If your not overheating or losing coolant, its more than likely engine oil burning. If it is coolant related, possible blown head gasket.

Feb 26, 2014 | 1984 Toyota Pickup Deluxe

1 Answer

WHAT IS THE TORQUE ON THE HEAD FOR 94 TOYOTA PICK UP ITS A 4 CYL 2.4 22R


Here's the manual's engine section for the 22RE:

http://www.ncttora.com/fsm/1993/engine.html

see: cylinder head & specifications

Jul 04, 2011 | 1994 Toyota Pickup

1 Answer

Water in oil, 1991 toyota 22r


Water in the oil is caused by a warped cylinder head. When an engine overheats it causes expansion of the metal and stretches the bolts on the cylinder head. Water enters the oil by gaps in the gasket. You can try to fix it with some radiator sealer but if that doesn't help you have to remove the head. The shop will determine if it is salvageable and can give an estimate for repairs.

Mar 18, 2011 | Toyota Tacoma Cars & Trucks

1 Answer

Water leak, trying to figure out if it is head or intake manifold casket. There is a flat ridge under the intake manifold and it has antifreeze on it and it is above the head casket, I was thinking this...


Without checking the head with a pressure test anything is possible. do a compression check on the cylinders and see if you have high compression on a cylinder. If the head is cracked it will let water into the cylinder and cause high pressure. This is still true with a broken intake manifold gasket as well though depending where it is broken. It is possible that what you are seeing is blow back from the radiator over flow. You don't see any leaks when your stationary but if you drive it and then stop and check it you see the fluid. This could be a result of blow back from a loose radiator cap or bad over flow hose.

Jul 22, 2010 | 2000 Pontiac Firebird

1 Answer

White smoke cuming out tailpipe 3400 v6


I would almost bet you have a blown head gasket or a cracked head. White smoke at the exhaust, loosing coolant, moisture on the underside of the oil fill cap, and on the dip stick are all signs of a blown gasket. The fact that there is no coolant in the oil does not mean it does not have a blown gasket. To find out for sure remove all spark plugs, disconnect the coil wire, and then run a compression test on all cylinders. If you find one or more with low compression you have a blown gasket. Do not drive this car any longer until you get this repaired. Serious engine damage will occur if you continue to drive it.

Sep 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Blown head gasket


Look the engine over and see if you can find any external leaks, change the thermostat and make sure that fan(s) are operating.
Check the oil for water...loosing that much, it has to show up somewhere. Blown headgasket usually puts oil in coolant or coolant in oil, causes an external leak from between head and block or goes out through the tailpipe as steam.
look carefully and you will find your problem!!

Apr 27, 2009 | 1991 Toyota Previa

2 Answers

1990 5 speed Honda Accord DX 2 cylinders wont fire


Could be head gasket or piston rings. Piston ring issues will smoke under load or when revving the engine.

Do a compression test.

Feb 27, 2009 | 1991 Honda Accord

1 Answer

Wite smoke and hi temp


white smoke and high temp prestone goes in the cylinder burn come out white prestone goes down because our burning it and you got high temp you need to remove the head and change the head gasket and check the head for for warp or crank good luck pierre

Feb 25, 2009 | 2001 Chevrolet Venture

3 Answers

Newly overhauled toyota corolla 2e engine emits black smoke


I have toyota corona 3s engine it smokes black and fuel consuption is high we have changed the engine oil and cylinderhead gassecate but still black smoke is comming what should i do

Jan 21, 2009 | 1989 Toyota Corolla 2 Door

Not finding what you are looking for?
1991 Toyota Pickup Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8737 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...