Question about 1997 Honda Civic
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a pin in the door handle might have broke off there are two 10 mm nuts that will release the handle but you have to take the door panels off and remove it any local junk yard should have it or can order it for you
Posted on Mar 18, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
1.6L Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise.
I hope help you with this, remember rated this post. Good luck.
Posted on Aug 25, 2009
Testimonial: "Thanks, runs like a charm, now!"
you must carefully pop off the door plastic clips using a screwdriver and prying gently until they pop out , also remove the screws under any small round plastic screw cover inserts and in the plastic door handle area
Posted on Sep 19, 2009
Step one Look at the inside door handle. Behind it you should see a little cover, You pop that off and there will be 2 phillips head screws behind it. remove them.
Pop out the door handle, and unplug the power lock plug,
Youll also have to take the door lock rod, by spinning the plastic door handle 90 degrees until u can wiggle it out.
next remove the sail panel( The little triangle shaped piece in the corner of the door on the top, ( may have a tweeter in it) ( it just pops out)
Next take a screwdriver (flat head) and pry off the cover of the door handle, there will be
2 phillips head screw behind it ( remove screws)
Unplug power window connector (big green plug)
Now just start gently pry the door panel off with a screw driver, see if u can peek behind the panel and see where the panel clips are, and pry near those areas
Posted on Apr 03, 2010
Tips for a great answer:
Dec 16, 2015 | Honda Cars & Trucks
Apr 28, 2011 | 1997 Honda Civic
Mar 29, 2010 | 2003 Honda Civic
Nov 26, 2009 | 1997 Honda Civic
Oct 12, 2009 | 1997 Honda Civic
Oct 09, 2009 | 1997 Honda Civic
Sep 19, 2009 | 2004 Honda Civic
May 26, 2009 | 1997 Honda Civic
Mar 18, 2009 | 1993 Honda Civic 4 Door
83 people viewed this question
Usually answered in minutes!