Question about 1999 BMW 323 Series

1 Answer

Cruise control how to turn cruise control light off

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 427 Answers

If you can drive without cruise control being on, than I wouldnt worry about the problem. I would also look in the troubleshooting manual or call the dealership.

Posted on May 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stabilizer traction control light is on, and lost cruise control


Cruise control will always disable itself when any CEL light is present, so that's normal. The Stabilitrak light problem is a known common problem with these. Your steering wheel position sensor needs to be replaced. Mine does it every morning IF my steering wheel wasn't put into a straight position when I parked it. Straighten the tires, turn the ignition off and restart. Light will go out.

Apr 02, 2016 | 2008 GMC Envoy

1 Answer

My cruise control on my 2001 Kia Sportage stopped working.


Check your repair manual where the vacuum hoses for the cruise controls are (engine bay). Maybe one of the hoses came off or has a leak.

Feb 29, 2016 | 2001 Kia Sportage

1 Answer

Ford focus cruise control


Once you have turned your cruise control on accelerate to desired speed press SET button on right hand side of steering wheel before lifting foot from accelerator, then remove foot from accelerator. pushing RESUME button will deactivate cruise control without turning it off. Then when clear of traffic push resume again to activate cruise control. It will automatically resume to previous set speed.

Apr 30, 2013 | 2006 Ford Focus

1 Answer

How can i reset oil change light of an international maxxforce truck 2012


1. if not already done, set the parking brake.
2. turn the ignition switch to the ON position.
3. turn cruise control on
4. turn cruise control off
5. turn cruise control on
6. very rapidly push the RESUME button four times and then hold for four seconds on the fifth time.
7. oil change light should clear.
8. the time the cruise control is turned on for the second time to the time the fifth activation of the resume button is held down must be within 6-7 seconds, if not you must repeat the process.

Mar 14, 2013 | Cars & Trucks

1 Answer

Cruise control not working


Have you tried pressing the cruise control "on" button once then when you reach your cruise control speed press the "Set/Acc" button. The green cruise light should turn on then.

Jan 08, 2013 | 2002 Mazda Tribute

2 Answers

The airbag light stays on and the cruise control does not work


The air bag light has to do with the air bag sensors in the bumper being bad, or the air bag module being bad.

The cruise control not working has to do with a broken cable from the cruise control mechanism, or a blown fuse for cruise control, or the cruise control being turned off.

Oct 13, 2010 | 1998 Jeep Cherokee

1 Answer

My cruise control will suddenly stop working and the cruise light


I had a similar problem and it turned out to be the brake fluid level. This may be an answer. Also have you had the brakes checked. The cruise control is integrated with the brakes. Any little thing wrong with them effects the cruise.

Oct 02, 2009 | 1991 Toyota MR2

1 Answer

01 Hyundai Elantra - Cruise Control Doesn't Work w/ Headlights On


I had same problem (cruise control/dashboard lights) for the past month with my 2000 Elantra. Replace the tail lights bulbs - my problem was caused by a problem with the double filament within the bulb. Essententially, there was a short when I turned on the lights or hit the brakes.

I did this last night and everything is working properly now.

Sep 10, 2009 | 2001 Hyundai Elantra

2 Answers

Cruise Control on 2 door Sport 4x4 with SOHC: Non-working cruise control. When turned on, cruise control does not engage, no dash light indication either.


look in your owner's manual for the location of the cruse control fuse it is different from other fuses usually much larger

May 21, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
1999 BMW 323 Series Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...