Question about Chevrolet Cavalier

Open Question

2000 chevy cavalier batt1 fuse digram - Cavalier Chevrolet Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 94 Answers

SOURCE: fuses panel digram

http://i28.photobucket.com/albums/c216/thomaspedemon/00fusepanel3of2.gif

http://i28.photobucket.com/albums/c216/thomaspedemon/00fusepanel1of2.gif

http://i28.photobucket.com/albums/c216/thomaspedemon/00fusepanel2of2.gif

follow links for fuse panel diagram
function configureToolbar() { parent.frames["etitle"].updateCurrentItem("011", ""); parent.frames["etitle"].updateTitle("Circuit Protection/Fuse Panel", ""); } 

Posted on Jun 30, 2009

Ad
  • 63 Answers

SOURCE: where i can i find a diagram for the fuse box of a

Sometimes it a sticker on the fusebox cover otherwise it's in the owners manual, if you don't have the owners manual you can look it up on chevy's website

Posted on Aug 18, 2009

ZJLimited
  • 17970 Answers

SOURCE: replace a fuel pump on 2000 chevy cavalier

REMOVAL & INSTALLATION
(see Figures 1 and 2)

CAUTION The fuel injection system remains under pressure, even after the engine has been turned OFF. The fuel system pressure must be relieved before disconnecting any fuel lines. Failure to do so may result in fire and/or personal injury.

  1. Relieve the fuel system pressure using the recommended procedure.
  2. Disconnect the negative battery cable.
  3. Drain the fuel tank, then remove the fuel tank from the vehicle.
  4. While holding the modular fuel sender assembly down, remove the snap-ring from the designated slots located on the retainer.

WARNING The modular fuel sender assembly may spring up from its position. When removing the modular fuel sender from the tank, be aware that the reservoir bucket is full of fuel. It must be tipped slightly during removal to avoid damage to the float.
  1. Remove the external fuel strainer.
  2. Detach the Connector Position Assurance (CPA) piece from the electrical connector and detach the fuel pump electrical connector.
  3. Gently release the tabs on the sides of the fuel sender at the cover assembly. Begin by squeezing the sides of the reservoir and releasing the tab opposite the fuel level sensor. Move clockwise to release the second and third tabs in the same manner.
  4. Lift the cover assembly out far enough to detach the fuel pump electrical connection.
  5. Rotate the fuel pump baffle counterclockwise and remove the baffle and pump assembly from the retainer.
  6. Slide the fuel pump outlet out of slot, then remove the fuel pump outlet seal.

To install:
  1. Install the fuel pump outlet seal, then slide the fuel pump outlet in the slots of reservoir cover.
  2. Install the fuel pump and baffle assembly onto the reservoir retainer and rotate clockwise until seated.
  3. Install the lower retainer assembly partially into the reservoir. Line up all 3 sleeve tabs. Press the retainer onto the reservoir making sure all 3 tabs are firmly seated.

Gently pull on the fuel pump reservoir from retainer to assure a secure fastening. If not secure, replace the entire fuel sender.
  1. Attach the fuel pump connector.
  2. Fasten the CPA connector to the fuel sender cover.
  3. Install a new external fuel strainer.
  4. Install the modular fuel sender.
  5. Install the fuel tank in the vehicle.
  6. Connect the negative battery cable.
  7. Pressurize the fuel system and verify no leaks.
35a484a.jpg

Fig. 1: The module fuel sender assembly is mounted in the fuel tank

fbd4d43.jpg

Fig. 2: Modular fuel pump component identification




Hope this help to solve your problem (remember comment and rated this).

Posted on Apr 25, 2010

Gozer
  • 435 Answers

SOURCE: 2000 Cavalier: Spark plug gap for a 2.2L Chevy Cavalier 2000...

The plug gap is .040

Posted on Jun 02, 2010

  • 540 Answers

SOURCE: 2000 chevy cavalier fuse for odometer?

unfortunately it is not the fuse it is the odometer broken internal to the cluster you will need an entirely new instrument panel assemble to remedy the problem, if you purchase one from the wrecking yard and have installed you will be forced to stick with whatever mileage comes on it, if you have a new one installed from the dealer they can program it to match the stored mileage in your origional cluster

Posted on Jun 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse box digram for 1995 chevy cavalier


I suggest visit this link to download the 1995 Chevrolet Cavalier-owners-manual

Hope this helps (remember to rate and comment this answer).

Apr 12, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

My head lights wont come on i have a 2000 chevy cavalier


check the fuse box first to see if a fuse is blown if that's not it it may be the switch needs replaced

Nov 20, 2010 | 2000 Chevrolet Cavalier

1 Answer

I have a 2000 chevy cavalier were is the fuse box


the fuse box is on driver side on side of dash

Aug 04, 2010 | 2000 Chevrolet Cavalier

1 Answer

2000 chevy cavalier fuse for odometer?


unfortunately it is not the fuse it is the odometer broken internal to the cluster you will need an entirely new instrument panel assemble to remedy the problem, if you purchase one from the wrecking yard and have installed you will be forced to stick with whatever mileage comes on it, if you have a new one installed from the dealer they can program it to match the stored mileage in your origional cluster

Jun 11, 2010 | 2000 Chevrolet Cavalier

1 Answer

Needing a fuse box diagram


wow you need it too huh?i have a 1990 and needed it also..you would never guess where you can get it..and for FREE..your local library has every wiring diagram and fuse diagram you need in the reference section...

Jul 12, 2009 | 1988 Chevrolet Cavalier Z24

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...