An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert that has over 500 points.
An expert who has answered 200 questions.
Re: can not shift gears
You have a bad shifter. it's locked.
you will have to take it to a specialized shop, " DO NOT TAKE IT TO A REGULAR SHOP " unless you want to pay three times more...they have to have the required tools and software to do it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to have someone or two to push the car to get the pressure
off. If you are facing downhill have them push the front end, if uphill
push the back. Release parking brake first because that will keep it
from moving. After pushing a few inches you should be released and can
shift but be carefull you don't run anyone over (go for neutral with
foot on brake) Hope this helps.
there is a u shaped clip that holds handle on stem, pull that and then pull handle off and then push down on the white stick that is in center of shifter and see if it can move out of park then, also make sure your foot is on brake ! if that that does'nt work then there is a little solenoid down by shifter that has to move when you put foot on brake so's that it will let you shift it (safety device) it may be bad or bad connection.
if you look on the center council where the shift lever is you will see a small plastic button on the drivers. Remove the button. Insert a small screwdriver into the hole and push down. You will then be able to move the shift lever into nuetral and push the car.
cord??dont you mean a cable ,this is the inhibitor so you cant put in gear without brake on .as button pushes in it pulls the cable up which in conjuction with brake releases the gearchange.it is possible to remove the lot just like the cars of yester year