Question about 1992 Chrysler Lebaron

1 Answer

The car will turn over but won't fire? - 1992 Chrysler Lebaron

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a similar problem with a 1991 LeBaron. While it would start, it ran really rough. I found that the large plug in connectors in the wiring that contain multiple connections have a tendency to come loose and/or need to have corrosion cleaned out of them. The one on the driver's side by the engine was my problem. Maybe your's too.

Posted on Sep 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car won't start 2003 Dodge Stratus sxt coupe cranks but won't start what could b the problem? I tried spraying starting fluid in the air system but it still won't start!


i would check and see if spark pluges are firing. you can take one out and plug into spark plug wire then let the bottom of the plug sit on engine and get someone to try to start while you look at the plug to see if there is any fire. if you have no fire or fuel it would be the crankshaft sencer. it could be the timing belt but the motor would sound different turning over then it used to.

Dec 22, 2012 | Cars & Trucks

1 Answer

94 volvo 960 wagon engine turns over but it won't


have you check for injector pulse? if no pulse or no ignition fire, most likely it is the ECM.

Jun 13, 2012 | Cars & Trucks

1 Answer

2002 Mitsubisihi Lancer will turn over but not fire


If the plugs aren't firing then it won't turn over. You must have something else going on. "turns over" to me means it is getting fuel and the plugs are firing. Are you sure it is turning over? If it isn't turning over then the starter is grinding away and nothing is happening or you just hear a clicking noise but when a car is turning over you hear it running, meaning it is firing on all or some cylinders.

Mar 21, 2012 | 2002 Mitsubishi Lancer

1 Answer

Turns over won't fire


need more info :engine getting gas up in cylinders,this car known for bad fuel pumps

Feb 07, 2012 | 2003 Chevrolet Cavalier

1 Answer

1993 gmc 1500 350cid - engine turns over but will not start. Fuel is good


Hello and welcome to FixYa!
If it's not turning over then the problem will be on the firing. If there's no current to the plugs, the engine won't fire up. Few things to look at to resolve the issue... First, the ignition coil can be faulty. Second, The ignition switch can be faulty. Third will be the starter. If it's faulty, it won't kick the flywheel. One good reason why it won't turn over.
Hope this helps and thank you for using FixYa! Have a good one!

Apr 28, 2011 | 1991 GMC C1500

5 Answers

Truck wont crank. we have put new distributor cap, rotor button, coil pack, plugs, wires, and fuel pump. we also checked our firing order.


you said you repl dist cap that means you don't have a crank sensor you have electronic ing module. remove your elec ing module have it tested most auto parts stores could test your module, or check your coil at the neg terminal. should have power. if not you lost your primary volt from your batt.your secondary power is coming from your electronic ing module from the module to the pos terminal on the coil, when the eng cranks,from the coil to the dist cap , from the dist cap center to the rotor then out to the plugs,this all happen pervided the timing belt or timing chain is ok. the cumbustion chainber needs 3 things , thats fuel, air, and spark.

Apr 17, 2011 | 1996 Chevrolet K1500

Not finding what you are looking for?
1992 Chrysler Lebaron Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...