Question about Daihatsu Charade

Open Question

Diahatsu terios 2004 key wont turn in ignition seems jammed

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: Key wont turn to Ignition point

you need to buy a new ignition tumbler

Posted on Dec 14, 2008

  • 5 Answers

SOURCE: ignition locked will not turn

had the same problem with a 99 dodge van. tow truck driver put the key into the ignition and tapped it a couple of times while turning the key to freed it up and start the engine. works as long as you leave the key in the ignition so i use a second key to lock/unlock the van. hope this works for you. gary

Posted on May 20, 2009

iambanshee74
  • 3489 Answers

SOURCE: my key wont turn in the ignition

you have 2 options here, 1 you can call a lock smith a see if he can dig out anything left behind or 2 you will need to replace the tumbler assembly in the steering column. it should come in 2 parts: tumbler and electrical switch. just get the tumbler and be sure to save your key for the door. happy holidays

Posted on Dec 24, 2009

  • 4 Answers

SOURCE: mitsubishi galant 2004 key stuck in ignition

1st Remove Battery cable from Battery because the only time the air bags will deploy is when the key is in the ignition. I have tilt steering and when I put the steering wheel in the up most position. I came right out. But now it seems to stick more lately.

Posted on Jan 02, 2010

alicantecoli
  • 22156 Answers

SOURCE: have lost key how can I have another cut , do we

2002 then yes most definatly ,dealer only job

Posted on Nov 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 gmc envoy. key wont turn in the ignition, wheel is not locked shifter wont move, and brakes are very stiff. looks like key wasn't all the way in off postion when removed


The lock cylinder may be jammed and will probably need to be pulled and fixed or replaced. Excessive wear over time with the pins in the cylinder can cause this, particularly with older vehicles.

Jul 03, 2017 | GMC Cars & Trucks

1 Answer

Why does engine warning light keep coming on?


Most common fault is a sensor, possibly the engine temperature sensor or the lambda sensor. You should read you fault codes (DTCs) in a workshop or Google the procedure for "blink code DTC retrieval" . On Daihatsu you can do a lot of things by connecting two specific contacts in the diagnostic connector above the driver legs, then turn ignition on. Like DTCS, coding keys and remotes etc.

Mar 26, 2016 | 2004 Daihatsu Terios

1 Answer

Does the 2008 Terios have a transponder or just the separate remote?


I am taking a bit of a guess because I don't have information on such a late vehicle but I think it is a fair bet Diahatsu are using embedded transponder chips in the keys with a steering lock/ignition switch mounted receiver.

That was a popular trend among manufacturers and was the system employed by Diahatsu in their earlier models with a master key and up to three slave keys. They are more likely I think to leave the basic system as it is and just add a remote locking system than to develop an entiely new system at unnecessarily high cost.
They could have cribbed a system from another manufacturer of course...

The Ford PAT system was just about identical and gave little trouble and they bridged the gap by fitting remote locking and providing a remote.
The Renault system was similar but many models were very troublesome as they aged and the immobiliser was soon updated and was integrated with the key "plip"

Both these manufacturers use a dashboard mounted light to indicate whether the immobiliser had been successfully disengaged but I have no information about the Diahatsu other than a note dedicated diagnostic equipment is required for key coding.
I am sorry this hasn't been much help.

Feb 02, 2015 | 2008 Daihatsu Terios 1.5

1 Answer

1997 Terios center differential lock clunking when switched on problem with driving when engaged


sounds like you have a bad universal joint when you put it in 4 wheel drive ,

Sep 15, 2014 | 2004 Daihatsu Terios

1 Answer

My 11/2000 Diahatsu Terios starts if left but wont rev up over 2000rpm and slowly gets worse and cuts out and wont start like its starving for fuel?


I think you should check the fuellines and for sure the injectors,these are most probably blocked.It can also be the fuelfilter that is clogged
Staert by replacing the filter and try to start.Once its starts leave it running stationary and remove the fuellines one by one from the injectors.If you loosen the first one and the engine rpm go down a bit you know the injector is good...tighten the fuelline again and move on to the next one and so on.

Mar 16, 2014 | Cars & Trucks

2 Answers

Cannot turn key in ignition to start car even after checking transmission and even rocking the car to make sure it is in park.


put key in ignition. tap back side of key with hamer or screwdriver etc towards the ignition. like youre trying to tap it further into ignition. not extremely hard but hard enough and it will turn. I promise you, it wil turn and start car, no problem. Marc

May 28, 2011 | 2004 Chrysler Sebring

1 Answer

Key wont turn in my 2004 GMC Sierra that was recently broken into...


I imagine that they tried jamming a screw driver or something into the ignition. You will most probably need a new key and tumbler

Mar 28, 2010 | 2004 GMC Sierra

1 Answer

Ignition key is stuck in the cylinder


Did u try turning the steering wheel slightly in either direction? The steering wheel can 'jam' causing the key to seem stuck in the ignition. Simply turning the steering wheel a bit relieves the pressure and the key will turn. Let me know if this works for u

Nov 27, 2008 | 2004 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...