Question about 2005 Audi A3

1 Answer

Audi a3 clutch problems

Right dunno if anyone can help.. my car struggles to get into reverse gear crunchs and clutch bites right at the bottom i tried bleeding the slave changing the fluid replacing the slave weird thing is its worse when warm the clutch is fine doesnt slip but i know this setup uses a dual mass flywheel which i am unfamiliar with and maybe this is the problem anyone help Additional Details - right there is nothing wrong with the master slave or pipework inbetween deff no air in the system and it cant be oil on friction plate because clutch is stong doesnt slip at all!!! think im gonna have to strip it just wondered if anyone had this probably before

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

The problem is very unlikely to be your flywheel it sounds as if your clutch diaphragm spring is either cracked or distorted.Sorry but it sounds like a gear box /clutch job not to bad .The scheduled time is 2.6hrs hope this helps

Posted on May 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car is over revving going to 1000 rpm at idle what is it please help Audi A3 s line 2.0 tdi


Revving on Idle ' Audi-Sport.net

www.audi-sport.net > ... > A3/S3/Sportback (8P Chassis)
Feb 1, 2012 - My Car 58 S3, as of last night decided to start revving whilst on idle, I found a clip ... I can do or is it going to be a trip to audi for them to pull my pants down! ... Lots of members all over the UK have VCDS, have a look at the VCDS .....and as the engine warms up it'll auto-rev to 1000rpm every time i sit at idle. Car revving itself on idle ?
Sep 23, 2013
Whining noise when accelerating, any ideas?
Mar 15, 2012
More results from www.audi-sport.net

[FIXED] Audi A4 RPM Idle Problem - YouTube

? 2:48
https://www.youtube.com/watch?v=EG71Jz9l6qY
Feb 5, 2011 - Uploaded by RickyTomatoes
[FIXED] Audi A4 RPM Idle Problem .... whole lot more and sometime i can even feel like the engine is just gonna die. sometimes it does it some other times it does ... Our cars shouldidle at 900. ... AUDI A3 1.6 IDLE PROBLEM!

When getting into first gear, is revving to 2000 RPMs before ...

https://www.reddit.com/.../cars/.../when_getting_into_first_gear_is...

RedditSep 3, 2014 - When getting into first gear, I bring the revs up to around 2000 RPM right ... Being able to get going without any throttle is fairly dependent on car size and ...Thats how I have a 300,000 kay clutch still on my audi with no slippage. ... Clutches ought to last well over 100,000 miles if they are not abused, and ...

Revs going up and down while car is stationary - AudiForums.com

www.audiforums.com > ... > Audi Models > Audi A4 > B7 Models

Jan 21, 2016 | Cars & Trucks

1 Answer

My Audi A3 2.0 fsi sline Quattro is struggling to find gears ( very stiff to change and impossible to find reverse with the engine running)


First check the fluid level and make sure it is correct. If it's good you will then need to go to the dealership to have the codes pulled. I hope the problem is the fluid because it will be expensive otherwise.

Jan 04, 2015 | 2005 Audi A3 2.0

1 Answer

Reverse gear crunching


Hi. Maybe a vacuum leak or a auto choke issue keeping the idle high. If the idle is too high then the reverse gear will crunch.

Mar 21, 2014 | 1989 Volkswagen Golf

1 Answer

Gear hard change


Sounds like your clutch may be going

Mar 10, 2014 | Audi A3 Cars & Trucks

1 Answer

Audi A3 reverse lights not working


I don't think any parts are needed, it sounds like a problem that could be fixed with a simple cable or linkage adjustment

Mar 05, 2014 | 2007 Audi A3

1 Answer

How much does it cost 2 have a clutch replaced on a citreon xsara


Before you race out and replace the clutch which will not be cheap for your car have a good look at the slave cylinder for leaks . Check and bleed the clutch system and have the clutch m/cyl checked. Crunching gears means the clutch system is not disengaging properly

Apr 08, 2013 | Cars & Trucks

1 Answer

My son has a '91 Pulsar, 5 door hatch. When he changes into reverse, the gear "grates", we beleive the clutch needs to be adjusted, is this correct? (he has no bother with any other gear...


When the engine is idling and the gear box selector is in Neutral all the internals of the gearbox are rotating. Pushing in the Clutch disconnects the drive from the engine to the gearbox but it takes a few seconds for the gears in the box to cease rotating. All the forward gears have synchromesh so there will be no crunching noise ifa forward gear is selected immediately the clutch is pushed in before allowing the gears to stop spinning. On the other hand Reverse has No synchros and therefore selecting reverse before waiting a few seconds for the gears to stop spinning will produce the crunching noise you have described.
So it pays to wait a second or two after pushing in clutch before Reverse is selected to minimise the crunch and if the clutch appears to be working correctly in normal driving ,then no adjustment is necessary.

Dec 22, 2010 | Nissan Pulsar Cars & Trucks

1 Answer

Audi A3 2.0 tdi sport(2005 "55") Clutch/1st & reverse gear


sounds like a bent tooth on a syncro gear in the trans

Jan 23, 2010 | 2005 Audi A3

1 Answer

There is a whizzing noise when changing gear Audi a3 55 reg!


if its only when you put your foot on the clutch it could be a release bearing fault,does it do it when you are not moving and put your foot on the clutch(engine running of course)

Oct 26, 2008 | 2007 Audi A3

1 Answer

Gear Selection Audi A4


GEAR LINKAGE ADJUSTMENT IS UNDER GAITER PLUS REMOVE ASHTRAY .......BUT I WOULD CHECK FOR WORN OR DAMAGED GEAR LINKAGES ....CLUTCH FAULT WOULD BE THE NEXT THING

Aug 14, 2008 | 2003 Audi A4 Cabriolet

Not finding what you are looking for?
2005 Audi A3 Logo

Related Topics:

1,923 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13567 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...