Question about 1999 Daewoo Lanos

Open Question

How to adjust rear brakes on a daewoo lanos - 1999 Daewoo Lanos

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: seat and steering adjustment on the daewoo lanos

check uder or to the sides to move the seat and to adjust the steering wheel there should be a small leaver at the left side of the steering wheel

Posted on Jun 05, 2009

Ad
stevenhurc
  • 450 Answers

SOURCE: binding brake

hand brake cable adjuster lives under centre console at rear 10mm spanner required unadjust this and then remove rear drums to adjust linings so they just drag on drum then go back and adjust cable in car

Posted on Jun 29, 2009

  • 10865 Answers

SOURCE: The blinkers and brake lights on my daewoo Lanos not working

Hello. As you know, this car was only made for six years by the Korean automaker. For some if not all of these cars the flasher is behind the instrument cluster. It is accessible through an access panel on the side of the dash by the driver's door. The flasher is most likely green on a violet block.
That said, in addition to the flasher being a possible culprit I would also suspect a relay, and a poor ground wire. Trace the ground wire from these lights to the frame of the car and make sure you have a good solid connection, with no corrosion. If the contact point is corroded relocate the ground screw and make sure that you have scraped and sanded the spot so you are contacting bare, clean metal.

Posted on Dec 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Notchy gear change on my daewoo lanos


Hi GJ, If the box is auto check the oil level in the box. You should do that with the park brake fully employed and the engine at idle speed with the selector in neutral. If the box is manual check the clutch adjustment, it should take about two and a half inches up from the floor. If the notchy change is only on one gear you may have a synchromesh cone problem and that means a box rebuild. Regards John

Jun 17, 2012 | 1999 Daewoo Lanos

1 Answer

Cable brake no funcion


the handbrake: worn brake shoes, improper adjustment, or broken cable,
cable brake: here

Feb 10, 2010 | 1999 Daewoo Lanos

2 Answers

I need part number for the rear wheel bearings left and right , inner and outter for Daewoo lanos 2000 model


Daewoo rear wheel bearing parts numbers are
94535209 and 94535218....one each per side

Jan 06, 2010 | 2000 Daewoo Lanos

1 Answer

Seat and steering adjustment on the daewoo lanos


check uder or to the sides to move the seat and to adjust the steering wheel there should be a small leaver at the left side of the steering wheel

Jun 04, 2009 | 1999 Daewoo Lanos

1 Answer

Binding brake


hand brake cable adjuster lives under centre console at rear 10mm spanner required unadjust this and then remove rear drums to adjust linings so they just drag on drum then go back and adjust cable in car

Jun 03, 2009 | 1999 Daewoo Lanos

1 Answer

Brakes


rears first then fronts ,just undo nipples and let it drip on its own when no more air bubbles close the nipple ,and dont re-use the old fluid it has absorbed water from air because its hydroscopic

Jun 02, 2009 | 1999 Daewoo Lanos

1 Answer

Daewoo lanos


your brakes are keeping i on the dum try a puller and a hammer

Oct 18, 2008 | 1999 Daewoo Lanos

1 Answer

Daewoo front brakes


The single-piston floating-caliper disc brake is self-centering and self-adjusting. The caliper is able to slide from side to side so it will move to the center each time the brakes are applied. Also, since there is no spring to pull the pads away from the disc, the pads always stay in light contact with the rotor (the rubber piston seal and any wobble in the rotor may actually pull the pads a small distance away from the rotor). This is important because the pistons in the brakes are much larger in diameter than the ones in the master cylinder. If the brake pistons retracted into their cylinders, it might take several applications of the brake pedal to pump enough fluid into the brake cylinder to engage the brake pads

f57055e.jpg

Aug 25, 2008 | 1999 Daewoo Lanos

Not finding what you are looking for?
1999 Daewoo Lanos Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...