Question about 1997 Honda Accord

Open Question

How to replace the thermoswitch of 1997 Honda Accord VTEC automatic Where is the thermo switch located?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

TheAsian
  • 93 Answers

SOURCE: Connector for Speed Sensor on1996 Honda Accord Auto Trans.

If you are talking about just plugging into the speed sensor yes. A VTEC and NON-VTEC are one and the same.

Posted on Dec 13, 2008

breddi2
  • 126 Answers

SOURCE: need to replace radiator in 1997 honda accord se. what are the steps?

First drain radiator by opening drain valve,"located on bottom corner usualy the right,but not always." If you open the overflow or remove cap this will happen much faster.For safety sake disconnect ground wire from battery,the radiator is locked down by top cover that attaches to body with generaly 4 bolts, upper and lower hoses have to be disconnected and if it is automatic the transmission cooling lines are connected in stacked fashion,"one above the other."The cooling fan has to be unplugged and it should be removable at this point,"when unplugging fan be carefull with connector so it doesn't break.reverse steps to replace making sure the bolts go in the right place and it all fits properly.the thermostat,"located behind the kneck of upper hose," should be replaced after connecting lower hose because in order to fill the block up and prevent damaging thermostat the block shoud be filled with coolant before attaching upper hose.

Posted on Apr 20, 2009

  • 88 Answers

SOURCE: 1997 honda accord overheating

give details of your car year model ect they will be able to get relay to suit

Posted on May 20, 2009

greg_margo
  • 1959 Answers

SOURCE: Determining if head gasket is blown on a 1994 honda accord Ex w VTec

White smoke out of the exhaust is one indication that the head gasket is blown. Another is to start the car and check the oil on the dipstick. If it's frothy or looks like a milkshake, this is another indication of a blown head gasket. The milky appearance indicates that coolant is in your engine, caused by a bad head gasket. If none of these symptoms occur, then the problem lies elsewhere. Hope this answers your question and feel free to post back with any other concerns or questions. Thank you.
Greg

Posted on May 23, 2009

outdoorsman5
  • 631 Answers

SOURCE: location of vtec solenoid screen in 1999 honda

Not sure what engine you have but on a 2.3 it is Left front transaxle.
If it is a 3.0 it is located on the lower right of engine.

Posted on Aug 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 Honda Accord 4 cylinder vtec P0715 - Input/Turbine Speed Sensor Circuit Malfunction  automatic transmission most of the time it don't want to go to the other gears stays in first gear


Sounds like your tansmission is in limp mode to protect itself.

you'll probably need to identify and correct the speed sensor problem (at the wheels or at the transmission sensor) before you'll be able to get it out of limp mode.

Feb 21, 2015 | 1997 Honda Accord

1 Answer

Hi i have a 1997 honda acccord lx with a vtec engine i got the check engine light and scanned, recieved dtc code p1259 vtec system failure the symptoms are it driving normal until it reaches 3,500 rpm


If this is a 1997 LX Accord, it did not come with the VTEC, that was only on the EX version in 1997. So someone put an EX VTEC engine in your LX. I've seen this done, and it requires a EX pcm computer. It also needs VTEC wiring to be installed. Check the engine serial # and ID what this engine is from.
If this is actually an EX Accord, then there are more things that can fail than the solenoid. The pressure switch is a common failure.

Oct 21, 2014 | 1997 Honda Accord

1 Answer

Is it necessary to evacuate the refrigerant to replace the pressure switch on a 97 Accord 2.2 VTEC, or is there a shrader valve in the fitting?


THERE IS A ONE WAY VALVE IN PRESSURE SWITCH TO KEEP REFRIGERANT FROM LEAKING OUT.SHOULDNT HAVE TO DISCHARGE THE AC SYSTEM.

Aug 26, 2010 | 1997 Honda Accord

1 Answer

Where is thermo fan switch located on 2004 honda accord


no its a sensor next to radiator its automatic turn on set temperature

May 31, 2010 | 2004 Honda Accord

1 Answer

I have a 2000 honda accord ex... My engine light is on and throwing the p1259 code. It is not a Vtec engine... help. I just got the oil changed and the light is still on. However they put 10w30 in.. should...


The P1259 : is problem in the VTEC Oil Pressure Switch circuit or VTEC Solenoid Valve circuit.
check the wire on the VTEC Oil Pressure if it's loose.

Feb 18, 2010 | 1997 Honda Civic

1 Answer

I have 1997 honda accord 4 cyl vtec..I need to locate the speed sensor and find out how to replace it. is there any diagrams help me?


It's a couple of 10mm bolts on top of the transmission. You might need to remove the air cleaner intake tube, etc to see it. It will have wires and a plug on it. Google a pic of the 97 Accord VSS to get an idea of what it looks like. eBay is the cheapest way to go in replacing it. Parts stores are over priced on this.

Dec 16, 2009 | 1997 Honda Accord

3 Answers

Location of speed sensor on 97 honda accord


think its on the gearbox diff unit

Nov 10, 2009 | 1997 Honda Accord

1 Answer

When i use my turn signals my wipers come on to 1997 Honda Accord EX. 2.2 VTEC


that would mean you have a short in the switch, replace it

Oct 13, 2009 | 1997 Honda Accord

1 Answer

I have 02 accord coupe and it says VTEC and automatic!! How do I know if the VTEC is connected!


ok lets break this down
Vtec= Variable Valve Timing and Lift Electronic Control

if you look on the the motor on the left side youll see 2 things the distributor and the vtec solenoid.. the vtec solenoidif the smaller of the 2 thats it m8 theres 2 wires running from it .. all vtec does is lift the cams on a high 3rd lobe :) rides in the middle of the 2 smaller cam's on a automatic it should pop around 5.200 rpms on a honda ecu thats not tuned.. also a exaust helps or a intake that produce a higher tone thats unmistakeable when vtec hits.. its a beautiful thing hit me up with any! honda stuff ive done swaps to my 92 prelude si 2.2l vtec and many more so i know a honda engine and wireing like theback of my hand

Aug 11, 2009 | 2002 Honda Accord

Not finding what you are looking for?
1997 Honda Accord Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...