Question about Dodge Charger

Open Question

1973 Dodge Charger steering column blow up view diagram.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 1993 buick regal steering column repairs

http://www.alldatadiy.com/

Posted on Aug 31, 2008

raycrazek
  • 106 Answers

SOURCE: diagram of 1993 s-10 steering column

go to your nearest chevy dealer parts dept. and ask for a blow up of the steering column. most of the time they are very helpful for the do it yourselfers.. but there aint nothin like the good old chiltons auto manual.. good-luck, ray

Posted on Jan 16, 2009

csmock132
  • 4669 Answers

SOURCE: nned steerin column diagram

I don't have a diagram, But I have taken tons of these apart. Is there something I can help with?

Posted on May 04, 2009

  • 1 Answer

SOURCE: 1985 ford F150: Turned key to start my truck, and

It *might* also be the ignition switch. I had this happen in my 1988 F150, so I took it apart. The rod is fine, but further down into the dash (you will have to unbolt the column to lower it) is a set of relays. The rod switches it between them to choose what the electricity does, and I think my starter relays ended up broken.

Posted on Jul 15, 2009

  • 113 Answers

SOURCE: steering column diagram for 1993 s-10 blazer

a haynes manual from the parts store will have that in there. about 20 bucks for the manual.

Posted on Jul 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the easiest way to remove a start from a


there is no easy way I included diagram of bolts, to remove that's easy, before that you must unbolt steering column there is 1 bolt right in front of starter ,before you unbolt it make sure that wheels are straight ahead and steering wheel locked in place, remove bolt and push or compress steering column and move to side, remove wires and note witch ones go where , drop starter down to remove.
I really hope this helped you if it did please let me know
Thanks Woody

Sep 24, 2014 | 2008 Dodge Charger

1 Answer

Removing ignition lock cylinder


As I remember it, you pulled the steering wheel to get to the pin in the lock cylinder. You had to turn the key to on or start then push the pin to release the cylinder.

Sep 30, 2012 | Cars & Trucks

1 Answer

How do i remove the ign. sw. from a 1973 dodge challenger?


Pull the steering wheel. Remove the column cover and there is a spring band round the ignition mechanical part which when raised releases it. They also had an internal spring design which had a small hole in the casing.- put a punch in the hole and remove the tumblers with the key turned to accessories. The electrical was held on with a small screw.

May 26, 2011 | Dodge Challenger Cars & Trucks

1 Answer

How to remove a heator core from a 2001 dodge caravan? do you have to take the dash out? or just the bottom pannel.


The 2001 Dodge caravan has 2 heater cores - front (the main one), and the rear. Removal of the
rear heater core is a whole different procedure than the front.

Front Heater Core - Removal and Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Align the wheels in the straight-ahead position.
  3. Disconnect the negative battery cable.
    CAUTION Before working around the steering wheel or the instrument panel all 2 minutes to pass to allow the air bag module to discharge.
  4. Drain the cooling system into a clean container for reuse.
  5. Remove the steering column, by removing or disconnect the following:

    Lower left side steering column cover Parking brake release cable from the parking brake lever 10 steering column cover liner-to-instrument panel bolts and the cover liner
  6. Rotate the key to the LOCK position; then, rotate the steering wheel to the LOCKED position.

    Gear selector cable and its mounting bracket as an assembly from the upper steering column mounting bracket 2 instrument cluster trim bezel-to-instrument panel screws, retaining clips and bezel 2 steering column shroud-to-steering column screws and the shroud Steering column-to-intermediate steering shaft coupler
  7. Loosen but do not remove the 2 lower steering column mounting bracket nuts/washers.

    2 upper steering column mounting bracket nuts/washers Steering column assembly from the vehicle
  8. Remove or disconnect the following:

    Instrument panel-to-chassis harness interconnect and bracket Lower silencer boot, at the base of the steering shaft
  9. Working in the engine compartment, pinch off the heater hoses.

    Heater core cover. Position some towels under the heater core hoses. Heater core plate and the hoses
  10. Depress the heater core retaining clips.
  11. Lift the accelerator pedal and slide the heater core past it.
  12. Depress the brake pedal and remove the heater core from the heater/air conditioning housing assembly.

    0996b43f8022fa83.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the steering column assembly


    0996b43f8022fa84.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the interconnect and bracket


    0996b43f8022fa85.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the front heater core assembly


To install:
  1. Depress the brake pedal and install the heater core into the heater/air conditioning housing assembly.
  2. Lift the accelerator pedal and slide the heater core past it.
  3. Install or connect the following:

    Heater hoses (using new O-rings) and the heater core plate Heater core cover Heater hoses clamps, working in the engine compartment Lower silencer boot at the base of the steering shaft Instrument panel-to-chassis harness interconnect and bracket
  4. Install the steering column assembly by installing or connect the following:

    Steering column assembly, carefully into the vehicle. 2 upper and 2 lower steering column mounting bracket nuts/washers. Torque the nuts to 105 inch lbs. (12 Nm). Steering column-to-intermediate steering shaft coupler and tighten the pinch bolt to 21 ft. lbs. (28 Nm) 2 steering column shroud and the shroud-to-steering column screws Bezel, the retaining clips and the 2 instrument cluster trim bezel-to-instrument panel screws Gear selector cable and its mounting bracket as an assembly to the upper steering column mounting bracket 10 steering column cover liner and the cover liner-to-instrument panel bolts Parking brake release cable to the parking brake lever Lower left side steering column cover. Lower left side steering column cover
  5. Refill the cooling system.
  6. Connect the negative battery cable.
  7. Run the engine to normal operating temperatures; then, check the climate control operation and check for leaks.

Jan 02, 2011 | 2001 Dodge Caravan

1 Answer

1998 dodge grand caravan steering column diagram


Sounds like a bad ignition switch and pins in the column.

Jul 17, 2017 | 1998 Dodge Grand Caravan

1 Answer

I have a 1973 Camaro with the factory tilt steering column and it's starting to get loose. What does it take to fix this? Are there any part breakdown diagrams?


if you can, pull steering wheel, steering lock wheel(spring compressor needed,from auto parts store,free) pull signal switch (three screws) out far enogh to see tilt mechinizm, there are three black bolts to be tightened, if you wiggle the tilt column you should see them loose, a small socket will fit star shaped bolt heads

Apr 25, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

The horn keeps going off what could be wrong


It could be the horn switch on the steering column. Disconnect the harness coming from the steering column at the bottom when the horn is blowing, if that stops the horn then the problem is the switch below the steering wheel

Jan 03, 2009 | 2004 Dodge Ram 1500

1 Answer

Diagram of 1993 s-10 steering column


go to your nearest chevy dealer parts dept. and ask for a blow up of the steering column. most of the time they are very helpful for the do it yourselfers.. but there aint nothin like the good old chiltons auto manual.. good-luck, ray

Dec 29, 2008 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...