Question about 1992 Chevrolet Cavalier

1 Answer

I need to replace the ingition switch on my 1992 chev cavalier wagon. I got the steering wheel off and all the conncetions. There are 2 pressed in rivets or some kind of unremovable fasteners that prevent me from removing it all the way. How do I get Those off?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 40 Answers

Drilling a hole in each rivit or headless bolt and using a easy out
fun, fun, fun

Posted on Sep 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the cover behind the steering wheel to pop open on a 1994 Chev z24 Cavalier so I can change the wiper switch?


There is a special tool that screws onto the steering wheel threads and compresses the lock plate to release the snap ring so the lock plate will come off. It's a strong spring, so you'll have to rent the tool if you can't borrow one.

Dec 06, 2016 | 1994 Chevrolet Cavalier

1 Answer

How do I replace headlight dimmer switch on a 2003 chev impala do I have to pull the steering wheel


Yes , the steering needs to be pull .
Disable the SIR system. Refer to SIR Disabling and Enabling in SIR. Remove the steering wheel. Refer to Steering Wheel Replacement . Remove the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement .
Important: The abrasion sleeve located on the steering column wire harness assembly must be reinstalled. Make note of what connector is coming out of the abrasion sleeve for installation purposes.
Remove the wire harness assembly (1) from the wire harness strap (2). Disconnect the turn signal and multifunction switch assembly connector from the SIR system coil connector.
There could be a video on youtube show how to do it .
Theret

Oct 20, 2016 | Cars & Trucks

2 Answers

Replace wiper switch


wiper and washer switch in steering column you more likely need to remove steering wheel to get to switch two mountings screws on the right side.disable airbags before replacing switch. first turn off radio ignition switch off then disconnect negative battery cable. wait 20 minutes before removing steering wheel and remove steering column.

Sep 12, 2013 | Cars & Trucks

1 Answer

My husband changed the plugs and wires for my fathers Chevrolet 1992 cavalier wagon... now it's not running as well as before he replaced them and he's concerned they are not in the right firing...


It will vary on the size of the engine, It depends on which engine you have.
V6 1-6-5-4-3-2
V4 1-3-4-2. Hope this helps!

Best Wishes and Good Luck!

May 05, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

I need to replace the multi-function wiper switch on a 2003 Chev express van, what type of screw driver is needed to remove the steering column housing that contains the switch?


the switch is underneath the steering wheel. the steering wheel needs to be pulled to replace the switch. the airbag is in the steering wheel, and a trained tech with a puller is needed to pull that wheel off without screwing up the airbag.

Oct 30, 2010 | 2003 Chevrolet Express

1 Answer

My turn signals stopped working in my 1992 chevy cavalier...what should i do? i dont have alot of money...


you have not told us whether your hazrd lights are working.......if they are, then you will have to replace your turn signal switch, which will require removal of the steering wheel, and cover surround.......if your hazrd lights are not working, you will have to replace your blinker relay, because the hazard lights use this relay also, it is a good indicator of a relay failure.....

PLease vote if you liked this response

Aug 20, 2010 | 1992 Chevrolet Cavalier

1 Answer

1992 cavalier ignition switch and key assembly


The following procedure is "generic" for replacing the lock cylinder. There are a couple of specialized tools you will need and saftey precautions concerning the air bag system.
Take a look and let me know if you wish to tackle the job.
Regards,
To remove the ignition lock:
CAUTION You must remove the steering wheel when replacing the ignition lock. On vehicles with a Supplemental Inflatable Restraint (SIR) system, you must temporarily disable the SIR system and remove the inflator module when removing the steering wheel. Leaving the SIR system on could result in deployment of the air bag and possible personal injury.

  • Disconnect the negative battery cable, and remove the steering wheel.
  • Remove the bumper and the carrier snapring retainer from the steering shaft.
  • Use a lock plate compressor screw tool to install the lock plate compressor screw in the upper steering shaft. To keep the shaft from telescoping, tighten it to 40 inch lbs.
  • Using the lock plate compressor tool, install on the upper steering shaft, tighten it to depress the shaft lock. Remove the shaft lock retainer, the compressor tool and the steering shaft lock.
  • Remove the turn signal canceling cam assembly. Put the turn signal switch in the "N" position and remove the upper bearing spring.
  • Position the turn signal switch so the mounting screws can be removed through the holes in the switch and remove the turn signal lever.
  • Remove the turn signal switch-to-steering column screws and lift the turn signal switch. Remove the wire protector and disconnect the turn signal switch connector.
  • Use a terminal remover tool to disconnect the buzzer switch wires from the turn signal switch connector. Remove the buzzer switch assembly with needle-nose pliers.
  • Place the lock cylinder in the ACC position, then remove the lock retaining screw and the lock cylinder set.
  • To install the new cylinder lock, reverse the removal procedures.
  • Tighten the lock retaining screw to 22 inch lbs., the turn signal switch screws to 59 inch lbs. and turn the turn signal lever screw to 53 inch lbs.
  • As part of the final replacement procedures, check the operation of the switches and the steering column.

Mar 04, 2009 | 1992 Chevrolet Cavalier

1 Answer

1999 Chev Cavalier power steering oil - 4 cylinder


Most older gm cars you can use dexron 2 transmission fluid or find in your local parts store a good brand of universal fluid.

Jun 08, 2008 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
1992 Chevrolet Cavalier Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...