Question about Hyundai Elantra

2 Answers

I had check engine lite on,with dtc p0446.evaporative emission system vent circuit,how i fix it and where is the vent control...... also my air bag lite is on with dtc,nunber (1) can u tell how fix this thanks

Posted by on

  • 1 more comment 
  • leonel alvarado Sep 12, 2010

    i state make and model hyundai elantra with 2.2 engine

  • leonel alvarado Sep 12, 2010

    is a hyundai 2003 elantra

  • leonel alvarado Sep 12, 2010

    in my first time i state model and year but no answer.i had dtc po446 evaporartive,emission system vent control circuit how i fix it and, where(vent control located in the car front ,rear, or where) also air bag lite is on dtc1 lite flahing one, time ( car ishyundai 2003 elantra with 4 cilinders)

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,


Kindly mention the year, make, model and engine of the car.

Thanks!!

Posted on Sep 12, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Expert
  • 1,868 Answers

Hello! I'll need the year, model and engine size...Guru..Saailer

Posted on Sep 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix code p0446 on a pontiac g6


P0446 Evaporative Emission Control System Vent Control Circuit Malfunction. The code P0446 is set when the engine computer recognizes a fault or restriction at the vent control part of the Evaporative emission control system (EVAP).

https://www.obd-codes.com/p0446

Jan 25, 2017 | Pontiac Cars & Trucks

2 Answers

What does code p0446 mean on a 2001 Buick Centry?


P0446 Evaporative Emission Control System Vent Control Circuit Malfunction The code P0446 is set when the engine computer recognizes a fault or restriction at the vent control part of the Evaporative emission control system (EVAP). The description of the fault varies between different car manufacturers, but one thing is common, the code P0446 doesn't directly point to a defective part; some testing might be required to pinpoint the faulty component. What can cause the code P0446: - faulty vent control valve - blockage at the vent hose, vent filter or vent control valve - open or short in the vent control valve circuit - bad charcoal canister - EVAP system leak - faulty EVAP system pressure sensor - bad vacuum switching valve (VSV) - stuck open purge valve (solenoid)

Aug 13, 2014 | 2001 Buick Century

1 Answer

Codes 446 and 452


P0446 has nothing to do with the canistor !
DTC P0446 Evaporative Emission (EVAP) Vent System Performance
This DTC tests the evaporative emission (EVAP) system for a restricted or blocked EVAP vent path. The control module commands the EVAP canister purge solenoid valve Open and the EVAP canister vent solenoid valve Closed. This allows vacuum to be applied to the EVAP system. Once a calibrated vacuum level has been reached, the control module commands the EVAP canister purge solenoid valve Closed and the EVAP canister vent solenoid valve Open. The control module monitors the fuel tank pressure (FTP) sensor for a decrease in vacuum. If the vacuum does not decrease to near 0 inches H2O in a calibrated time, this DTC sets.
DTC P0452 Fuel Tank Pressure (FTP) Sensor Circuit Low Voltage


How to troubleshoot an EVAP Pressure Sensor problem P0452 GM

EVAP Vent Solenoid Code P0446 The solenoid is stuck open !

Apr 23, 2017 | 2005 Chevrolet Silverado 1500HD

1 Answer

P0442, P0446, DTC


p0442 is evaporative emission control system leak detected (small leak, and p0446 is evaporative emission control system vent control circuit malfunction

Jan 15, 2012 | 2002 Lexus ES 300

1 Answer

P0446 EVAPORATIVE EMISSION VENT CONTROL CIRCUIT


DTC P0446 - Evaporative Emission Control System Vent Control Circuit Malfunction
Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM's driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain vacuum during test. There will be no obvious symptoms to driver, other than MIL illumination.

A code P0446 could mean one or more of the following has happened:
Faulty vent valve
Open, short or excessive resistance on Vent valve control circuit
Blockage of vent valve
Bad PCM


With a P0446 OBD-II trouble code, here are some things to try:
Replace Vent valve
Repair open, short, or resistance problem in control circuit
Repair open, or short, or resistance problem in power circuit
Replace PCM


Hope this helps (remember to rating this free answer and leave us some testimonial comment).

Oct 12, 2011 | 2003 Pontiac Vibe

2 Answers

2001 chevrolet sububban po446,452,and 453 how do i fix my check engine light is on and i cant pass in spection


DTC P0446 - Evaporative Emmission Control System Vent Control Circuit
Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM's driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain vacuum during test. A code P0446 could mean one or more of the following has happened:
  • Faulty vent valve
  • Open, short or excessive resistance on Vent valve control circuit
  • Blockage of vent valve
  • Bad PCM
Possible Solutions
  • Replace Vent valve
  • Repair open, short, or resistance problem in control circuit
  • Repair open, or short, or resistance problem in power circuit
  • Replace PCM

DTC P0452 - Evaporative emission control system, pressure sensor low imput
DTC P0453 - Evaporative emission control system, pressure sensor high imput

The PCM monitors the EVAP control system FTP sensor input signal to the PCM. The test fails when the signal average jumps above a minimum allowable calibrated parameter. If both codes are present, it sounds like your fuel tank pressure sensor has failed.

The sensor is on top of the tank and you will have to remove the tank. But your symptoms are pointing to more than just the sensor. You may have wiring problems.


Hope this helps (remember to rate and leave a comment about this free answer).

Sep 30, 2011 | 1998 Cadillac Seville

2 Answers

What does po440 on a 2003 saturn vue mean with a service engine soon light on


That is a problem in the evaporative emission control system.
Could be anything causing it
Clogged filter in the charcoal canister
A leak in one of the vacuum lines
The purge valve not working,,,etc.
The best thing is to take it and have it checked out, they might have to do a smoke test to find the problem.
All they do is inject smoke into the system, if there is a leak the smoke will come out of it. All it takes is a pin hole in these emission systems to screw it all up.

Aug 13, 2010 | 2003 Saturn VUE

2 Answers

I checked the codes and one comes up its po446. i dont under stand what it mean so i cant fix it to get the light to go out.


P0446 Evaporative Emission System Vent Control Circuit.
The following are descriptions of all Evaporative possible codes:

P0441 Evaporative Emission System Incorrect Purge Flow
P0442 Evaporative Emission System Leak Detected (small leak)
P0443 Evaporative Emission System Purge Control Valve Circuit
P0444 Evaporative Emission System Purge Control Valve Circuit Open
P0445 Evaporative Emission System Purge Control Valve Circuit Shorted
P0446 Evaporative Emission System Vent Control Circuit
P0447 Evaporative Emission System Vent Control Circuit Open
P0448 Evaporative Emission System Vent Control Circuit Shorted
P0449 Evaporative Emission System Vent Valve/Solenoid Circuit
P0450 Evaporative Emission System Pressure Sensor/Switch
P0451 Evaporative Emission System Pressure Sensor/Switch Range/Performance
P0452 Evaporative Emission System Pressure Sensor/Switch Low
P0453 Evaporative Emission System Pressure Sensor/Switch High
P0454 Evaporative Emission System Pressure Sensor/Switch Intermittent
P0455 Evaporative Emission System Leak Detected (large leak)
P0456 Evaporative Emission System Leak Detected (very small leak)
P0457 Evaporative Emission System Leak Detected (fuel cap loose/off)
P0458 Evaporative Emission System Purge Control Valve Circuit Low
P0459 Evaporative Emission System Purge Control Valve Circuit High
---
At least the cap isn't loose for the gas tank.

I would clear the code with an OBD-II Scanner 'erase code' button, and see how long it takes for it to come back.

Aug 06, 2010 | 1996 GMC Jimmy

2 Answers

2002 Buick Century, when the tank is 1/4 full,


P0446 Evaporative Emission Control System Vent Control Circuit Malfunction

The evaporative emission control system checks to make sure there are no leaks in the lines that run from the gas tank to the charcoal canister and up to the engine. It also checks to make sure the gas cap is sealing correctly.
It may just be that the cap was not on tight and the code was tripped.

A dusty environment can also clog the vent line and cause this code.
Have the code cleared and see if it comes back. Some auto parts stores like Auto Zone can read and clear the codes for you.
Hope this helps.

Sep 02, 2009 | 2002 Buick Century

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...