Question about 2007 Lancia Zagato

1 Answer

Lancia Air Suspension

Hay
I want to learn more about my Air Suspension recently I have faced a few problem with my Lancia may be I can fix by my self Any suggestion will be nice

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 375 Answers

Control your ride! Autoloc's™ Air Command™ Air Suspension Digital Controller Unit gives you complete control over your 1993 Lamborghini Lm American air suspension system. Featuring fully programmable settings and up to 8 user-defined presets, as well as built-in relay technology to control your air compressor, The Air Command™ gives you total management of your 1993 Lamborghini Lm American air bag system. Control each individual air bag, front and back separately, or all four bags at once! Viewing and adjusting your settings is a breeze thanks to the unit's large LCD screen, which features backlit illumination for easy operation at night! read more in the link below
http://www.thehoffmangroup.com/c/air_suspension/1993_Lamborghini_Lm_American

Posted on May 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear suspension will deflate but why won't it inflate?


That could work , You mite be able to test the sensor in question with ohm meter . Test the front one an see what the resistance is ,then check the back one. I don't know what it should be with out looking it up in the service info . You could also check to see if the sensor is getting power from the control module , an see if there is a return input to the module .
There are a few DTC'S this able to set !
Air Suspension Control Module Diagnostic Trouble Code (DTC) Index
Air Suspension Control Module Diagnostic Trouble Code (DTC) Index DTCs Description Source Action B1318 Battery Voltage Low Air Suspension Control Module Go To Pinpoint Test C . B1342 Air Suspension Control Module Air Suspension Control Module INSTALL a new air suspension control module. REFER to Module-Air Suspension Control . SET the front ride height. REFER to Air Suspension Initialization (Clear DTC B2140). CLEAR the DTCs. REPEAT the self-test. B1485 Brake Pedal Input Circuit Battery Short Air Suspension Control Module RERUN On-Demand Self-Test. MAKE SURE that the brake pedal is not pressed. If DTC is returned again, REPAIR brake pedal position (BPP) circuitry. B1566 Door Ajar Circuit Short to Ground Air Suspension Control Module Go To Pinpoint Test D . B2140 Initialization Failure (Vehicle Ride Height Not Programmed) Air Suspension Control Module REFER to Air Suspension Initialization (Clear DTC B2140). C1439 Vehicle Acceleration EEC-V Circuit Failure Air Suspension Control Module Go To Pinpoint Test E . C1724 Air Suspension Height Sensor Power Circuit Failure Air Suspension Control Module Go To Pinpoint Test F . C1726 Air Suspension Pneumatic Failure Air Suspension Control Module Go To Pinpoint Test G . C1760 Air Suspension Height Sensor High Signal Circuit Failure Air Suspension Control Module Go To Pinpoint Test H . C1770 Air Suspension Vent Solenoid Output Circuit Failure Air Suspension Control Module Go To Pinpoint Test I . C1790 Air Suspension LR Air Spring Solenoid Output Circuit Failure Air Suspension Control Module Go To Pinpoint Test J . C1795 Air Suspension RR Air Spring Solenoid Output Circuit Failure Air Suspension Control Module Go To Pinpoint Test K . C1830 Air Suspension Compressor Relay Circuit Failure Air Suspension Control Module Go To Pinpoint Test L . C1917 Steering Electronic Variable Orifice (EEVO) Out-of-Range Fault Air Suspension Control Module Go To Pinpoint Test Q .
  • Uneven vehicle height
  • Circuitry.
  • Rear pneumatic fault.
  • Air compressor assembly.
  • Air suspension control module.
  • Go To Pinpoint Test I .

Nov 06, 2015 | 2002 Lincoln Navigator

1 Answer

Where is the suspension control module in a 1999 lincolin towncar


Turn air suspension switch off, disconnect neg, side battery, remove panel under glovebox control module located fwd up in frnt of air tube. If replaced the computer will have to re learn driving conditions this could take a few miles of driving.

Feb 22, 2012 | 1999 Lincoln Town Car

1 Answer

The avance is go higher be it self when , i turn the car on or when i choose drive .. some times its go higher alone when its on after while i have more problems wish to help...


Hi,
a Lancia has an automatic engine advance to ensure that the air conditioning does not stall the engine.
I am afraid you will have to clarify your problem somewhat in order to obtain assistance.

Is it a Lancia Beta,...Lancia Scorpion, a four cyl fiat engine, a V4 Lancia engine? is it a Lancia Flavia?
A Lancia Fulvia?

Thank you for your enquiry.

Jan 25, 2011 | Lancia Beta Cars & Trucks

2 Answers

How do I adjust the air suspension on a 1991 buick riviera


it has a automatic sensor on the bottom of this car that self adjust the shocks. The most inexpensive way to repair this is to get a manual fill kit and eliminate the auto self adjusting shocks

May 18, 2010 | 1991 Buick Riviera

1 Answer

00 ford expedition rear self leveling system


Try jacking up the vehicle and putting it on jack stands letting the suspension hang down. Disconnect the battery for a few minuts and reconnect it and it should inflate the airbags and level off the suspension.

Apr 23, 2009 | 2000 Ford Expedition

1 Answer

99 expedition air suspension compressor runs every couple minutes


It is normal for some cycling of the compressor as the ride heights change and the compressor vents and fills air springs. Info:

Air Compressor
The air compressor:
  • Is not interchangeable with the rear air suspension (RAS) air compressor.
  • Consists of the compressor and vent solenoid; neither are replaceable as individual items.
  • Is a single cylinder electric motor driven unit that provides pressurized air as required.
  • Is powered by a solid state relay, which is controlled by the air suspension control module.
  • Passes pressurized air through the compressor air drier that contains silica gel (a drying agent). Moisture is then removed from the compressor air drier when vented air passes out of the system during vent operation.
  • The drier may be replaced separately.
  • The drier has dual ports and is not interchangeable with the RAS drier.
The vent solenoid:
  • Allows air to escape from the system during venting actions.
  • Is part of the air compressor cylinder head.
  • Shares a common electrical connector with the air compressor motor.
  • Is enclosed in the cylinder head casting, which forms an integral valve housing that allows the valve tip to enter the pressurized side of the system.
  • Has an O-ring seal that prevents air leakage past the valve tip.
  • Opens when the air suspension control module determines lowering is required.
  • Provides an escape route for pressurized air when system pressures exceed safe operating levels.
  • Has a 1792 kPa (260 psi) internal relief valve.
  • Is installed with the air compressor as a unit.
Compressor Relay
A solid state relay is used in the air suspension system for compressor control. The relay incorporates a custom power metal oxide semi-conductor field effect transistor (MOSFET) and ceramic hybrid circuitry. The relay switches high current loads in response to low power signals and is controlled by the logic of the air suspension control module.
The compressor solid state relay is energized by the air suspension control module to have high current flow from the battery to the compressor motor.
Control Module
NOTE: The 4WAS control module is also used for the RAS system. The internal processor recognizes external circuitry to determine if it is installed in a 4WAS or a RAS system.
NOTE: The air suspension control module is calibrated with information from the air suspension height sensors. A new or swapped air suspension control module requires the ride height adjustment calibration process to be performed.
A microcontroller-based electronic air suspension control module controls the air compressor motor (through a solid state relay) and all system solenoids. The air suspension control module also provides power to front and rear height sensors. The air suspension control module controls vehicle height adjustments by monitoring the two height sensors, vehicle speed, a steering sensor, acceleration input, the door ajar signal, transfer case signals and the brake pedal position (BPP) switch. The air suspension control module also conducts all fail-safe and diagnostic strategies and contains self-test and communication software for testing the vehicle and related components.
The air suspension control module is interchangeable between the RAS and 4WAS system.
The air suspension control module monitors and controls the system through a 32-pin two-way connector. The air suspension control module is keyed so that it cannot be plugged into an incorrect harness. There are two sides of the harness connection to the air suspension control module. Each is uniquely colored and keyed to prevent reversing the connections.

Pressure Relief Valve
The pressure relief valve (PRV) protects the rear air suspension components by venting the system to a specific pressure in the case of a system malfunction. The system will decrease the pressure to an acceptable level to maintain vehicle height. In the normal operation mode with normal system pressure, the PRV is constantly closed and does not have any effect on the system performance or function. The PRV is replaceable without any air lines.
  1. If the concern remains after the inspection, use New Generation STAR (NGS) Tester connected to the data link connector (DLC) to retrieve continuous diagnostic trouble codes (DTCs) and to execute On-Demand Self-Test diagnostics for the air suspension control module.
    • If the On-Demand Self-Test is passed and no DTCs are retrieved, go to the Symptom Chart to continue diagnostics.
    • If DTCs are retrieved, go to Air Suspension Control Module Diagnostic Trouble Code (DTC) Index in this section.
    • If the air suspension control module cannot be accessed by NGS Tester, go to Pinpoint Test A.
Self-Test
Verify that the following conditions are met before running the On-Demand Self-Test.
  • All doors, liftgate, and liftgate glass must be closed.
  • The transmission is in PARK.
  • The BPP switch is not pressed during the test and the parking brake is not set.
  • The accelerator pedal is not pressed during the test.
  • The vehicle is not in 4L mode.
  1. Fulfill the pre-conditions.
  1. Install a battery charger for the On-Demand Self-Test to prevent battery drain.
  1. Run the air suspension On-Demand Self-Test.
  1. Record all listed DTCs.
  1. Retrieve stored DTCs.
  1. Troubleshoot any On-Demand Self-Test DTCs first.
  1. Retest and clear DTCs after repairs.

Apr 13, 2009 | 2000 Ford Expedition

3 Answers

Air suspension motor running


If you have a hole or crack in your airbag the compressor has to work extra hard to try to blow it up (like blowing up a balloon with a hole in it) I would recommend checking out strutmasters.com they have some great kits for the Ninety Eight. There kits will eliminate any problems with the suspension. It is a permanent fix. these convert you from the airbag to a powder coated American made steel coil spring that is guaranteed to last the life of the car. And for a very affordable cost. I added the link below so you can check it out.
http://www.strutmasters.com/oldsmobile-suspension-parts-s/85.htm

Hopefully this will help

Good Luck!!!

Dec 27, 2008 | 1992 Oldsmobile Ninety Eight Regency

3 Answers

Nivomat self- leveling or not.


Automatic self-levelling is standard on the seven-seat models. What model do you have?

Oct 04, 2008 | 1990 Volvo 740

1 Answer

Rear suspension leveling sensor


your leveling sensor will be on the rear suspension it will hook to one of thwe control arms.
you can un hook the arm and push it all the way down and should let air out

Sep 18, 2008 | 1997 Lincoln Continental

2 Answers

Free fixed


Hay
I have a Chevrolet G10 Van Recalls
and recently my water pump getting warm can i have fixed for free

May 14, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lancia Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

718 Answers

yadayada
yadayada

Level 3 Expert

71856 Answers

Sam Akber
Sam Akber

Level 3 Expert

987 Answers

Are you a Lancia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...