Question about Saab 900

1 Answer

We have changed bulbs, checked wiring and everything seems to be working except the brake lights.; i have a saab 900 1992.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Saab Master
  • 17,129 Answers

Use a test lamp or a meter to checck onthe + voltage at the brake lamp. If not present then you must check on the brake light switch mounted on the servo.
You have the +12 available here in the switch to put the lamps on.
Check the ground to the brake lamp bulb inthe harness.
Hope you have also checked the brake light fuse.

Posted on Sep 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 gmc sonoma my brake Lights dont work but everything else does except the right blinker changed bulbs didn't help


Check brake light fuse first. If ok, the brake light switch at the brake pedal may be defective. Try wiggling the switch to see if the brake lights work. If not, disconnect the wiring connecter and if it is just 2 wires cross them over and see if the brake lights come on. If they do, the brake light switch is bad. If wiggling the switch makes the brake lights work, I would suggest a brake light switch as well

Jun 07, 2015 | GMC Cars & Trucks

2 Answers

1989 Saab 900 turbo convertable


Either the ground wire is not working or disconnected or the wiring is short.

Jun 02, 2008 | 1998 Saab 900

1 Answer

Brake lights do not turn on


Sounds like you may need to replace brake bulb terminals they do get wore out were the bulb goes in easy to replace so new terminals easy to splice with wire splice kits don't twist and tape do this with splice kits or you will be always repairing take time do it right

Feb 21, 2013 | 1986 Nissan Pickup 4WD 1986

1 Answer

Tail light is not lighting up in my 2000 ford expedition


brake and turn are the same filament in the bulb. Try a new bulb. if that doesn't work your going to chase a short/ground on that wire back to the switch. get a wiring diagram to help.

Aug 05, 2012 | 2000 Ford Expedition

1 Answer

1999 saab "brake lights"


I guess your break lights aren't working; If the bulbs are good remove the trunk lid liner find the rubber boot that house the wire harness pull the boot and check the wires for break repair if needed. This is a common Saab problem

Sep 16, 2010 | 1999 Saab 9-5

1 Answer

2006 Sonata brake lights don't work except rear deck light.


Check the connection at the brake light switch for power comming out to the barke lights,try feeding power to the brake lights manualy using a jumper wire from your fuse box or battery,unplug the wire from the switch and put power to the harness if everything is OK the brake lights will work,then you need a new switch.

Jul 25, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Left brake light does not work on 7-pin trailer outlet on my 2003 Silverado HD2500. I checked the wiring harness and have no power on the yellow left brake light wire. I checked all the fuses too. I...


I had a problem with my trailer light wiring, everything was working except one light, I used an OHM meter and traced from the socket back to the next joint and found I had a broken wire, I split the factory harness and repaired the wire, you may have the same problem, mine was under the truck left side above the frame

Mar 31, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Brake lights on saab 900 2.3 95 model year


If there is no brake lite switch on the arm of the brake pedal then look to see if there are two wires hanging down with a plug on them, as perhaps the previous owner removed the brake lite switch with the intentions of replacing it and just never got around to it.

Oct 25, 2008 | 1995 Saab 900

1 Answer

Brake lights don't work


it could be a faulty brake switch.

it is located at the brake pedal. the brake pedal itself is the one pushing the brake switch to turn it off. it is a normally closed switch.

tnx 4 using fixya,

drcool

Sep 22, 2008 | 1986 Saab 9000

1 Answer

Breaklights


1st get autozone to clear the code, (free) The only thing I can think of that goes out when car is off and on when lights turn on is the parking lights on the side, the wires could be touching in the conduit, start car and pull brake fuse out, if the lights stay on you have a short, if only the park lights stay on (double filiment) look at the lighting system, but if the brake and driving light stay on, sounds like an ecu problem.

Sep 16, 2008 | 1995 Saab 900

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...