Question about 1997 Mitsubishi Galant

1 Answer

Over drive button is stuck in off position. when pushing button while driving, all lights & power drops. like a short or ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 291 Answers

Common problem wires short near bottom of shifter

Posted on Sep 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Tahoe has short drawing 12 amps


You put amp meter in series with negative cable not positive . c Improved Methods to Find Parasitic Draw Battery Drains Overnight

Your vehicle has a number of control modules onboard - PCM/ECM - BCM - ABS - air bag module . Maybe more ! One of these modules may not be powering down , going to sleep etc... . It doesn't have to be a short . A light could be on too . Using Voltage Drop To Find Key off Battery Drains

Feb 19, 2017 | Chevrolet Tahoe Cars & Trucks

1 Answer

I have a 98 GMC Suburban K2500 3/4 ton 5.7 engine, Auto, 4wd (Push Button) The Transfer case has just had a complete rebuild. I have installed a new dash switch for the 4WD, & also a new Contr


The selector drive mtor mounted on the transfer case had alot of problems with water getting into the circuit board and also the mtoro drive getting stuck. At the dealership I have replaced hundreds of these over the years.

Nov 30, 2014 | 1998 GMC Suburban

1 Answer

My 1994 jeep grand cherokee sunroof is stuck open. Motor doesn't even work when button is switched on. Its going to start raining tonight and I need it closed. Any ideas how to manually shut it?


no
if 12v says at 12.6v key off and 13.3 to 15vd driving , power is good.
so no.
you can take the trim of the sun roof and disconnect linkage, and force it shut , or use bailing wire to keep it shut.

Nov 19, 2013 | Jeep Grand Cherokee Cars & Trucks

1 Answer

How to put in four wheel drive


FOUR-WHEEL DRIVE SYSTEM

(a) Four-wheel drive control

Use the four-wheel drive control lever and center

differential lock button to select the following transfer and

center differential modes.

The "H" and "L" position of the four-wheel drive control lever

provides either lock or unlock mode of the center differential

depending on the center differential lock button position.

Use the center differential lock system if your wheels get stuck

in a ditch, or when you are driving on a slippery or bumpy

surface. When the center differential is locked, the vehicle

stability control system is automatically turned off and the

center differential lock and "VSC OFF" indicator lights come on

because the function that controls engine performance

As soon as the center differential lock switch is turned

on, the "VSC OFF" indicator light comes on. After the

wheels are out of the ditch or off the slippery or bumpy

surface, turn the center differential lock switch off.

Make sure the center differential lock indicator light and

vehicle stability control system off indicator light turn

off.

"H" (high speed position, center differential unlocked):

Lever at "H", center differential lock button left out

Use this for normal driving on all types of roads, from dry

hard-surfaced roads to wet, icy or snow-covered roads. This

position gives greater economy, quietest ride, least wear and

better vehicle control.

"H" (high speed position, center differential locked): Lever

at "H", center differential lock button pushed in

Use this for greater traction when you experience a loss of

power, such as wheel slipping, in the center differential unlock

mode.

"N" (neutral position): Lever at "N"

No power is delivered to the wheels. The vehicle must be

stopped.

"L" (low speed position, center differential unlocked):

Lever at "L", center differential lock button left out

Use this for maximum power and traction. Use this for climbing

or descending steep hills, off-road driving, and hard pulling in

sand or mud.

In this mode, the braking feeling that occurs when the wheels

are negotiating a sharp corner is further reduced than in the "L"

(low position, center differential locked) mode.

"L" (low speed position, center differential locked): Lever

at "L", center differential lock button pushed in

Use this for maximum power and traction. Use this for hard

pulling in situations the vehicle cannot negotiate even in the "L"

(low speed position, center differential unlocked) mode. Also,

using this mode when driving down steep off-road inclines will

help contribute to increased vehicle stability.

https://secure.drivers.lexus.com/lexusdrivers/info/my-lexus/resources/submit-owners-manual-search.do

Please copy and paste the link above and it will take you to the lexus site. There you will find the owners manual and you can download whatever sections you need for free.

Hope this helps.

Feb 11, 2011 | 2004 Lexus GX 470

2 Answers

Cant get out of four wheel drive


If your truck has a dashboard push-button 4x4, then carefully disassemble and clean with Q-tips and alcohol. when 4x4 lights turn off, drive in reverse over 15 feet. Good luck.

Nov 20, 2010 | 1999 GMC Jimmy

1 Answer

1999 gmc sonoma, auto, push button 4wd. jacked the rear wheels off the ground and pushed 4wd button, front drive shaft turns, but no power to front wheels, seems like everything is working like it should,...


Ive gone thru this THREE TIMES w/ my '99! Theres a thin, rubber vacuum hose that wears thin, gets dirt/oil/water in it & shorts a relay. The last mechanic replaced the hose w/ steel brakeline & Ive had no problems for 2 yrs.

Jan 18, 2010 | 1999 GMC Sonoma

3 Answers

My truck is stuck in 4 lo


pull atc 25 amp fuse in underhood fuse center and 10 amp 4wd fuse inside cars fuse box,your problem is in control box behind kick panel on pass. side ,corrosion build up,

Mar 06, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
1997 Mitsubishi Galant Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...