Question about 2000 Dodge Caravan

2 Answers

How to change wipers? - 2000 Dodge Caravan

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 197 Answers

Look to see if instructions are on carton. If you take your auto to a Auto Zone they will probably put them on for you.

Posted on Sep 12, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 40 Answers

Push the lever on the bottom of the plastic on the blade and slip it thru the blade frame do one at a time and try not to crack your windshield, use a towel to rest the wiper arm on the window

Posted on Sep 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 vw jetta wiper still not working after changing the wiper motor and wiper switch ? help


Did you check the fuse? Have power at the plug? could be a bad ground.

Dec 06, 2015 | Evan Cars & Trucks

1 Answer

2008 Ford Explorer Rear windshield wiper and wiper fluid stopped working


sounds like the wiper motor has worn out as was a steady decline , a wiper motor works by "tracks" that conduct the power , over time these wear thin until they no longer transmit the power , change the motor

Sep 22, 2015 | Ford Cars & Trucks

1 Answer

Wipers stuck in up position 09 toyota martix


If wipers do not work at all, and are stuck in one spot, check the fuse to see if it is bad. If wipers work, but stop facing up when you turn them off then the "park" portion of wiper motor has failed. If this is the case (wipers work and park up) then only fix is replace wiper motor. If fuse blown - replace it - and if it blows fairly soon after changing then something is binding wipers, or wiper motor is taking too much power and again, the motor needs changing.

Feb 24, 2015 | Toyota Cars & Trucks

1 Answer

Car does not turn off after changing fuse


car stays, on, does that mean engine will not shut down.
or mean the wipers stay on, after turning them off
1:yes, wiper, bad internal wiper switch, (bad wiper motor)
2: no:?
wiring hacks (after market installs of something gone worn)
bad igniton switch.

Dec 12, 2013 | Acura Integra Cars & Trucks

3 Answers

How to change wiper blades


Here is our install step-by-step guide for a 2003 Lexus ES300
Great Wipers, Great Prices, Step-by-step instructions with Free Shipping. https://www.wiperbladesusa.com/lexus/es300/2003/how-to-change-wiper-blades

Sep 13, 2011 | 2003 Lexus ES 300

1 Answer

Windscreen wipers have a high pitch squeek I changed the wiper blades three times. I changed the windsrceen last week, thinking it was some product in the glass. The high pitch squeek continues


Try to run the wiper motor with the wiper arms removed and thnnotice if it is still squeeking. If it is thn you will have to lubricate the wiper shafts especially where the wiper arm fits.
Hope this helps!

Jan 11, 2010 | 2001 Land Rover Range Rover

2 Answers

How do I remove front wiper blades to replace with new ones on my 2006 nissan quest


How to Replace Wiper Blades Guide:
Potential tools needed to replace wiper blades:
  • Flat blade screwdriver (small)
  • Small nosed pliers
  • Latex or vinyl gloves
  • Safety goggles
To replace wiper blades the actual action of replacing the blade is no big deal, it's the location of the blade down below the hood that can make it difficult though. Sometimes it helps to open the hood to gain access to the wiper blades. Other times it is helpful if the wiper blade is somewhere in the motion line of wiper action. The trick is to get the wiper to stop somewhere in the wiper arc. Turn the wipers to the on position and allow the wipers to start, and then shut the key off when the wiper has arrived in a desirable position on the windshield. To replace your wiper blades please follow the step by step instruction below. Also, watch the How to replace wiper blades video below to gain additional information. The method in which the wiper blades are attached will vary slightly.
  • Step 1: With the hood closed, turn the wipers on, when the wipers are in the middle of their arc turn the key to the off position. (Note: if this can't be done because of wiper condition and you want to avoid scratching the windshield please open your hood to gain access)
  • Step 2: Locate the mounting clips at the top pivot on the wiper blade
  • Step 3: Release the clip and remove the wiper arm
  • Step 4: Match the size of the old blade against the new blade to ensure proper fit and operation
  • Step 5: Reinstall the new wiper blade and recheck wiper operation

Common Problems:
  • Make sure the wiper blades are the same size as the original blades.
  • When replacing wiper blades not getting the blade on the mounting pin completely allowing the wiper arm to become dislodged and possibly causing damage to the windshield.
  • Using wiper blades after the blade has failed permanently damaging the windshield by craving scratches in the wiper arc.
  • Wiper blade can create a chattering noise when the blade is not properly balanced allowing the blade to "flop" back and forth as the wiper direction changes.

I hope help you with this (remember rated this help) Good luck.

Sep 14, 2009 | 2006 Nissan Quest

1 Answer

Change wiper arm on 95 camaro


lift the arm, disengag the retainer tab at wiper arm on drive post and lift wiggle off wiper arm.

Jun 23, 2009 | 1995 Chevrolet Camaro

1 Answer

Wipers


If your just changing the wiper blades, turn the wipers on and when they get to the top, take the key out. They dont move back much but its enough to change them. If you want to take the arms off, lift the hood up and use a 13mm socket or wrench to loosen the nut and then wiggle the arm off. If you need to change the motor, unclip the black molding that the wiper arms are on and you have full access to the motor.

Apr 16, 2009 | 2000 Chevrolet Malibu

Not finding what you are looking for?
2000 Dodge Caravan Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...