Question about Chevrolet Suburban 1500

2 Answers

1996 chevy suburban ignition tumbler will not turn

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i fix this problem with the key not turning the tags need to be replaced and the car needs to be moved but the key will not turn its not the wheel, but the battery is dead could that be it?

Posted on May 20, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 66 Answers

Is it not turning to start or won't turn back to lock?

I had that problem on a '97 S10 and it was a loss of accessory power. That locked the switch where it wouldn't turn off.

Anything wierd happen on the car or any recent repair work?

Posted on Sep 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2004 Chevy Suburban 1500 with 103,000 miles. I am having problems when starting. When the key is turned, the engine will turn over but not start. Turn the key back to off and re-start and the...


Check for power out of the ignition switch. It sounds like the ignition switch is not engaging on the first try and its taking that second turn to get power from the switch to the ECU and so forth. I would replace the switch and possibly the tumbler if the key comes out while the vehicle is running.

Jun 21, 2011 | 2004 Chevrolet Suburban

1 Answer

1995 C220: Cannot get ignition to turn to on to start car. Steering wheel lock is not the problem. Key just will not turn. Any suggested solutions?


check the key itself if the blade is worn out then it won't push back all the tumbler keys not allowing the tumbler to turn. try a newer key and replace the ignition tumbler asap..

Sep 16, 2010 | 1996 Mercedes-Benz C-Class

1 Answer

1996 Nissan 200SX Manual. Ignition Lock Assembly


You have solved your own problem. I have replace many of these units. It is much simpler to carry and extra key than to screw arround with the old lock assembly. Keys and tumblers ware out like everything else. Let me know if I can help[

Jun 19, 2010 | 1996 Nissan 200SX

2 Answers

03 chevy monte carlo can't turn key


Tumblers are going bad. Get a locksmith or dealer to replace.

Apr 15, 2010 | 2003 Chevrolet Monte Carlo

1 Answer

95 suburban, ignition locks, can't turn key,


Remove the lower steering column cover and check to see if the rod from the ign. lock and tumbler to the ignition switch is binding up. If it's ok, you're problem may be the bearing under the steering wheel being broken.

Mar 29, 2010 | 1995 GMC Suburban

1 Answer

Key tumbler loose. Starts car but wont turn off


most likely its the ignition cylnder (tumbler)

Nov 13, 2009 | 1996 Ford Taurus

1 Answer

Ignition switch will not turn off


Your ignition switch has piled up. Not the key and tumbler, the actual switch which is down at the bottom of your steering column. A rod that is connected to your key and tumbler pulls on the switch to start and stop your engine. You'll have to drop your steering column down to get at it, and replace the switch.

May 04, 2009 | 1991 Chevrolet Suburban

1 Answer

Sticking ignition switch on 2004 Suburban??


you need to replace the tumbler but first you can try a new key if you do not think its the tumbler set key could just be worn but more and likely not .the tumble is shot not too bad to change .

Mar 03, 2009 | 1996 Chevrolet Suburban

1 Answer

Ford taurus 1996


Place key in ign. lock n tumbler and turn to "on" position. Under the column you'll see a small hole to put a small screwdriver or rod into and press it in. While you're pressing it, pull the lock n tumbler out. Installation is the reverse of removal but without the use of the rod. Just push the lock n tumbler in the hole and turn key to lock position and pull key out.

Jul 28, 2008 | 1996 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...