Question about 2000 Ford Crown Victoria

1 Answer

I locked my keys in the trunk of my 2000 crown victoria. How can I get them out? HELP PLEASE!!!

Posted by on

  • cheap repair Sep 12, 2010

    pay a locksmith to pick the lock. AAA might help if you are a member

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 61 Answers

The trunk release button will do the job. If the ignition needs to be on for the trunk button to engage then you can take the panel off and there should be an alternate harness that you can swap with the one that is currently on the switch and that will allow the switch to engage without the ignition on. If you don't have access to your vehicle you will have to contact a taxi company or a tow truck company and ask if they provide a lock out service. Taxicabs offer a cheaper service in my area.

Posted on Feb 23, 2011

  • Matthew Lepine
    Matthew Lepine Feb 23, 2011

    Forgot to add, if there isnt another harness behind the panel then just jump the purple wire with a power wire from another power source.

  • cambronamand
    cambronamand Feb 23, 2013

    hey matthew what panel are u talking about my husband did the same thing and our trunk button wont work without being turned over we have a 1986 crown vic

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 ford crown Victoria. Have water on the rear passenger side floor. What could be the problem


Hey Grady..
There are few things that could cause the water intrusion... Is the carpet in the front floorboard wet?.. ..Has it rained recently? This will rule out window seals leaking? Have you opened the trunk and checked to see if water is in the trunk? OK..IF it has not rained, no water in the trunk, AND the front floorboards are wet, then the heater core is leaking...
Do It Yourself and DIY Auto Repair by ChiltonDIY
Free Automotive User Manuals ManualsOnline com
https://haynes.com/en-us/search?query=2000%20Ford%20Crown%20Victoria

Grady.. sounds like its either the window seals or the door seals.. check for damaged door seals, cracked window seals..

Jul 03, 2017 | 2000 Ford Crown Victoria

1 Answer

Need to get into my trunk trunk release button locked a nd can't find key


get hammer and flat head screwdriver hit it in and turn or fork

Jan 08, 2012 | 1998 Ford Crown Victoria

1 Answer

I have a 2000 crown victoria and whn i turn the key it does everything but fire it cranks but still wont start chnaged the starter,altanator, just not sure whats next


The next thing I would check is to make sure the fuel pump inertia switch isn't tripped. It's located in the trunk, on the side. You should see a little hole. Looking inside, you'll see a button that faces up. Push down on it. If it clicks down, chances are, you found your problem. This switch is used as a fuel pump cutoff in the event of a collision, so fuel doesn't feed a potential engine fire.

I hope this helps! :)

Mar 24, 2010 | 2000 Ford Crown Victoria

1 Answer

Where dose the CD changer go to be installed when vehicle is bought used and it's missing? 2000 Crown Victoria Special Edition Need location and image. Part#?


Inside trunk on the left side. The control box is behind that panel. The wire harness is a dealer item only and not cheap. As for the changer itself you can usually find them on ebay.

Sep 21, 2009 | 2000 Ford Crown Victoria

1 Answer

I need to get my 97' Crown victoria trunk open from the inside.


There should be a safety trunk release located on the upper rear window deck platform- a black handpull . If it is still intact- it should pop the trunk lid.

May 27, 2009 | 1997 Ford Crown Victoria

1 Answer

Remote Trunk Button Non-functional


one remote is for valets,one is for the owner

Apr 21, 2017 | 1999 Ford Crown Victoria

Not finding what you are looking for?
2000 Ford Crown Victoria Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...