Question about 1992 Mercury Sable

1 Answer

I am told my 1992 Mercury Sable now needs another part: Integrated Control Relay Module. How much does this part cost? What more can I say? The car has been giving me a lot of trouble. First it need a rebuilt transmission. It kept STALLING even after this major repair. In June a new fuel pump was installed. Last week it stalled AGAIN. how much is the part they are now telling me they need to back order? It is as stated above INTEGRATED CONTROL RELAY MODULE. I will be without transportation FOR A WHOLE MONTH

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 613 Answers

Before i changed that i would change the fuel filter it sounds like this is your problem and there tryin to upsale you this fuel filter like 20 bucks takes about a hour to do very easy hope this helps when filter gets clogged particles float around in filter and randomly block flow hole hope this helps

Posted on Sep 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mercury Sable 2003 check engine light is on but no code. Car dies at stop when AC is on.


Look at the automatic Idle control module first then the engine control module.

Sep 25, 2016 | 2003 Mercury Sable GS

1 Answer

How do I take out the air bag and replace it with another one for my 1992 mercury sable?


You don't. .take it to a reputable garage and let them repair it.if you just install a new air bag without replacing crash sensors, clockspring, air bag module and safing sensor, you may deploy the new air bag,possiably causing major bodily harm. ..stay away from it!!! A static shock from you connecting it could set of air bag..

Mar 04, 2014 | 1992 Mercury Sable

1 Answer

Windshield wipers won't work. It is not the motor, multi-function control switch, or the circuit breaker. Could it be the relay module, and if so, how do I get to it?


Ford likes putting these behind the glove box. you can lower the box by pushing up on the tab at the top, center of the box. There could be two modules there. the smaller one is the wiper control module.

Feb 13, 2011 | 1992 Mercury Sable

2 Answers

1995 mercury sable....what is the cause of the fan not working


possible causes, fan motor, fan relay, on no power in that circuit

Sep 30, 2010 | 1995 Mercury Sable

2 Answers

Where is the ignition control module located on a 1995 mercury sable 3.0 v6


For 1995 Mercury Sable 3.0L EFI 6cyl the Control Module-Ignition is located: Under hood, center, upper engine area, mounted on side of distributor.

Hope helps (remember rated this).

Aug 11, 2010 | 1995 Mercury Sable

1 Answer

1992 Mercury Sable - Windshield wipers will not operate. Where is the wiper control module, what does it look like, and how do I access it? If possible, please detail components requiring removal to...


i think you need the repairing manual to solve your problem you can get the manual from the given link http://toolsnyou.com/ this link is very safe and helpful i had already this link to solve problem i was facing and it works

Aug 25, 2017 | 1992 Mercury Sable

2 Answers

Where is the fuel pump relay for 92 ford topaz located


Fuel Pump Relay: Locations
The fuel pump relay is an integral part of the Integrated Relay Control Module (IRCM). The IRCM is mounted under the hood, on the driver's strut
tower.

Nov 12, 2009 | 1992 Mercury Topaz

1 Answer

Our 1992 Mercury Sable after warming up it shuts right down. We have replaced the fuel pump and filter along with the control module and the coil is fine. We also replaced the distributor gear shaft. What...


It would appear that you've got a major vacuum leak. Listen under the hood for a loud hissing sound. Also have someone else shut down the engine while you listen, this will allow you to hear any major leak for the vacuum lasts about 2-3 seconds while the engine is slowing to a stop.Happy hunting! Dana

Oct 07, 2009 | 1992 Mercury Sable

Not finding what you are looking for?
1992 Mercury Sable Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

fordexpert

Level 3 Expert

5613 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...