Question about 2004 Pontiac Grand Am

1 Answer

Abs brAkes and track off light on - 2004 Pontiac Grand Am

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 678 Answers

The ABS computer will have to be scanned to determine where the fault lies. When there is a problem in the ABS system the computer turns off the traction control system as well. The traction control system is essentially a function of the ABS system, when the abs doesn't work the traction control can't either. Based on past experiences my guess is you will find a wheel speed sensor fault code. They are fairly common failure items in GM models around those years. The sensors are built into the hub and bearing assembly and will likely run around $300 to replace.

Posted on Sep 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do fix C1998 code on 04 expedition abs


anytime you open a brake system you should bleed the back furtherst away first then the work forward , easy

Dec 02, 2014 | 2004 Ford Expedition

1 Answer

Speedometer stops working all the lights on dash are on brake and abs


Most likely a failed "vehicle speed sensor", have ECM codes pulled to verify.

Feb 01, 2014 | 2007 Nissan Quest 3.5 Minivan

2 Answers

2001 Carerra brake pushes back!


ABS Braking System being activated for some reason

Nov 26, 2012 | 2001 Porsche 911 Carrera

1 Answer

Advance tracking system turning off and abs light is on


You need to get the brakes checked. The brakes ABS warning is a fairly accurate system and it probably is made to shut off the tracking system because without brakes, the tracking system can not work properly.
The tracking system and ABS work by counting the revolutions to the wheels and balance left and right sides by using the brakes. If brake debris or bad brake pads interfere with the counting, the warning will engage.
You may be able to save the rotors with prompt action, but know that the brakes are not within specifications and are headed for a metal to metal conflict.

Mar 30, 2012 | 2005 Ford Explorer

1 Answer

The ABS and Track lights will not go off. I have


i would check wheel bearings as the sensors for the abs are built in if one is bad it will cause the light to stay on once replaced the lights go out

Apr 30, 2010 | 2004 Pontiac Grand Prix

1 Answer

I hace an 99 alero NS MY OFF TRACK AND MY ANIT


MOST OF THE TIME WHEN TRAC LIGHT AND ABS BRAKE LIGHT COMES ON YOU A HAVE A PROBLEM IN THE ABS AND TRAC SYSTEM.THIS IS A DEALERSHIP FIX. YOU CAN CHECK ABS BRAKE FUSES MAKE SURE IT IS IN TIGHT.AND CHECK FOR FAULTY ABS RELAYS.TO CHECK RELAY LOOK AT RELAY TERMINALS YOU HAVE TERMINAL 86 AND TERMINAL 85.YOU CONNECT TERMINAL 85 TO GROUND AND TERMINAL 86 TO BATTERY POSITIVE TERMINAL.IF RELAY CLICKS WHEN BATTERY VOLTAGE IS APPLIED.RELAY IS WORKING IF YOU HEAR NO CLICK RELAY NO GOOD NEEDS REPLACING.

Apr 12, 2010 | 1999 Oldsmobile Alero

1 Answer

Abs light stays on all the time and says track off on my 2oo1 pt cruiser the brakes are working fine i have just had all new brake pads cuold this have something to do with it


was the brake light on b4 brake job? and did you do the brake job or a shop.....if the abs light wasnt on b4 brake job thenwhen the pistons on the caliper where pushed back it screwed the abs pump...if it was on b4 brake job i would look in to a abs sensor on the wheel bearings

Mar 04, 2010 | 2002 Chrysler PT Cruiser

1 Answer

My lights stay on all the time abs, brake and track control


It sounds like you have a faulty ABCM or anti-lock braking control mechanism. 2003 was a common year for failure of this. Usually your car will drive just fine, however, your ABS and traction control might not work as well as there supposed too in a collision.

May 28, 2009 | 2003 Cadillac Deville

1 Answer

98' Ford Windstar has a spongy brake


Have you had anyone try to clean and adjust the rear brakes? You will need a shop to scan the van for ABS codes first to cure the ABS light.

Mar 02, 2009 | 1996 Ford Windstar

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

815 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...