Question about 1994 Mazda 323

Open Question

How to install a new front Sway bar on a Mazda Astina 1992.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2039 Answers

SOURCE: 2000 dodge caravan right front sway bar broke off

you simply reove the old link change them with new on its not very expensive and i suject you to change the bushing that hold the barr in place change all those part and you get ride of all the rattling noise you had good luck pierre

Posted on Mar 09, 2009

moparownr
  • 667 Answers

SOURCE: To replace front sway bar links

end links are straight forward, remove the old and install the new, sometimes you have some trouble if the ball end spins while removing the nut, look at the nut side of the joint and there is a hex key hole in the center to hold the joint still while removing the nut

Posted on Mar 31, 2009

goalie39
  • 469 Answers

SOURCE: The Speedometer and the Odometer in my Mazda

Check the fuse panel, many of the new Speedos and tachs are digital and rely on signals from the engine and transmission. check fuses related to the instrument panel or gauges.

Posted on Apr 13, 2009

  • 100 Answers

SOURCE: 1989 mazda astina 323 5 spd manual clutch fluid??

Check the brake fluid resovoir, on the side there could be a hose coming off it part way down the side sharing the brake fluid to the clutch master cylinder

Posted on Sep 09, 2009

  • 3 Answers

SOURCE: replace sway bar end links '97 GMC Sierra

if you put your vehicle information in at advanceautoparts.comyou can search sway bar and find parts that you need - there was someinfo missing on which sierra model you have as far as engine size andvin # match but I came to: http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/partlist_Sway-Bar-Link-Kit_78_R|GRPCHASAMS__sway%20bar___

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i locate the flasher unit in a 1992 mazda astina hatch modelBG


This is normally under the dash on the drivers side. If you have the replacement part in hand it will help you identify it.

Jan 25, 2016 | 1992 Mazda 323

1 Answer

In a mazda 5 there is clunking noice in the front wheel area of the car when you hit a small bump


Add new bilstein shocks, change the sway bar bushings, replace tires to 215/50-17 and you'll have a descent ride.

Oct 05, 2011 | 2009 Mazda MAZDA5

1 Answer

2005 dakota replacing front sway bar no replace ment part diagram


7585000029_large.jpg Sway bars are installed by removing your factory end links and sway bar. Re-install the new bushings and position your new sway bar on the vehicle in the OEM location and secure it with the same bolts.

Jun 03, 2011 | 2005 Dodge Dakota

2 Answers

I recently purchased a 99 Mazda Protege. I live in VA so I went to get it inspected and it failed because it seems someone has cut the sway bar in the front and completely removed the one that is in the...


i think i would take my vehicle to a difrent shop
if dealer ship says no swaybar go with them
they have the complete pedigree on that unit
and if one was available they could order for you
yes it is needed it is part of the suspension but 1060$$$$$ is alot of coin
get second opinion and price at difrent shop

Apr 04, 2011 | 1999 Mazda Protege

2 Answers

Replacing sway bar. cannot get new sway bar to propper position. how do i get it to fit propperly?


Your old sway bar made of tubular steel. New sway bar made from solid steel. You have a frame under engine the sway bar attaches too. This frame also supports your engine and trans mounts. Follow frame and there are 4 bolts securing same. Mechanic I watched supported engine underneath. Loosen back bolts though not removed. (please note sway bar has arrow that bar can only go in one direction) This maybe your problem. Attach bar to frame and fitting's. Best if you raise front end and remove both tires. Good luck

Feb 15, 2010 | 1999 Pontiac Grand Prix

1 Answer

Front sway bar link kit, what is the order of installation. all my bushings are rotted away.


Remove the sway bar links from lower control arms. Replace the sway bar mount to frame bushings first. Then install sway bar link bushings. Note how they come apart and install in the same manner.

Dec 12, 2009 | 1999 Ford Expedition

3 Answers

Front end shakes at 50mph, possible stabalizer bar,


Do a replacement. There is no way to adjust the bar.

Aug 24, 2009 | 2006 Jeep Wrangler

1 Answer

The Speedometer and the Odometer in my Mazda Astina SP 1992 has stoped working (i think at the same time). How should I go about fixing it?


Check the fuse panel, many of the new Speedos and tachs are digital and rely on signals from the engine and transmission. check fuses related to the instrument panel or gauges.

Apr 13, 2009 | 1994 Mazda 323

Not finding what you are looking for?
1994 Mazda 323 Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...