Question about 1999 Plymouth Breeze

1 Answer

Can someone provide me with instructions on how to get the stereo out of my 1999 Plymouth Breeze? I have removed the bolts I can see after remove the face plate but it's still not budging.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, there is a black lining surrounding the stereo, and it pops off pretty easily, use a flat head screwdriver and gently pop out the black trim. The two bolts securing the radio unit are easily accessable. Unscrew the two bolts and pull off the stereo

Posted on Sep 11, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to remove exhaust manifold on 1999 plymouth breeze

which engine?
remove all bolts and bam, i's off.
only rust makes it hard, ever do rusty bolts?

May 14, 2014 | Cars & Trucks

1 Answer

Upper control arm removeal

take out the strut remove it from the top, 3 nuts located under the hood also may have to remove the lower arm first as well many of the modern cars require removing more parts to access the desired part this is part of the reason mechanics have to charge you so much now days

Apr 14, 2013 | 1999 Plymouth Breeze

1 Answer

Where is the battery located in a Plymouth breeze and how do u get to it so that I cam change it? Please help very cold out,thank you......

To get to the battery on a 99 Breeze, turn the wheel as far as you can to the left. In front of the tire in the wheel-well is a plastic cover with 5 tabs across the top and side. Turn these 1/4 turn to the left, and the panel pulls off. Use a 1/2 inch socket to remove the battery mount/hold down. It would be best to remove the top bolt first. Then use a 5/16 inch socket to remove the front mount battery cables, and the battery will slide right out. You may have to lift the car a bit to get the battery out.

Jan 14, 2012 | 1999 Plymouth Breeze

1 Answer

How do I change a alternador in my 1999 plymoth Breeze 2.0

1 remove battery cables from battery 2 disconnect wires from alternator 3 loosen belt with the belt tensioner it will probly take a 3/8 drive ratchet to loosen the tensioner by putting the end that normaly goes into socket into a square hole in tensioner( just move tensioner far enough to slip belt off alternator pully) 4 remove bolts from alternator 5 put new alternator in place and put bolts in 6 put belt back over pulley 7 plug wires back on alternator 8 reconnect battery

Oct 01, 2011 | 1999 Plymouth Breeze

2 Answers

How do you access the radiator on a 2000 plymouth breeze? where is the radiator located ?


Jul 25, 2011 | 1999 Plymouth Breeze

1 Answer

How do I change the starter on a 1999 Plymouth Breeze with a 2.0L engine?

most starters have only two mounting bolts,i recommend disconnecting your negative battery terminal,remove the mounting bolts diconnect the solenoid wires

Jun 21, 2010 | 1999 Plymouth Breeze

1 Answer

How do i get to my turn signal bulbs in 1999 plymouth breeze

open trunk and remove cover inside rear. Some just pull out, others may have a few screws.

Oct 25, 2009 | 1999 Plymouth Breeze

1 Answer

Where is the thermostat located and how do you change it?

Open the radiator cap. The thermostat in down inside about 2 inches. You may need drain some fluid off to see it. You will have to remove the radiator cap holder, - 2 bolts to remove it. Install new unit with new gasket.

May 09, 2009 | 1999 Plymouth Breeze

1 Answer

Programming a keyless remote for a 1998 Plymouth Breeze

Most eBay sellers that deal with key fobs will provide programming instructions...ask the seller before you buy from them.

Mar 31, 2009 | 1998 Plymouth Breeze

1 Answer

How do you remove the starter from a 1999 Plymouth Breeze

On a 2.0 unhook the wires from the back of the starter then there are 2 bolts that go through the nose cone of the starter into the block, you remove those 2 bolts and the starter will fall out.

Feb 18, 2009 | 1998 Plymouth Breeze

Not finding what you are looking for?
1999 Plymouth Breeze Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides