Question about Dodge Ram 1500

1 Answer

1998 dodge 1500 5.9 L # 2 cylinder is misfiring

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,763 Answers

This can be a few things first try switching the plug to see if the misfire moves with the plug, if it does then bad plug. next if it doesnt move then go to sparkplug wire and do the same, most of the time its tune up related but if moving wire doesnt change misfire then the next step is compression test to make sure you have compression in that cylinder, if compression is good then the next step is move the injector and see if misfire follows, this is a good way to diagnose without spending money thats not needed to be spent, so start with these test its got tobe one of these things. hope this helps.

Posted on Sep 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

04 DODGE Ram hemi cylinder 3 misfire


Check engine compression and compare. then test running engine compression most engines have about 130-170 cranking compression and about 90-110 running compression. OR bring that cylinder to its Top Dead Center compression stroke apply air to the cylinder and check to see where the air is going open throttle plate bad intake valve, from exhaust pipe bad exhaust valve, from oil cap piston rings.

Mar 23, 2014 | 2004 Dodge Ram 1500

2 Answers

1998 DODGE RAM 1500 4x4 360 ENGINE CODE SHOWS MANY MISFIRES THOUGHT WAS BAD GAS HAVE DRAINED AND REPLACED, RUNNING EXTREMELY RICH ON RIGHT SIDE, O2 SENSORS SHOW TO BE WORKING WHAT ELSE CAN I CHECK ON THIS


I had a similar problem with my Dodge truck.I replaced the cap, rotor, plugs and wires and the check engine light went out. Within 4 days the light came back on with codes for multiple misfires..To make a long story short, I put electrical tape on the wires to adjacent cylinders and the problem was solved. Answer; The pluig wires they are making for Dodge are really cheap!

Sep 08, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

I need teh cylinder diagram for dodge ram 1500


You didn't mention engine size, so i have included diagrams for all 3 available engines...


f31070a.jpg


9108e8d.jpg

4be1d7a.jpg

Feb 16, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

1998 ram 1500 5.9 gas rough idle,hissing sound from air filter,missfires after each start for 2-3 minutes every time.if driving need tap gas pedal to make it run,on idle sometimes stalls,no dtc codes at...


SHOWING MISFIRES ON SCAN TOOL?IF NOT,ENGINE CONTROLLER HAS NOT LEARNED MISFIRE MONITOR..WILL HAVE TO BE DRIVEN A BIT FOR RELEARN..IF YOU CAN SEE MISFIRES..MISFIRING ON MORE THAN 1 OR ALL CYLINDERS?CHECK UNDERSIDE OF IGNITION COIL FOR CRACKS..IF NOT CRACKED,YOU MAY HAVE A FAULTY CRANK SENSOR..ANY CORRODED PLUG WIRES AT DISTRIBUTOR CAP?ALSO CHECK IF ANY OIL PRESENT IN INTAKE MANIFOLD..GASKET ON BOTTOM OF INTAKE MAY BE BROKEN CAUSING AN INTERNAL VACUUM LEAK

Jun 15, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Getting 301 and 307 codes


CYLINDER #1 & #7 MISFIRE DETECTED.

May 12, 2009 | 1998 Dodge Ram 1500 4WD

2 Answers

2005 dodge ram 1500 4.7 misfire cylinder 2 52,000 miles


have a miss fire in 3 and 5 cylinder on a 2005 Ram 1500 4.7 have relpaced coli packs and still does it have a knock in upper engine around miss fire cylinders. what else can i do

Apr 29, 2009 | 2004 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...