Question about 1994 Oldsmobile Cutlass Ciera

Open Question

How to replace 1994 oldsmobile cutlass ciera starter? I have it disconneccted but cannot get old one out to put new one in - seems stuck on something

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: The windows in the 95 oldsmobile cutlass ciera won't work at all

maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.

Posted on Jan 20, 2009

Ad
  • 548 Answers

SOURCE: 1991 oldsmobile cutlass Location of starter

Follow the red wire from the battery towards the firewall. It will end at the starter.

Posted on Feb 06, 2009

  • 1118 Answers

SOURCE: symptoms of a failing (plugged) fuel filter - GM V6 Olds Cierra

Rought idel, stalls alot, poor excelaration, starts hard, playing with gas peddel to keep running, they are also symptoms of fuel pump getting weak, or going out, should have fuel pressure test.

Posted on Feb 14, 2009

  • 14036 Answers

SOURCE: Changing spark plugs on a 1995 Oldsmobile Cutlass Ciera

ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.

Posted on Aug 17, 2009

Testimonial: "Thank you very much for your advice and time!"

  • 35 Answers

SOURCE: My 1991 oldsmobile cutlass ciera won't start.

check to see if any spark on a plug from either cylinder if you do then check for fuel if no spark and lots of gas the tips of your plugs will be wet so you then know you got a coil or module problem or if no gas could be a relay or fuel pump just have to check it out .

Posted on Mar 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 olds cutlass ciera. I have replaced the battery, new cables, altenator, starter, and I have a re-current problem of turning the ignition and I get a click, and then finally it starts.


The click is the solenoid not getting enough power to energise the starter and engage the pinion gear. Either the battery is weak or the connections going in the starter circuit have excessive resistance and need to be tightened/cleaned.

Feb 24, 2017 | 1994 Oldsmobile Cutlass Ciera

1 Answer

1994 Olds Cutlass Ciera starter issues


You should have two or three wires that go to the large post on the solenoid, including the 4 gauge wire from the battery. Then one 16 gauge wire to the small post. That wire comes from the key switch.
Let me know if you need colors for wires.

Mar 01, 2013 | 1994 Oldsmobile Cutlass Ciera

1 Answer

How do I change the starter on a 1994 oldsmobile Cutlass Ciera


Since its right there at the front of the motor, you really only need a simple ratchet and appropriate sized socket or box wrench to get it loose, but you want to make sure that you label the wires as to remember which terminals they go on;if not reattached correctly, there will be electrical problems with gauges and overall car operations...

Jun 23, 2012 | 1994 Oldsmobile Cutlass Ciera

2 Answers

Do you know where the 2 bolts are on a starter for a 94 olds cutlass ciera s?


REMOVE THE STARTER FLY WHEEL COVER. STARTER BOLTS IS VERTICAL BOLTED INTO THE ENGINE.

Jul 08, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Having problems finding bolts on starter of 1994 Cutlass Ciera S to do a replacement.


they are on the bottom of starter but you will most likely have to drop the exaust to get to them

Jul 08, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

We are replacing the starter solenoid on our 1994 Oldsmobile Cutlass Ciara. When putting the new one on the car acts like it wants to start. What do we do?


Hello! Check your wiring...If +12 volts is connected to the "S" lead the starter motor will run...Lets check the wiring...
The "M" lead connects the solenoid to the motor...The "B" lead is the main +12 volts from the battery (Black Cable)...And the "S" lead is the smaller gauge Purple wire which is controlled by the ignition switch...If the Purple wire is making contact with the Black Cable the starter will run...

Guru................Saailer

Jul 02, 2010 | 1994 Oldsmobile Cutlass Ciera

2 Answers

Where are the starter bolts located? 1994 Olds Ciera S w/v6


Should be between the radiator and engine, underneath the car. There might be a plastic cover held on with 10mm bolts. The starter bolts go up thru the starter, into the block.

May 06, 2010 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Ignition lock 1994 cutlass ciera


You need a new ignition lock cylinder. One of the tumblers inside probably broke.

Aug 04, 2009 | 1994 Oldsmobile Cutlass Ciera

1 Answer

1994 old cutlass ciera 3100 blown head gasket.


Get a Chilton's book on the car. It will take you thru the whole job, and give you the torque specs for putting it back together. You will need a torque wrench, foot pounds, and a good socket set.

May 04, 2009 | 1994 Oldsmobile Cutlass Ciera

2 Answers

How do I change out headlight bulb on 91 olds cutlass cierra


Behind the headlight, you should see the nylon bulb holder. Turn it counter clockwise, about a 1/4 turn, and it should come out. Pull the old bulb straight out, and replace it with the new one. Don't touch the glass part of the new bulb with bare fingers, or you'll be replacing it again. Use cotton gloves or a paper towel. Put the holder back in the headlight, turn it clockwise until it locks.

Mar 09, 2009 | 1991 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1994 Oldsmobile Cutlass Ciera Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...