Question about 2008 Mitsubishi Lancer

Open Question

An error DC message appears on my radio i have an 08 lancer they said it was a speaker box but i have no idea what that is

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5370 Answers

SOURCE: MY LANCER GTS 2008 READ IN THE RADIO ERROR DC.

The "DC Error" message points to a problem with the power supply, and the root cause is most likely to be a shorted or grounded speaker wire. ---------- Also check your car battery too.In some cases, not in all, but in some cases weak battery caused this error. --------- Also click this link for more help:--- http://technoanswers.blogspot.com/2011/06/radio-error-dc-on-lancer-gts-2008.html ---------- This should help.Thanks.Helpmech.

Posted on Jun 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix codes u0141, u1110, u110e on '09 jeep wrangler?


so is car driving perfectly? (other shoe drops)??????
just dash errors, ONLY?

i have a 08 and FULL FSM.
(book and CD)
first off each failure , needs further testing, that is what a ASE tech went to school for 3 years to learn.
here is the list.
1000 codes, I have them in a folder, (extracted with great pain)
141 lost comms with TIPM
1110, lost vehicle speed message.
110e lost ambient temp , message.

the prime DTC error here is 141, lost comes.
once comms are lost there will be lots of related DTC errors.
now to fix that , you need to go to the dealer,
his scan tool an delve deeper here.
Luck happens?
one trick, is to disconnect battery , unplug the TIPM , 5min more more.
then put battery back but (neg battery lug) but this will brick the radio and NAV options, lost radio codes,
we a pro does is get (all this is in the FSM if you read it)
and gets the radio codes and nav codes first.
on a new car its in the glove box, if lost all this is a Royal PITA.

so did you lose your codes.? the card?
my 08 has the cheap radio, with no codes. but the other 4 opted radios do... so....

my jeep has 11 computers, all 11 talk back and forth
some talk all the time to the master. (BCM , PCM and TIPM?)
(CAN-BUS 101) And any master (can be 2 masters) if any fails to here others talking and was expected, it sets a COMM error.

Jul 17, 2014 | 2009 Jeep Wrangler Unlimited X

1 Answer

How do you replace the top upper left speaker?


The radio section of '08 shop manual I am working with appaers to show that the speaker can lifted out of the dash from above. When there is no speaker, there is a plug in the hole that lifts out. Likewise it appears that the speaker lifts out. You may need to use a soft thin wooden stick to remove a "garnish" that covers the speaker cone, but then it is implied that the speaker would similarly lift out from the edge. That is the best I can offer.

Jul 02, 2014 | 2008 Chrysler Sebring Convertible

1 Answer

Left speaker in lancer not working


test the speaker.
connect a 1.5vdc battery to it, (yes, unplugged)
does click? then its good enough to make noise.
use a test speaker at the connector, that works.?
if not the radio is bad or the wire are cut.
to prove that, connect a speaker directly to the radio left pin.
works , good radio.
i cut the line at the radio as soon as the speaker tests good
because grounded out (shorted) lines blow radio amps to smithereens.
can pull the radio first. then bench test it.
its super easy with one test speaker . and a 12v power source.
but be careful many radios brick (shows, enter code) if you pull it.

get your radio code first and this solves this issue.
many radios kill audio only bricked, left and right channels.
but tunes ok .



Jun 18, 2014 | 2011 Mitsubishi Lancer

2 Answers

No sound from speakers


Possibilities are:
Disconnected cables
Fuse
Short cut from radio to the speakers
You may have to take the radio off and look and see and if is not it, you have to test the speakers as well the lines one by one with a tester

Dec 19, 2013 | 2010 Volkswagen CC

1 Answer

Where is the fuse for the cigarette lighter on a 08 mitsubishi lancer


have a check n the fuse box under right hand side of the dash the fuse box cover will have a diagram to where the fuses are

Nov 03, 2013 | 2002 Mitsubishi Lancer

1 Answer

Hi, im searching for the stereo wiring chart for my mitsubishi lancer 2002 GLXI. i have searched for it but the colours are completely different to what i have. For example the colours i have are - Blue/...


This is all I could find. Hope it helps.


WIRE COLOR POLARITY LOCATION
Battery RED/BLACK (+) RADIO HARNESS
Accesory BLUE (+) RADIO HARNESS
Ground BLACK (-) RADIO HARNESS
Illumination GREEN/WHITE (+) RADIO HARNESS
Power Antenna YELLOW (+) RADIO HARNESS
LF Speaker (+) WHITE/BLUE
LF Speaker (-) BLACK/BLUE
RF Speaker (+) WHITE/RED
RF Speaker (-) BLACK/RED
LR Speaker (+) YELLOW/BLUE
LR Speaker (-) GRAY/BLUE
RR Speaker (+) YELLOW/RED
RR Speaker (-) GRAY/RED

Apr 14, 2011 | 2002 Mitsubishi Lancer

1 Answer

I have a 2008 mitsubishi lancer, the am radio stopped work after 2 years does anyone know what the problem could be


Same problem with mine just today.
AM Radio not working anymore.
Any idea of what might it be ?

Nov 11, 2010 | 2008 Mitsubishi Lancer GTS CVT Sedan

1 Answer

Error DC UP comes on dash, radio will not play, put


Can't say what the problem is, but mine has the same condition!
ERROR DC

Nov 27, 2009 | 2008 Mitsubishi Lancer

1 Answer

I hae a 2002 mitsubishi lancer I need wiring radio


i dont have a pic but it goes like this..
(color1/color2 usually means the wire has a stripe or dots on it)

Car Radio Battery Constant 12v+ Wire: Red/Black
Car Radio Accessory Switched 12v+ Wire: Blue
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Green/White
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: Yellow
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): White/Blue
Left Front Speaker Negative Wire (-): Black/Blue
Right Front Speaker Positive Wire (+): White/Red
Right Front Speaker Negative Wire (-): Black/Red
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Yellow/Blue
Left Rear Speaker Negative Wire (-): Gray/Blue
Right Rear Speaker Positive Wire (+): Yellow/Red
Right Rear Speaker Negative Wire (-): Gray/Red

Oct 28, 2009 | 2002 Mitsubishi Lancer

1 Answer

Radio controls and lcd on dash not working unless lights on


The front radio control bezel has failed and needs to be replaced. You can unplug the ETACs ecu and plug it back in and it will wake the panel up, but it will only last a few hours before it happens again.

This is an emerging problem on 08+ Lancers and 07+ Outlanders

Aug 04, 2009 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2008 Mitsubishi Lancer Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...