Question about 2001 Hyundai XG300

1 Answer

Windows will not go down, yes all four - 2001 Hyundai XG300

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

All of your windows run through the main relay in your driver-side door. If the fuse is not the problem (under the dash or under the hood (there's a block in both places)), then you might have a bad relay in the door.
Check those fuse blocks first and then, if you have to, move to the door.
I wish you the best!

Posted on Sep 19, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Can the four window motors in a pointac sunfire (2004) be interchanged?

It is very unlikely that all four window motors have failed at the same time. Your either have broken wires or a faulty master switch

Apr 08, 2017 | Cars & Trucks

1 Answer

Can the four windows be operated ?

Put key in driver side door and turn to unlock hold for 5 seconds and Windows go down.

Feb 12, 2016 | 2010 Volkswagen Routan

1 Answer

I have an EOS VW 2009 and it had 5 window switches in the driver side door to the front windows and back windows and a switch to push all four windows down/up at the same time. But right now my passenger...

Hi Kimberli,

I suspect that since all windows can be powered up and down, you have issues with I believe 2 specific switches you mentioned that have problems - as a result of possible rain water, melting snow / ice or spillage of beverages. You might be able to clean them up - or replace the ones that are "flaky"

Good luck!

Mar 12, 2015 | 2009 Volkswagen Eos

1 Answer

All four of my power windows will not go down

sounds like a module is bad or somemisconnect--u cud scan car to confirm-----chec maxifuses in engine area--also possibl main switch

Feb 05, 2013 | 2006 Dodge Stratus

1 Answer

Drivers side power window motor

Your best shot at an easy fix is to find the broken fourth wire for that rear door, and be able to splice it back together in the door opening, without having to pull the door panel off to get to that or to everything else that could be accessed. Yes, the motor could be jumped from a battery set nearby, but to do so, the door panel has to be removed.
I think there should be four wires to that door. I can think of no logical reason to have four on one rear door and three on the other. Pull all the protective covers away from the wires to look at them closely for a broken wire or broken end of a wire. Good luck. If it rains, you may have to use the plastic sheet over door trick.

Jan 22, 2013 | 1996 Chevrolet Monte Carlo

1 Answer

All four of my windows won't go down

Check the fuse or the switch as a last resort check the window motor

Aug 24, 2012 | 2002 Jeep Liberty

1 Answer

I have power windows in my 1987 Chrysler Fifth Avenue and I was just driving around town, rolled down my front driver's side window and now it won't roll back up. The rest of my windows roll up and down...

this happened to all four of my windows. the inside the door panel there is a gear for the window mechanism, this gear is only made of plastic so due to old age it gets brittle and then the teeth on the gear fall off. its not a big deal though just go to a auto window place...they fixed all four of mine

Oct 28, 2010 | 1987 Chrysler Fifth Avenue

1 Answer

The cable has come off the front passenger window. Can't see how it hooks back onto lifting mechanism.

I had all four of my windows do this on my 2000 bville. There is a small plastic piece that hooks to both ends of the cable and slides up and down the rail to pull the window up and down. This plastic piece broke on all four of my windows and let the cable fall. I fixed it cheap though. I took apart each door and pulled out the motor/slide/pulley assembly and wired it back together with coat hanger wire. It was a lot of work, but beat paying 160 dollars per window for new assembly (that would probably break again!)

Jan 02, 2010 | 2000 Pontiac Bonneville

1 Answer

Replaced passenger side door glass. When you use

What you need to do to initialize the window is remove the window motor from the regulator. Plug it into the car by itself, then press up on the switch until it turns four times. Then hold the switch down for four turns, then put motor back into the regulator, and assemble back into the door. to make sure the motor spins correctly four times I make a tooth on the gear with a marker.

Oct 13, 2009 | 2000 Lexus RX 300

1 Answer

Fixing my 97 cadillac deville power windows

the window switches are in a cluster of four correct? If you hear the motor then the regulator is bad inside the door. if you don't hear the motor then the four cluster switch needs to be replaced. It should be a little over one hundred dollars for the cluster.

Apr 22, 2009 | 1997 Cadillac DeVille

Not finding what you are looking for?
2001 Hyundai XG300 Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides