Question about 1995 Jaguar XJ6

1 Answer

Need instruction on how to install Juguar xj6 1995 driver side window switch and memory

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jaguar Master
  • 22,219 Answers

Their is no memory on this vehicle ,its just a manual up and down controled by the switch ,i cannot find my manual i have put it somewhere safe ?? yes i know ---- i have changed the glass before on my own vehicle as it was scratched by a diamond ring before i had the car given to me ,i could never afford a ring like that iam only a mechanic not a tycoon ,right had a nice walk out to my XJ6 as its in the garage under blankets and had a look ,the switch doesnt come out through the top like some you will have to remove the door panel ,not difficult their is a screw behind door opener under the black plastic trim and one at the bottom of the door closer handle ,then one at the front with a cover over it ,but their could be more its dark out their .as this is a year later than mine its possible it has a full auto but if it has then this is in the actual motor and its not a seperate electronic unit so just remove the door panel then look where the switch is and it has a couple of screws holding the switch assembly on .fairly easy job to do not difficult ,but you must remember to polish it every week and clean the leather with that special stuff once a month and no smoking inside it ,after all it is a jag .

Posted on Sep 11, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Rear window will not close

If the master switch will open and close the windows and the rear switches open them, won't close them, replace both rear switches.

Jun 25, 2016 | 2011 GMC Acadia

1 Answer

How do i fix a drivers side motor

Aaron, if you are talking about driver side power window motor, first check that power is getting to switch, if it is replace power window motor. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Diagnose your Power Window Problem Is the Switch or motor bad
AGCO Automotive Repair Service Baton Rouge LA Detailed Auto Topics...
How To Install Repair Replace Power Window Motor Chevy Impala 00 05 1AAuto...
How to Replace Power Window Motor

Apr 23, 2016 | Cars & Trucks

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII

Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

1 Answer

How to change an electric window power switch?

Remove door panel. Unplug and release switch from back side. Re instal with new switch. Check owner's manual as you may need to relearn the auto stop points.

Apr 30, 2014 | 1998 Volkswagen Golf

2 Answers

Hi the passenger side window rolled down one day and wouldnt roll back up so we did some checking and discovered the motor was good so we figured,and was told it probably was the master switch on the...

Need to get a wiring diagram. Buy a book and follow the wiring schematic. It should help you out majorly. Can't really work on electrical issues without one.

Mar 17, 2013 | 2000 Oldsmobile Silhouette

1 Answer

2003 Lincoln Town Car - Power window switch removal/installation

SECTION 501-05: Interior Trim and Ornamentation 2003 Town Car Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 01/28/2002 Front Door Trim Panel adobe.gif Printable View (206 KB) Removal and Installation
NOTE: LH side shown, RH side similar.
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01.
  1. Remove the window switch plate.
  1. Disconnect the electrical connectors.
  1. ani_caut.gif CAUTION: Use care not to damage the trim panel covers.
    Open the screw covers.
  1. Remove the screws and the assist handle.
  1. Remove screws and the front door trim.
  1. Disconnect the electrical connectors.
  1. To install, reverse the removal procedure.


Apr 02, 2010 | 2003 Lincoln Town Car

1 Answer

1994 Juguar XJ6 Fuel shutoff valve location

Interia switch located at driver's side front door post

Aug 01, 2009 | Jaguar XJ Cars & Trucks

1 Answer

Program factory remote keyless entry 2003 Hyundai XG350

I've informed you of what you need to do. Take the veh into a Hyundai Service Center - let them program the remotes.

May 22, 2009 | Hyundai Motor 2003 XG350

1 Answer

Install instructions for new window switch module

Drivers side. Pull back the trim inside the door handle pocket, uner the trim there is a philips screw, then the window switch with wood trim pops out, disconnect the connector, swop the sprung wood trim and your good to go.

Nov 18, 2008 | 1998 Jaguar XK8

Not finding what you are looking for?
1995 Jaguar XJ6 Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

76649 Answers


Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides