Question about 2007 Ford Ranger FX4 Off-Road

Open Question

Pcv valve location?? ford ranger 2007 4.0L V6

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
michigan man
  • 3533 Answers

SOURCE: pcv valve

AutoZone can help with diagrams

Posted on Jan 18, 2009

Ad
  • 239 Answers

SOURCE: pcv valve

The positive Crank Case Ventilation (PCV) is coming from the intake manifold and usually goes to the Valve cover On that year it could be in the back of on the side of the Rocker covers ( Valve Cover) find the Vacuum line coming out of your intake and follow it, It should lead you to the Pcv

Posted on Jun 17, 2008

Handy Mike
  • 6 Answers

SOURCE: how do i replace the pcv valve on a 2000 explorer xlt v6 sohc?

On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

A good source of information for Ford Explorers can be found here

Posted on Oct 25, 2008

ndguy2481
  • 251 Answers

SOURCE: LOCATION OF PCV VALVE ON

Under hood, center, rear engine area, mounted on upper rear of engine block clearpixel.gif

Posted on Dec 06, 2008

  • 1596 Answers

SOURCE: pcv valve :where is it located on a 1999 ford explorer sport 2wd

Look For A 3/8 th's Vacuum Hose Coming from The Base of Throtle Body Fallow it to the 2 Line PCV At Valve cover

Posted on Feb 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of pcv valve on 2005 ford ranger 4.0


positive crankcase valve is located on the back of the valve cover on the right valve cover i believe if your looking at the engine, you will need to remove some hoses to be able to access the pcv valve, here is a diagram to helpnissankid88_1.gifnissankid88_2.gif

Sep 13, 2011 | 2005 Ford Ranger

1 Answer

Besides taking it to a real mechanic, what's the best way to get to and replace a pcv valve on a '98 Ranger 4 cyl engine?


pcv valve is a simple swap - is located on the top of valve cover towards rear- and under the air intake- you can buy a HAYES manual at a parts store- it will show how to replace the pcv vavle- book about $20,pcv $4-8 .

Jun 20, 2011 | 1998 Ford Ranger SuperCab

1 Answer

Where is the pcv valve located on a 1993 ford ranger xlt 2.3L ?


I'll do my best to explain. The PCV is located center, upper engine area, driver side of engine, between engine block and intake manifold, mounted in vacuum hose. I hope you got that and that it helps you. Good luck.

Mar 24, 2011 | 1993 Ford Ranger SuperCab

1 Answer

Location fo pcv valve on 2001 ford ranger 4 cyclinder 2.3


I think it is in the valve cover. see illustrations from shop manual.



Positive Crankcase Ventilation System Overview The Positive Crankcase Ventilation (PCV) System (Figure 132)cycles crankcase gases back through the engine where they are burned. The PCV valve regulates the amount of ventilating air and blow-by gas to the intake manifold and prevents backfire from traveling into the crankcase. The PCV valve should be mounted in a vertical position. On some applications, the PCV system is connected to the evaporative emission system (refer to the VECI decal). located on the underside of the hood or on the radiator cooling fan shroud.

crankcase ventilation tube
d176823.gif
  1. Remove the positive crankcase vent (PCV) hose from the clips.
cc83fb4.gif

Apr 17, 2009 | 2001 Ford Ranger Regular Cab

3 Answers

Where is the pcv valve located on a 2003 ford ranger


  • The PCV valve can be located in several places. The most common location is in a rubber grommet in the valve cover. It can be installed in the middle of the hose connections, as well as installed directly in the intake manifold.
  • Once the PCV valve is located, make sure all the PCV system hoses are properly connected and that they have no breaks or cracks.
  • Remove the air cleaner and inspect the air and crankcase filters. Crankcase blowby can clog these with oil. Clean or replace such filters.
  • Oil in the air cleaner assembly indicates that the PCV valve or hoses are plugged.
  • Make sure you check these and replace the valve and clean the hoses and air cleaner assembly.
  • When the PCV valve and hose are in satisfactory condition and there is oil in the air cleaner assembly, perform a cylinder compression test to check for worn cylinders and piston rings.
  • Feb 27, 2009 | 2003 Ford Ranger Regular Cab

    1 Answer

    Ford Ranger PCV valve.


    should be on the valve cover... goes into the cover thru a rubber gromet with a vacuum hose attached.

    Robert

    Jan 26, 2009 | 2003 Ford Ranger Regular Cab

    1 Answer

    Does a ford Ranger have a PCV valve???


    it should be on top of the valve cover.. all cars and trucks have them but sum and not many have 1's that never need to be replace..

    Jan 25, 2009 | 2003 Ford Ranger Regular Cab

    1 Answer

    Where is the PCV Valve Located ???


    okay i'm not 100% sure but it should be on top of the vavle cover or near the intake

    Jan 19, 2009 | 2003 Ford Ranger Regular Cab

    1 Answer

    LOCATION OF PCV VALVE ON A 1998 FORD RANGER 4. LITER V6 ENGINE


    Under hood, center, rear engine area, mounted on upper rear of engine block clearpixel.gif

    Dec 06, 2008 | Ford Ranger Cars & Trucks

    1 Answer

    Pcv valve


    the pcv should be on the back side(firewall) of left(drivers) valve cover.

    Oct 26, 2008 | 2005 Ford Ranger

    Not finding what you are looking for?
    2007 Ford Ranger FX4 Off-Road Logo

    Related Topics:

    537 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    77499 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22306 Answers

    fordexpert

    Level 3 Expert

    5626 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...