Question about 2007 Toyota Tundra

Open Question

Where can you add tranny fluid to a 2007 tundra with 5.7 and 6-speed auto?

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 362 Answers

SOURCE: Where do you add transmission fluid to a 2004 toyota tundra auto

You add Transmission fluid through the dipstick tube, you will need a small funnel, you can buy one at a local auto parts store.
With the engine warm and the truck in park and running, pull out dipstick, wipe it clean, replace, then pull out and check level.
Let me know if you need further assistance.
Please rate this solution.
Lone99star

Posted on Apr 03, 2009

  • 202 Answers

SOURCE: Where is the 2007 toyota tundra transmission dipstick

if its a manual transmission you will have a plug on the side of the trany you take the top plug out to check the fluid

Posted on Jun 17, 2009

  • 104 Answers

SOURCE: how to check transmission fluid

you dont, there is no dip stick, you need to remove the fill plug over fill the transmission then remove the check plug and drain the fluid to a trickel and reinstall the plug. would recommed taking to the dealer if your haveing shift issues, or if its leaking. those transmissions dont like to be over/under filled as little as 500ml can cause problems

Posted on Nov 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What type of fluid goes in a 1994 ford xl ranger 5 speed manual transmission?


Typically 90weight, but just ask the autostore. Sometimes in older trannies one might add a qt of automatic tranny fluid to soften the shifting as syncros wear.

Dec 12, 2015 | Ford Cars & Trucks

1 Answer

Transmission problems ... It down shifts too hard


Check fluid level worse case gears aren't sincrenizing properly tranny shop can tell u that when they check fluid level but sounds like tranny going out or your clutch if has one I'd say clutch first before tranny gears if manual tranny if auto then fluid or tranny needs serviced

Feb 21, 2013 | 2007 Honda Odyssey EX

1 Answer

How do you add transmission fluid to a 2007 VW Jetta 2.5L?


There is a brass colored plug facing skyward on the left (US driver's) side at the rear of the 6 speed automatic transmission. This plug is removed with a Torx tool (I cannot recall but is in the range of a #40). This plug provides a direct access to the case of the transmission and if you can find a suitable small funnel (I made an adapter) with a small piece of fuel line, etc. you can introduce ATF into the tranny. The transmission holds about 5 liters of special VW fluid. All the transmission experts I have talked to say to use the VW fluid. It is expensive but less expensive than a new valve body, etc. There is a overflow tower in the drain plug. I changed the fluid by dropping the pan. There is a magnetic plate trap in the pan. It will be covered with metallic particles. VW is dead wrong about "fluid for life". Change it at 80K to 85K miles.

Nov 08, 2012 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

I have a 4 speed auto tranny( D321) in my 1996 chevy cavalier and i just changed the fluid, but dont know how much fluid to put back in


Start with 6 pints and add as needed. Amount varies on several things like drain time and level of tarns when drained.

Jan 18, 2011 | 1996 Chevrolet Cavalier

1 Answer

What type of fluid do i put in my 87 doge ram 50.. tranny fluid needs to be changed it is a 5 speed manual


most manual gearboxes on cars of this age use ep90 gearbox oil.(NOT AUTO TRANS FLUID)

Jan 10, 2011 | 1987 Dodge Ram 50

1 Answer

Can i put a 5 speed transmission from a newer style chev ( ex. 1988 up) into my 1990 suburban?


you can do anything you want, just depends on how much time/work you want to invest. You can bolt a dodge motor up to a cadalic tranni but alot of fabrication will need to be done. Now the engine bolt patteren for the 5 speed and the auto (I assume it's an auto in the 1990) will be the same. But you'll need to add clutch, depending on tranni length maybe driveshafts and even transfercase.

Jun 10, 2010 | 1990 Chevrolet Suburban

3 Answers

Where do you fill the automatic transmission?


If you have a tranny dipstick, then you would need a long tranny type funnel and fill there.
If you do not have a dip stick, then you would have to raise the vehicle, and look at the tranny. There will be a higher and a lower plug on it. Remove the higher plug and stick your finger in the hole. If you feel fluid, then it is full.

Aug 02, 2009 | 2007 Chevrolet Cobalt Coupe

1 Answer

Where is the 2007 toyota tundra transmission dipstick


if its a manual transmission you will have a plug on the side of the trany you take the top plug out to check the fluid

Jun 17, 2009 | 2007 Toyota Tundra

1 Answer

Where do you add transmission fluid to a 2004 toyota tundra auto


You add Transmission fluid through the dipstick tube, you will need a small funnel, you can buy one at a local auto parts store.
With the engine warm and the truck in park and running, pull out dipstick, wipe it clean, replace, then pull out and check level.
Let me know if you need further assistance.
Please rate this solution.
Lone99star

Apr 03, 2009 | 2004 Toyota Tundra

4 Answers

1998 SUNFIRE GT TRANSMISSION PROBLEM


There are 3 transmissions that could be in your car,the 3 speed auto and 4 speed auto overdrive,and of course the manual 5 speed.The 3 speed is designated the 3T40,the 4 speed auto is the 4T40E trans.To check the fluid level,first,the car has to be warmed up to at least 100 degrees Fahrenheit.The car has to be raised in the air,as there is a steel plug in the trans case that has to be removed to check the fluid level.The plug takes an 11 mm or 7/16" socket or wrench and is located on the passenger side of the trans case,near where the passenger side axle engages into the trans.The procedure is to warm the car up to at least 100 degrees,engage the shifter into each gear selection pausing for about 5 seconds in each gear,then remove the plug.If fluid drips out,it is full.If no fluid drips out,add fluid through the top of the trans after removing the red plastic cap,and make sure to use a long funnel to avoid a mess.Add fluid until it drips out the hole.When done,replace the plug and cap.Just a note,a transmission does not "use" fluid like an engine uses oil.If you have to add fluid,that means there is a leak that needs to be repaired.Good luck

Aug 29, 2008 | 1998 Pontiac Sunfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...