Question about Nissan Xterra
I bought Nissan when i drive its showing 4WD oilfilter sign and when i spped up 70mph its hickup and slowdown, advise whats wrong with this car, thanks
Posted on Aug 26, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
please go the above link and you have a video procedure for how to change the sensor.
just do it and you are done to drive your car away.
Posted on Aug 09, 2009
The Camshaft Position (CMP) Sensor detects the position of the camshaft in order to identifiy when piston No. 1 is on its compression stroke. The CMP sensor is used for ignition timing in the Ford DIS igntion system, but not in the EDIS igntion system. Both DIS/EDIS use the CMP signal for synchronizing the firing of sequential fuel injectors.
On the 3.0L vulcan engine, the CMP signal is generated by a single Hall-Effect magnetic switch, activated by a single "vane" spinning around by virture of a synchronized shaft which is driven by the camshaft.
The CMP sensor & synchronizer/shaft are located behind the intake manifold (i.e., back near the firewall on a Ranger) on the top of the cylinder block. If you just need to replace the sensor, it is a simple job of unplugging the electrical connector and removing the screws holding the sensor in place. Here is a sketch of the sensor to give you an idea what to look for:
Posted on Feb 27, 2009
SOURCE: 2002 pt cruiser Camshaft Sensor
change the crankshaft positon sensor in the rear of the engine above the oilfilter. Also check the wiring to this sensor, they have a problem shorting out. You have to change the camshaft and crankshaft sensors at the same time. Make sure you give your car a major tune up. Did you check yor starter?.........runjoe
Posted on Mar 04, 2009
Tips for a great answer:
May 07, 2016 | 2005 Nissan Xterra
Aug 18, 2014 | 2005 Nissan Xterra
Jul 06, 2014 | 2005 Nissan Xterra
Jun 25, 2014 | 2003 Nissan Altima
Aug 09, 2017 | 2005 Nissan Xterra
Sep 26, 2017 | 2005 Nissan Xterra
Nov 25, 2010 | 2005 Nissan Xterra
Aug 11, 2009 | 2005 Nissan Xterra
Jul 05, 2009 | 2000 Nissan Xterra
May 27, 2009 | 2005 Nissan Xterra
456 people viewed this question
Usually answered in minutes!