Question about 1995 Chevrolet K1500

1 Answer

BLOWER MOTER ONLY WORKS ON HIGH SPEED I CHANGED THE RESISTER BEHIND THE GLOVE BOX STILL THE SAME HOW EVER THE AIR RESURCULATE SWITCH DOES NOT LIGHT ANY MORE

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 45 Answers

Might change the high speed relay first it is also behind the glove box. the normaly colsed contact may be dirty.

Posted on Sep 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the resister located


on the firewall close to the blower motor usually

Feb 29, 2016 | 2010 Ford F-150

3 Answers

My fan blower motor only works on high,They say it maybe the resistor may be bad, where is it ? Thanks, Jim


Hi, the resistor is screwed to the side of the blower housing behind the glove box. See procedure below to replace the resistor. You don't have to complete all steps in the procedure. just work your way to the point that you can unscrew the resistor. Please let me know if you have questions, and thanks for using FixYa.

1990-93 Accord

See Figures 2, 3 and 4
  1. Disconnect the negative battery cable. If so equipped, disable the Supplemental Restraint System (SRS).
  2. Remove the glove box.
  3. Remove the glove box frame (lower support)

jturcotte_1481.gif

Fig. Fig. 2: Remove the glove box and frame

  1. If not equipped with air conditioning:
    1. Remove the three screws and remove the heater duct.
    2. Remove the blower mounting nuts. Unplug the wiring from the blower motor, resistor and recirculation control motor, then remove the blower assembly.

  2. If equipped with air conditioning:
    1. Lift the carpet in the passenger compartment. Remove the side cover (kick panel).
    2. Remove the control unit bracket nuts; unplug the five connectors and remove the control unit bracket.
    3. Remove the retaining band, then remove the blower lower covers. Do not break the tabs on the lower covers.
    4. Remove the retaining nuts and remove the blower assembly.
jturcotte_1482.gif

Fig. Fig. 3: Air conditioned models require the removal of the control unit. Handle it carefully


jturcotte_1483.gifjturcotte_418.jpg

Apr 04, 2011 | 1993 Honda Accord

1 Answer

Front blower won't work but rear does.


Replace the blower moter resister. Its behind the glove box. the part is only $15 or so and is real easy to replace. Buy the part first, then you know what to look for behind the glove box. Replaced mine twice already. Think first one replaced was faulty.

Feb 21, 2011 | 2005 Chrysler Town & Country

1 Answer

My ac/heat nob on dash only works on High, but not the 3 lower speeds, Why?


sounds like your blower resister is burnt up ,it should be located near the blower in the air ducting ,normally undr and behind the glove box.

Oct 12, 2009 | 2002 Dodge Stratus

4 Answers

What will make a blower in a car only work on high 0n a 1996 sunfire


Could be two things. Heater control..or heater switch. Or the moter is not recieving the reostat info from control. Check at heater wher wires go into it..as you change positions of switch you should see a voltage drop or increase, if u do then the moter is bad...if u do not then replace the heater control unit. :)

Sep 07, 2009 | 1996 Pontiac Sunfire

2 Answers

F150 2004 blower working only on high position.


this is because your blower motor resisters are burned out for speeds 1,2 & 3. High speed does not have a resister.

Replace the resister. If it goes a 2nd time, it is because your blower motor is failing & drawing too much current.

it is behind the glove box I think. It is in the plenum case where air blowing on it keeps it cool.

Easy repair. May need to access throught glove box which should open all the way down when you squeeze the sides in.

Go to tascafordparts.com for a discounted resister.
Please rate as solved problem if this is what you needed.

------------------------------------------------------------------------------
Manual Climate Control System Outputs
Blower Motor Switch Resistor
Blower Motor Resistor Coils 9ba1105.gif Blower Motor Thermal Limiter 47afe58.gif The heater blower motor switch resistor has the following features:
  • The assembly is located on the passenger side of the plenum assembly behind the glove compartment (06010).
  • Three resistance elements are mounted on the resistor board to provide four A/C blower motor speeds.
  • Depending on the heater blower motor switch position, series resistance is added or bypassed in the A/C blower motor circuit to decrease or increase A/C blower motor speed.
  • An overheating protective device (thermal limiter) will open the resistor coil circuit when the temperature reaches 121°C (250°F), interrupting the blower motor operation in all speeds except HI.
  • The thermal limiter cannot be reset and is not serviceable.

Mar 23, 2009 | 2004 Ford F150

3 Answers

Front blower motor on 2002 dodge grand caravan sport only works on high speed


it's the blower motor resistor , it's behind the glove compartment, just make sure you disconect the neg. for battery first, open the glove comp. and pull the rubber stops towars the center so you can let the glove comp. hang all the way to the floor , the resistor it's in front of you, disconect the two conectors there's one big with 6 0r 8 wires coming out and another with only two, take them out by pressing on the side of each one, remove it , put the new one on , conect the battery and your done. it's about $ 13.00 at o'riellys auto parts .

I hope this fix yor problem.

David M.

Mar 13, 2009 | 2002 Dodge Grand Caravan

2 Answers

Front blower motor doesn't work, rear does


yes, all blower motors have them to control their speed, High, medium, low.. etc. I earn nothing by helping you, but my rating, a fixya rating and I will walk you through this

Dec 20, 2008 | 2005 Chrysler Town & Country

1 Answer

Blower moter only works on high no air or heat


Replace the "Blower Motor Resistor".Check autozone or ford dealership.It is located behind the glove box to the left.Open glove box and push the sides in to lower it.Follow the electrical connector back to the resistor. There should be one screw holding it in.Good Luck!!!

Aug 04, 2008 | 2000 Ford Focus

Not finding what you are looking for?
1995 Chevrolet K1500 Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...