Question about 2007 Jeep Commander Rocky Mountain

Open Question

Where is the iod fuse located on 2007 jeep commander

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1051 Answers

SOURCE: Where is the Fuse located for the Radio/Cigarette

I'd suggest you go to and register for free. Once registered you'll have access to dozens of repir manuals, some with detailed instruction to make DIY repairs.

Posted on Dec 16, 2010

  • 60 Answers

SOURCE: 95 jeep wrangler 4x4 6cyl. no spak from coil and

you have a short in the ign. circut

Posted on May 11, 2009

  • 133 Answers

SOURCE: 2007 jeep commander rocky mountain no sound from radio

take it to the dealer. they will put a new radio in it if you have under 36000 miles

Posted on Sep 12, 2009

  • 832 Answers

SOURCE: I need fuse location for windshield washer on 2006

Normally all fusebox are properly labelled (labelled as washer or accessories) But to be sure, you can check all the fuse for busted ones, by running a continuity test for each of the fuses, using a multi-tester. Set the multi-tester to Ohms 1 x 10 or 1 x 100. Take the fuse one at a time and put the probe one to each fuse contacts. The reading should be
zero for good one and no movement for busted ones.

Posted on Nov 04, 2009

  • 17970 Answers

SOURCE: can't locate the fuse cavity for the nav/radio on

If I don't misteke, is the cavity 1 (MiniFuse 30 Amp "green") for Audio Amp with BRK.

Review the WK Owners Manual (page 393 for Fuses and Description)

Hope helped with this; remember rated this help. Good luck.

Posted on Nov 26, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to reset/fix B2100 Code in 2007 jeep commander

B2100 code. this is a bumm code ( P2100 cry) B2100 low battery.
three is no b2001 in the 7000 pages, just looked,

well what if its real and dont want to reset.?
yes, we do that, and see if t comes back. as most do.
the answer is same on all cars 1996 to now, heck back to 93 in fact.
answered 100s of time, here goes again.
  1. press the reset button in the OBD2 scan tool, works 93 to 2016 all cars, in usa.
  2. pull the cars battery neg lug for 5min., the can have the bad effect of losing all programming on radio, nav, and things. mirro loc, seat memory, on and on an on, pain.
  3. or PULL the IOD fuse on PCM. fuse # PDC fuse 20 is IOD for PCM . this is the PCM memory wire, when the fuse is pulled the PCm forgets, stored error codes.
#1 always works and works best.

the free fsm covers all that. wk, jeep

i have this car so , its not new to me.

Oct 05, 2016 | Jeep Cars & Trucks

2 Answers

1999. Why does the 15 amp IOD fuse keep blowing?

have an auto electrician check it over for a short or overload,could be any of a number of things . the systems that become active with the turning of the key may be the source of the problem. could be a short in the wiringgbehind the instrument binacle

Jul 09, 2015 | Jeep Cars & Trucks

1 Answer

Where is the i o d fuse located

why do you ask this> must we guess the context?
you found the IOD word, congrats !
this is Ignition off Draw. (100% hot full time power feeds)
these are the fuses that the Jeep factory pulls just before shipping
car so the battery dont drain, New jeeps.

they operate all computers on board, PCM/BCM, radio, NAV, etc, to the max on newer cars,
these are mostly memory fuses so the brain on the end DONT FORGET its programming, Errors and configurations and learn modes.
2000 Compass,. what engine, what IOD do you want?

so if confused, why not read the FSM
the FSM covers all that. the factory service manual.
or at a real jeep page. here RTM

i will now give one example from the book on IOD.
just 1.

the operators guide in the glove box has this ,as does the TIPM its self marked.
6 of em in read , below;.


context: what is the job.?
battery drains parked
need to reset learn modes?
resetting DTC with no scan too>?

Oct 04, 2014 | 2008 Jeep Compass

1 Answer

Where is the iod fuse

which one of the 6?
why ask. why not put this in context? just curious>? why?

its in the operators guide, and in FSM.
each puter brain in car has an OID, even NAV.
radio, pcm, bcm , TIMP, and more.
its the memory keep alive circuits. !!

Jul 24, 2014 | 2009 Jeep Commander

1 Answer

How do you reset a 2007 Jeep Grand Cherokee computer to the factory default settings?

we've posted the 4 ways, 100s of times now.
1: scan tool push reset.
2: pull the PCM memory fuse, IOD (name of fuse)
3: pull neg battery term for 5min, and mess up radio, and things.
4: drive them off per the SM the service manual tells you how to drive off each DTC, both time and number of trips.

why not read the manual, its free, and read.
unlike the spam above.
here it is for the 400th time. its not fake its real.

USA cars, and gas engine.

Jul 01, 2014 | 2007 Jeep Grand Cherokee

1 Answer

Commander horn fuse

don't have a owners manual? go here.

the fuse u want is in the underhood fuse box
Fuse #16 a 20 Amp Yellow fuse

Jun 03, 2010 | 2007 Jeep Commander Rocky Mountain

2 Answers

Speedometer not working

Hi there is a speed sensor on the rear diff and it is located in the center above the differential. the wires that go to that sensor break. reconnect those wires and problem solved

Jan 30, 2010 | 2002 Jeep Liberty

2 Answers

Can't locate the fuse cavity for the nav/radio on my 2007 jeep commander

there are alot of fuses that control radio/ nav system with a few computers, if you use a scan tool to scan computer it will give you codes of what is wrong, anyway here are the fuses i found, left side of engine compartment # 26 is one fuse then left side of dash theres another fuse/relay box and at #16 and #1 are two more fuses then there are more fuses for modules and computers than run that system, good luck hope this helps.

Nov 26, 2009 | 2007 Jeep Commander Rocky Mountain

1 Answer

2007 Rubicon radio will not come on

Check the IOD fuse in the engine back it is a double 10 amp fuse with a pull up tab. If that is good you need a radio should still be under warenty.

Jul 13, 2009 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

Motor will not turn over

could be the wcm. just for fun remove the IOD fuse in the TIPM for aprrox. 10 secs. reinstall and should start if its the wcm

Jan 09, 2009 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2007 Jeep Commander Rocky Mountain Logo

Related Topics:

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides