Question about Acura CL

1 Answer

Plug wires got mixed up on d cap end and i dont know how to figure out where they go. 1997 Acura cl 2.2

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 642 Answers

Remove the spark plugs. Block the number 1 cylinder hole with your hand(LHside of engine) . Rotate the engine by hand/wrench. As soon as you feel air coming out of the hole rotate the engine until you feel it to start sucking on your hand. Look at the position of the rotor(remove the distributor cap). This is the number 1 plug lead position. Moving clock wise connect cylinders 1-3-4-2 in that order.

plug wires got mixed up - 8d4092d.jpg

Posted on Sep 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Whats code p1156 for acura cl 1998


http://realfsm.com/

FREE ONLINE AUTO MANUALS AND WIRING DIAGRAMS.

Dec 06, 2014 | 1997 Acura CL

1 Answer

97 Acura CL D4 light flashing


You change the transmission control molcule (TCM).

Jul 26, 2013 | 1997 Acura CL

1 Answer

Where is the egr valve on a 99 acura cl


right side under front park plug wires at curv
you might have a plastic cover to remove first
the EGR is located on the end of the head on transmishion side
has plug on top and 2 nuts holding it on

Sep 18, 2010 | 1999 Acura CL

1 Answer

I have a 97 acura 2.2 cl. I want to change my spark plugs. how do i replace them seeing that they are deep in the block. tried removing the wires but kind of hard don't want to damage them. Please help.


1.Just use a spark plug range, but you must remove all the ignition wires. Put a label or number to each of the wires, so that you will put it in their proper places after you change the spark plugs.
2.Using a spark plug range will get the plugs deep in
the blocks.
3.Before you install the replacement plug, you must adjust the spark gap of the plugs to the thickness of
a hacksaw blade.
4.After installing the spark plugs, replace the ignition
wires to it's proper places.
5.then, you can get you car to start.

Nov 04, 2009 | 1997 Acura CL

1 Answer

Can someone with minor car repair expierience fix a CV joint in a acura cl 1997


Very easy fix but will take sum time and specialty tools. If you have the tools just start tareing into it. If you dont, take it to the dealer. If you need step by step instructions I can help.

Jul 26, 2009 | 1997 Acura CL

1 Answer

Acura cl seat goes forward but not back


you could have a broken wire or a bad seat motor.

Jul 12, 2009 | 1997 Acura CL

2 Answers

Can get the radio to come on don't know the code and I'm getting an error message


This happened to me. You have to call Acura and fax them a copy of your driver's license & the vehicle registration. You then call them back in 24 hours and they will release the code for your radio. It's a bit of a hassle, but at least you'll know the code!

Apr 13, 2009 | 1997 Acura CL

2 Answers

SRS light on 1997 acura CL


1.bend a paperclip into a u shape. 2.disconnect the yellow plug in your fuse box under the steering wheel and insert the paperclip into the plug that is now hanging there to complete the circuit.3.turn the ignition on and the srs light will stay on for 6 seconds, then turn off.disconnect the paperclip within 4 seconds after that and the light will come back on.4. reconnect the paperclip within 4 seconds and the srs light will turn off again.5.within another 4 seconds of it going off, disconnect the paperclip and the light will blink letting you know that you have completed all the steps right. you can also use some speaker wire

Feb 01, 2009 | 1997 Acura RL

1 Answer

CHECK ENGINE LIGHT DURING MONITOR TEST ON 1997 ACURA RL


replace the O2 sensors . Some cars have 2. At the intake and out take manifolds. they are spark plug shaped components.

Jan 16, 2009 | 1997 Acura CL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...