Question about 2005 Honda CR-V

1 Answer

How can I replace the low-beam halogen bulbs? I took off the dust cover, but not sure how to proceed. Very tight quarters...is the whole light sockets assembly to be lifted out first? ... or do I work in place, removing clip (?!) and pulling out the bulb socket?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 89 Answers

Call me 8328673764 i will explain for u..

Posted on Sep 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 1993 4x4 Jackaroo right hand head light no high beam can the bulb be changed or do i have to buy the whole light fitting.


sealed beams went out when quartz halogen bulbs came in
remove the rubber cover at the back , disconnect the wire socket , release the retainer and lift the bulb out

Nov 19, 2016 | Cars & Trucks

1 Answer

What is the easiest way to change a low beam bulb on a 2007 aura


LOOK IN GLOVE COMPARTMENT FOR OWNERS MANUAL.LOOK IN BACK INDEX OF MANUAL FOR BULB REPLACEMENT OWNERS MANUAL WILL SHOW AND TELL YOU HOW TO REMOVE AND REPLACE BULBS. BE SURE TO WEAR CLEAN LATEX GLOVES WHEN HANDLING THE BULBS BECAUSE BOTH LOW BEAM BULBS AND HIGH BEAM BULBS ARE HALOGEN IF TOUCH WITH HANDS OILS FROM SKIN WILL CAUSE HALOGEN BULBS TO OVER HEAT AND BLOW. HALOGEN BULBS NOT CHEAP THEY COST RANGE $10.00 TO $20.00

Sep 02, 2011 | 2007 Saturn Aura XR Sedan

1 Answer

I have a 2005 chev impala can i replace my high beams headlights with just low beam lights


NO YOU HAVE TO REPLACE HIGH BEAM LIGHT BULBS WITH HIGH BEAM LIGHT BULBS BECAUSE HIGH BEAM LIGHT BULBS AND LOW BEAM LIGHT BULBS TWO DIFFERENT TYPES OF BULBS.WEAR CLEAN LATEX GLOVES HANDLING THE HEADLIGHT BULBS WHICH IS HALOGEN LIGHT BULBS, OIL FROM FINGERS OR HAND WILL CAUSE HALOGEN BULBS TO OVER HEAT BLOW OUT.

Jul 05, 2011 | 2005 Chevrolet Impala

1 Answer

Driver side low beam bulb replacement


LOOK INSIDE OWNERS MANUAL IN GLOVE COMPARTMENT.LOOK IN THE BACK INDEX FOR BULB REPLACEMENT.IT WILL SHOW AND TELL YOU HOW TO REPLACE BULB.BE SURE TO WEAR CLEAN LATEX GLOVES WHEN HANDLING HALOGEN HEAD LIGHT BULBS.BECAUSE OILS FROM FINGERS OR HANDS WILL CAUSE HALOGEN BULBS TO OVER HEAT AND BLOW OUT.

Jun 23, 2011 | 2007 Saab 9-3 Aero Convertible

1 Answer

How do I remove halogen low beam head light to replace it?


Removal & Installation To Remove:
WARNING
The halogen fog light bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope.
NOTE: The headlight bulb should not be removed from the headlight assembly until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlight bulb performance. Contaminants may enter the headlight assembly where they can settle on the lens and reflector. Never turn on the headlights with the bulb removed.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section. NOTE: Make sure that the headlight switch and the ignition switch are in the OFF position.
  2. Remove the pin-type retainers, screws and the air deflector from the radiator.
  3. Remove the three bolts and the headlight assembly.
  4. Disconnect the electrical connector.
  5. Remove the cover from the rear of the headlight assembly.
  6. If equipped with HID, release the spring tabs to remove the low beam bulb, otherwise disconnect the electrical connector and remove the bulb.
  7. Disconnect the electrical connector and remove the high beam bulb.
HID low beam headlight bulb lin_tc_0085.gif

Standard low beam headlight bulb lin_tc_0086.gif

High beam headlight bulb lin_tc_0087.gif

To Install:
  1. Place the headlight assembly in the proper position.
  2. Install the cover from the rear of the headlight assembly.
  3. Connect the electrical connector.
  4. Install the three bolts and the headlight assembly.
  5. Install the radiator air deflector.
prev.gif next.gif

Dec 18, 2010 | 2003 Lincoln Town Car

1 Answer

How to replace low beam bulb


If you have halogen lights:

-Turn off the lights and the engine. Open the hood. Beware! The fan propeller may still start even the engine is off!. Better to wait until the engine has cooled down (some ½-1 hour).
-Remove the stopper (usually a black plastic cover) and the bulb connector from the head light assy. The low beam is the middle one.
-Remove the spring. Push it to the right to loosen and then out-/downwards.
-Pull out the bulb and dispose properly.
-Put a new bulb in place - it only goes in one way. Do not touch the glass - this will reduce the life span of the bulb.
-Replace the holding spring. Make sure it 'catches' the locking position.
-Reconnect the wires connector.
-Replace the stopper.

The owner's manual you can obtain free online.

Hope this helped.

Jan 16, 2010 | 2001 Volvo S80

1 Answer

How do you remove the headlamp housing


First thing is to unfasten the radiator cover, yes, the whole cover. Then remove the two bolts that hold the headlamp housing, carefully pull out headlamp housing. I just changed my front right low beam headlight today. Took me two hours, reading the kia manual word for word, and a few curse words, but I it is done. Just be careful if you have a halogen light bulb, DO NOT TOUCH THE BULB with your hands or fingers. I suggest you wear gloves or hold it only at the base, or you will have to go get a new one. Good luck

Dec 31, 2009 | 2006 Kia Sedona

1 Answer

2004 IS 300 - does it have HID or Halogen low beam lightbulbs?


Your low beam is a HID bulb, number D2R, and your high beam is a halogen 9005 bulb

Jul 27, 2009 | 2002 Lexus IS 300

3 Answers

Change low beam


Headlamp Removal & Installation Bulb Replacement To Remove:
CAUTION
Halogen bulbs contain pressurized gas. Mishandling a bulb may result in the bulb shattering into flying glass fragments.
CAUTION
Make sure to wear eye protection when handling a halogen bulb.
CAUTION
Do not touch the glass of a halogen bulb, only handle the bulb by the base.
CAUTION
Do not allow a halogen bulb to come into contact with dirt or moisture.
CAUTION
Make sure to dispose of a used halogen bulb properly.
CAUTION
Do not allow children to handle halogen bulbs.
  1. Turn the lamp switch to the off position.
  2. Make sure the bulb is cool before changing.
  3. Remove the headlamp assembly from the headlamp panel.
  4. Remove the rear access cover from the headlamp assembly.
  5. Disconnect the headlamp connector.
  6. Remove the bulb from the headlamp assembly by rotating the bulb and socket counterclockwise.
To Install:
  1. Connect the headlamp connector.
  2. Install the bulb into the headlamp assembly by rotating the bulb and socket clockwise.
  3. Install the rear access cover onto the headlamp assembly.
  4. Install the headlamp assembly into the headlamp panel.

Jul 16, 2009 | 2004 Chevrolet TrailBlazer

3 Answers

REPLACEMENT OF [LOW BEAM] HALOGEN BULB IN 2004 Buick LeSabre


I just Replaced a Low Beam Light bulb on a 2005 Buick La Sabre.

If You use a Metric socket and Remove the Two Silver bolts Attaching the headlight Assemble onto the metal surrounding the the lamp assembly it comes out to the front. This makes it much easier to access the bulb. Twist it counerclockwise & it comes out by pulling gently on the bulb. Then by realeasing a tab that is the socket holder bulb can be removed & replaced with a New #9006 low beam halogen light bulb. Wrap a Paper towel around the bulb & do NOT touch it with your bare hand as this wiil ruin a halogen bulb,

Jan 22, 2009 | 2004 Buick LeSabre

Not finding what you are looking for?
2005 Honda CR-V Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...