Question about 1992 Toyota Camry V6

1 Answer

I have a 92 camry 4cyl. Won't fire at the sparkplug. Replaced plug wires and plugs, distributor, igniter and still won't fire. Any suggestions?

Posted by on

  • allen_kersha Sep 12, 2010

    I already know it doesn't fire. I've replaced spark plugs, wires, entire distrbutor(cap, rotor, etc.) and igniter. Still won't fire.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 197 Answers

Take out a spark plug, lay the plug (with the spark plug wire attached)on the engine and turn the motor over, if it sparks, your getting fire, Try each plug, works best a night so you can see the spark.

Posted on Sep 11, 2010

  • 1 more comment 
  • allen_kersha Sep 12, 2010

    I already know it doesn't fire. I've replaced spark plugs, wires, entire distrbutor(cap, rotor, etc.) and igniter. Still won't fire

  • connellyjame Sep 12, 2010

    Does the engine turn over? If it doesn't then we have to look at a wireing problem. I will look into wireing problems and send what I think is the probable cause Monday. Don't give up.

  • connellyjame Sep 12, 2010

    Check out 2carpros on the internet.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 Cherokee will crank but won't fire. Replaced


how much is the RPM showing in the datatlogger while cranking?

Dec 03, 2012 | Cars & Trucks

2 Answers

My 92 Accord LX stopped running, I replaced plugs, wires, distributor cap, fuel pump and car still won't start


You will need to check for spark disconnect a sparkplug wire at the distributor and leave a 1/4 air gap,crank the engine, do you see a spark,if you have spark then solve for no fuel this can stem from a needed fuel pump that has failed.

Mar 10, 2012 | Honda Accord Cars & Trucks

1 Answer

1999 chevy k2500. changed spark plugs 4 times in 7 months. Runs good for a week then doesn't start. Changed spider, throttle body sensor. Still has no codes and once again won't start.


The next time it won't start ,pull a sparkplug wire and see if you're getting fire.Then we'll known whether its a ignition or fuel problem and go from there.

Jan 11, 2012 | 1999 Chevrolet K2500

2 Answers

92 civic engine stalled while driving; fuel pump works; replaced all plugs seeing some oil on old ones. only one plug fires; is coil still working? or the distributor? haven't checked fuel...


Hi,
Check the ignition distributor cap and clean the electric contact points it might be already dirty.

if one has a spark that means your ignition coil is still okay. Remove the whole cap and check the inside part and clean it, use emery board.
Check also the high tension wires( spark plug wires ).
Hope Fixya helps you!

Aug 28, 2011 | 1992 Honda Civic

1 Answer

Get fire every where else but through distributor and plugs spins over fine changed distributor, plug wires, coil, and ignition coil and still won't start what else to do i checked for bad grounds and...


You have problem with you timing or did you ever label all the high tension wire before you unplug it. it might be re arrange the firing sequence. 1342 firing order. And the timing position of the distributor were at original place.

Aug 16, 2011 | 1987 Nissan Pickup

5 Answers

Truck wont crank. we have put new distributor cap, rotor button, coil pack, plugs, wires, and fuel pump. we also checked our firing order.


you said you repl dist cap that means you don't have a crank sensor you have electronic ing module. remove your elec ing module have it tested most auto parts stores could test your module, or check your coil at the neg terminal. should have power. if not you lost your primary volt from your batt.your secondary power is coming from your electronic ing module from the module to the pos terminal on the coil, when the eng cranks,from the coil to the dist cap , from the dist cap center to the rotor then out to the plugs,this all happen pervided the timing belt or timing chain is ok. the cumbustion chainber needs 3 things , thats fuel, air, and spark.

Apr 17, 2011 | 1996 Chevrolet K1500

1 Answer

Where are sparkplugs located on the camry? want to do my own tune up.


SPARK PLUGS IN THE CYLINDER HEAD.FOLLOW SPARK PLUGS WIRES.THEY WILL LEAD YOU TO THEM.BE SURE CHANGE PLUG WIRES DISTRIBUTOR CAP AND ROTOR IF EQUIPPED.SOME MODELS HAD DISTRIBUTORLESS IGNITION SYSTEM.

Jun 30, 2010 | 1994 Toyota Camry

5 Answers

No spark in 93 toyota camry 4cyl


The Toyota 4 cylinder engines have a problem with the electronic units inside the distributor. You will need to replace the entire distributor to fix the problem. You can get aftermarket distributorsat ebay or similar sites for alot cheaper than the originals. It's an easy swap that will take about an hour to do if you are mildly mechanically inclined.

Aug 12, 2008 | 1993 Toyota Camry V6

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...